Difference between revisions of "Scilab/C4/Discrete-systems/English-timed"

|| Time

|| Narration

| 00.01

|Dear Friends,  

| 00.02

| Welcome to the Spoken Tutorial on  ''' “Discrete Time System” '''

| 00.07

| In this Tutorial we will learn to

|00.09

|Convert between ''' state space and transfer function''' descriptions 

 

|00.14

|Define a ''' discrete time system and plot its step response '''

 

| 00.20

| ''' Discretize a continuous time system'''  

|00.23

|I am using ''' Ubuntu 12.04''' operating system and  ''' Scilab 5.3.3''' for demonstation

 

| 00.31

|To practise this tutorial, you should have basic knowledge of ''' Scilab.'''

| 00.36

| If not, please refer to the Scilab tutorials available on  ''' spoken-tutorial.org '''  

|00.44

 

|00.46

| 00.49

| 00.52

| is specified by ''' sys three is equal to syslin into bracket into quotes c comma A comma B comma C comma D close bracket'''

|01.05

|for prespecified ''' matrices A, B, C and D''' of suitable sizes.  

 

 

|01.11

| Start ''' Scilab''' on your computer  

 

|01.15

 

|Type '''sys three is equal to syslin into bracket into quotes c comma four comma three comma six comma nine close bracket and press Enter. '''  

 

|01.32

 

|'''Press enter to continue the display.'''

 

|01.35

|This is an example for '''single state, Single Input Single Output'''

 

 

| 01.40

 

|The output will have matrices  ''' A, B, C and D and initial state x zero'''

 

 

| 01.49

|Type '''clc ''' to clear the '''console'''

 

|01.52

 

|Define for example matrices ''' A, B, C, D''' on '''Scilab console''' as you see  

 

|02.00

|''' A is equal to open square bracket two space three semicolon four space five close square bracket'''

 

|02.09

 

|'''Press enter'''

 

 

|02.11

 

|''' B is equal to open square bracket one semicolon two close the square bracket'''  

 

 

|02.17

|'''Press enter '''

 

| 02.19

 

|02.27

 

|And '''Press enter'''

 

|02.30

 

| ''' D is equal to two '''

 

|02.33

 

| '''Press Enter'''

 

| 02.35

 

|Let us substitute these matrices in the previous command  

 

| 02.39

|''' sys four is equal to sys lin into brackets into quotes c comma A comma B comma C comma D close the bracket and press enter'''

 

|02.57

|03.00

| Press enter to continue the display.   

 

| 03.03

|The output will have ''' matrices A B C D and initial state x zero ''' as you see

| 03.11

|Check whether '''poles''' of ''' sys4''' are same as '''eigenvalues''' of '''A .'''

 

 

| 03.17

|For this you can use '''p l z r function''' and the '''spec function'''  

| 03.23

|The ''' s s two t f''' command can be used to obtain a '''transfer function of a state-space system sys S S. '''

|03.33

|Type on your '''Scilab Console''' '''clc to clear it'''

 

| 03.37

 

|And then ''' type sys capital T capital F is equal to s s two t f into bracket sys four close the  bracket ''' and  

 

| 03.50

|'''Press enter'''

 

 

|03.52

 

|You see this output  

 

| 03.54

| It is in the form ''' sys TF equal to ss two tf into bracket sys of SS'''

 

| 04.01

 

|Use '''ss two tf''' function for '''sys three''' defined earlier  

 

 

| 04.12

 

| It is not applicable to '''sys four''' as it is in '''state space form'''  

 

|04.18

 

||Solve the following exercise  

 

 

|04.20

 

|Find a ''' state space realization''' of the '''second order transfer function''' defined below  

 

| 04.26

 

|Use ''' t f two s s''' command  

 

 

 

| 04.30

 

|For the new ''' system''' in '''state space form, say sys S S''', check if the eigenvalues of the matrix A and the poles of the '''transfer function G of s''' are the same.  

 

 

| 04.43

 

|Use the '''A, B, C, D matrices''' of the ''' system sys S S ''' to obtain the ''' transfer function'''   

 

| 04.56

 

|We now define a ''' discrete time system.'''

 

 

| 05.00

 

|It is customary to use ''' ’z’ ''' for the variable in the '''numerator and denominator polynomials.'''

 

 

| 05.07

 

|Recall that the variable ''' ’z’''' has a shortcut  

 

| 05.11

 

|Instead of ''' z is equal to poly into bracket zero comma inside quotes z :''' use ''' z is equal to percentage z'''

 

 

| 05.21

 

 

|05.23

 

|Type '''clc to clear'''

 

| 05.26

 

|Type ''' z is equal to percentage z.'''  

 

| 05.29

 

| And '''press enter'''

 

 

| 05.31

 

|We now define a first order discrete time system  

 

| 05.35

 

|On the ''' Scilab Console''' type

| 05.39

| ''' D T System is equal to syslin into bracket into quotes small d comma z divided by inside bracket z minus zero point five close the bracket close outer bracket . '''

| 05.59

|''' Press enter'''

 

| 06.02

 

|We use the ''' ’syslin’ '''function for this

 

 

 

| 06.05

 

| This time, we specify the ''' domain to be discrete time,''' instead of '''continuous time.'''

 

 

 

| 06.13

 

| For checking the ''' step response,''' we have to define the '''input''' explicitly as '''ones,'''  

 

 

| 06.19

 

|for example, for '''50 points.'''  

 

| 06.22

 

| Type on the ''' Scilab Console'''

 

 

| 06.25

 

|''' u is equal to ones into bracket one comma fifty close the bracket put a semicolon'''

 

 

| 06.36

 

|And '''Press enter'''

 

 

| 06.38

 

|Instead of '''csim,'''  we have to use the '''’flts’''' function to '''simulate this system.'''

 

| 06.45

 

|Type on the '''Scilab Console '''

 

| 06.48

 

|'''clc to clear the console'''

 

| 06.51

 

|''' y is equal to f l t s into bracket u comma D T System close the bracket put a semi colon'''

 

| 07.02

 

|And ''' Press enter'''

 

| 07.05

 

|Now type ''' plot of y and  press Enter '''

 

 

 

| 07.11

 

 

| 07.14

 

|Close the graphic window  

 

 

| 07.17

 

 

| 07.21

 

|This is done using the '''dscr function.'''  

 

| 07.25

 

|Let us define a continuous system ''' s is equal to percent s''' and

 

| 07.32

 

|'''sys G is equal to syslin into bracket into quotes c comma two divided by into bracket s square plus two multiplied by s plus nine close bracket close outer bracket and press enter '''

 

 

 

| 07.56

 

|Let us '''discretize the system sys G''' with a '''sampling period of zero point one.'''

 

| 08.04

 

|On the ''' Console''' type ''' clc to clear''' and then type

 

| 08.08

 

|''' sys five is equal to d s c r into bracket sys G comma zero point one close the bracket and then press Enter'''

 

 

| 08.25

 

|''' Press enter to continue display'''

 

| 08.44

 

|We can convert this to a '''transfer function representation in discrete time''' using ''' s s to t f''' function  

 

 

 

| 08.54

 

|For this go to the ''' Scilab Console Window'''

 

| 09.01

 

|'''Now type sys six is equal to s s two t f into bracket sys five comma zero point one close the brackets and press enter '''

 

| 09.22

 

| In this tutorial we have learnt to:  

 

 

| 09.24

 

|Convert between '''state space and transfer function descriptions'''

 

| 09.28

 

|Define a ''' discrete time system and plot its step response'''

 

| 09.33

 

|'''Discretize a continuous time system.'''

 

|09.36

| Watch the video available at the following link

 

| 09.39

 

| It summarises the Spoken Tutorial project  

 

 

 

|09.43

 

||If you do not have good bandwidth, you can download and watch it  

 

|09.47

 

||The spoken tutorial project Team

 

|09.49

 

||Conducts workshops using spoken tutorials  

 

 

|09.52

 

||Gives certificates to those who pass an online test  

 

 

|09.56

 

||For more information, please write to contact@spoken-tutorial.org  

 

 

|10.04

 

|Spoken Tutorial Project is a part of the Talk to a Teacher project  

 

 

 

| 10.15

 

|More information on this mission is available at spoken-tutorial.org/NMEICT-Intro

 

| 10.27

 

|This is Anuradha Amruthkar from IIT Bombay signing off.

 

|10.31

 

| Thank you for joining Good Bye.