Difference between revisions of "ExpEYES/C3/Steady-state-response-of-circuits/English-timed"
From Script | Spoken-Tutorial
Sandhya.np14 (Talk | contribs) |
|||
| (One intermediate revision by one other user not shown) | |||
| Line 11: | Line 11: | ||
|In this tutorial, we will study: | |In this tutorial, we will study: | ||
| − | + | '''AC phase shift''' in '''RC, RL''' and '''LCR''' circuits. | |
| − | + | Calculate '''Phase shift''' values and | |
| − | + | Show '''circuit diagram'''s for our experiments. | |
|- | |- | ||
| Line 21: | Line 21: | ||
| Here, I am using: | | Here, I am using: | ||
| − | + | '''ExpEYES '''version 3.1.0 | |
| − | + | ||
| − | + | '''Ubuntu Linux OS''' version 14.10. | |
|- | |- | ||
|00:34 | |00:34 | ||
| To follow this tutorial, you should be familiar with: | | To follow this tutorial, you should be familiar with: | ||
| − | + | Basic Physics and | |
| − | + | '''ExpEYES Junior''' interface. | |
| − | + | ||
If not, for relevant tutorials in '''ExpEYES''', please visit our website. | If not, for relevant tutorials in '''ExpEYES''', please visit our website. | ||
| Line 148: | Line 147: | ||
|- | |- | ||
|03:59 | |03:59 | ||
| − | |The values of '''XC, XL''' and '''phase angle ''' are displayed. '''XC''' and '''XL''' are ''' | + | |The values of '''XC, XL''' and '''phase angle ''' are displayed. '''XC''' and '''XL''' are '''impedences''' of '''capacitance''' and '''inductance'''. |
|- | |- | ||
| Line 200: | Line 199: | ||
|05:53 | |05:53 | ||
| Change the value of: | | Change the value of: | ||
| + | '''Frequency''' to '''149.4Hz(hertz)''' | ||
| − | + | '''Resistance''' to''' 1360 Ohm''' | |
| − | + | '''Capactance''' to '''0 uF(micro farad)''' and | |
| − | + | '''inductance''' to '''78 mH (milli henry)'''. | |
| − | + | ||
| − | + | ||
|- | |- | ||
| Line 284: | Line 282: | ||
|Change the value of: | |Change the value of: | ||
| − | + | frequency to '''149.4Hz ''' and | |
| − | + | inductance to '''78mH (milli Henry)'''. | |
|- | |- | ||
| Line 312: | Line 310: | ||
|In this tutorial, we have studied- | |In this tutorial, we have studied- | ||
| − | + | AC phase shift in '''RC, RL''' and '''LCR''' circuits and Calculated the phase shift values. | |
| − | + | ||
| − | + | ||
|- | |- | ||
| Line 335: | Line 331: | ||
|- | |- | ||
| 10:06 | | 10:06 | ||
| − | | This tutorial is contributed by Kaushik Datta and Madhuri Ganapathi. | + | | This tutorial is contributed by Kaushik Datta and Madhuri Ganapathi.Thank you for joining. |
| − | Thank you for joining. | + | |
|} | |} | ||
Latest revision as of 18:03, 20 February 2017
| Time | Narration |
| 00:01 | Hello everyone. Welcome to this tutorial on Steady State Response of Circuits. |
| 00:07 | In this tutorial, we will study:
AC phase shift in RC, RL and LCR circuits. Calculate Phase shift values and Show circuit diagrams for our experiments. |
| 00:24 | Here, I am using:
ExpEYES version 3.1.0 Ubuntu Linux OS version 14.10. |
| 00:34 | To follow this tutorial, you should be familiar with:
Basic Physics and ExpEYES Junior interface. If not, for relevant tutorials in ExpEYES, please visit our website. |
| 00:50 | Let's first define Steady state response of a circuit. |
| 00:55 | Steady state response is a period of observance when a circuit is in equilibrium condition. |
| 01:02 | Now, we will define phase shift. Phase shift is a relative change in the phase of a waveform. |
| 01:10 | Let us now study AC phase shift in RC circuit. |
| 01:14 | In this experiment, we will measure voltage variation and phase shift in the circuit. |
| 01:20 | To perform this experiment,
A1 is connected to SINE. 1uF(one micro farad) capacitor is connected between SINE and A2. 1K resistor is connected between A2 and ground (GND). |
| 01:36 | This is the circuit diagram. |
| 01:40 | Let's see the result on the Plot window. |
| 01:44 | On the Plot window, click on A1 and drag to CH1.
A1 is assigned to CH1. |
| 01:54 | Click on A2 and drag to CH2.
A2 is assigned to CH2. |
| 02:02 | Move the mSec/div slider to obtain the Sine waves. |
| 02:08 | Click on EXPERIMENTS button. Select Study of AC circuits. |
| 02:14 | Study of AC Circuits and Schematic windows open. Schematic window shows the circuit diagram. |
| 02:24 | Study of AC Circuits window displays three traces with different voltages. |
| 02:30 | Black trace is applied voltage at A1. |
| 02:35 | Red trace is the voltage across the resistor. |
| 02:39 | Blue trace is the voltage across the capacitor. |
| 02:44 | On the right side of the window, we can see Phasor plot. |
| 02:49 | On the plot, positive X-axis represents voltage across resistor. |
| 02:56 | Positive Y-axis represents voltage across inductor. |
| 03:02 | Negative Y-axis represents voltage across capacitor. |
| 03:08 | Frequency of the waves is 149.4Hz.
Total voltage at A1 is 3.54V. Voltage across R at A2 is 2.50V. Voltage at A1-A2 is 2.43V. Phase Shift is 43.1 deg(degree). |
| 03:34 | Calculator shows default values of frequency, resistance, capacitance and inductance. |
| 03:44 | Change the frequency value to 149.4Hz and Inductor value to 0 mH (zero milli henry). |
| 03:53 | Click on Calculate XL, XC and Angle button. |
| 03:59 | The values of XC, XL and phase angle are displayed. XC and XL are impedences of capacitance and inductance. |
| 04:11 | Dphi is phase shift. Calculated Phase shift is 46.8 degrees. |
| 04:20 | Let us calculate phase shift value using the formula: Φ (Phase shift) = arctan(XC/XR), where XC=1/2πfC.
Here f is frequency in hertz, C is capacitance in farads. Calculated value of phase shift is 46.81 deg. |
| 04:48 | Now, we will study AC phase shift in RL circuit. |
| 04:52 | In this experiment, we will measure phase shift when capacitor is replaced by an inductor. |
| 04:59 | To perform this experiment, A1 is connected to SINE.
A 3000 turns coil is connected between SINE and A2. |
| 05:11 | 560 Ohm resistor is connected between A2 and GND. This is the circuit diagram. |
| 05:20 | Let's see the result on the Plot window. |
| 05:24 | Two sine waves are generated. |
| 05:27 | Click on EXPERIMENTS button, select Study of AC circuits. Study of AC Circuits window opens. |
| 05:38 | On the right side of the window, we can see Phasor plot. |
| 05:43 | You can see that Phase Shift is -2.7 deg (minus 2.7 degree). Notice the values of frequency and voltages. |
| 05:53 | Change the value of:
Frequency to 149.4Hz(hertz) Resistance to 1360 Ohm Capactance to 0 uF(micro farad) and inductance to 78 mH (milli henry). |
| 06:11 | Click on Calculate XL, XC and Angle button to view the values. Calculated phase shift is -3.1 deg(minus 3.1 degree). |
| 06:23 | Let us calculate phase shift value using the formula. |
| 06:27 | Phase shift (Φ) = arctan(XL/XR), where XL=2πfL. Here L is inductance. |
| 06:41 | External resistance value is 560 Ohm and resistance of the coil is 800 Ohm. Total resistance =( 560 Ohm + 800 Ohm)= 1360 Ohm.
Calculated value of the phase shift is 3.08degrees. |
| 07:05 | Now, we will study AC phase shift in LCR circuit. |
| 07:10 | We will measure phase shift when inductor & capacitor are connected in the circuit. |
| 07:17 | To perform this experiment, SINE is connected to A1. |
| 07:21 | Coil and 1 uF(1 micro farad) capacitor are connected between A1 and A2. |
| 07:28 | 1K resistor is connected between A2 and ground (GND). This is the circuit diagram. |
| 07:36 | Let's see the result on the Plot window. |
| 07:39 | Two sine waves are generated with a phase shift. |
| 07:43 | Click on EXPERIMENTS button, select Study of AC Circuits. |
| 07:50 | Study of AC Circuits and Schematic windows open. Schematic window shows the circuit diagram. |
| 07:59 | Study of AC Circuits window displays three sine waves with different voltages. |
| 08:06 | On right side of the window, we can see Phasor plot. |
| 08:11 | Frequency of the waves is 149.4Hz,
Total voltage at A1 is 3.53V, Voltage across R at A2 is 2.50V, Voltage of LC across A1-A2 is 2.42V. |
| 08:33 | Phase Shift is 43.1 deg(degree). |
| 08:37 | Change the value of:
frequency to 149.4Hz and inductance to 78mH (milli Henry). |
| 08:48 | Click on Calculate XL, XC and Angle button to view the values. Calculated phase shift value is 44.8 deg. |
| 09:00 | Let us calculate Phase shift value using the formula. |
| 09:04 | Phase shift Φ = arctan(XC – XL/XR). |
| 09:10 | External resistance value is 1000 Ohm. Calculated value of the phase shift is 44.77 degrees. |
| 09:20 | Let us summarize. |
| 09:22 | In this tutorial, we have studied-
AC phase shift in RC, RL and LCR circuits and Calculated the phase shift values. |
| 09:33 | As an assignment,
study AC Phase shift of RL and LCR circuits, using different resistance & capacitance values. |
| 09:44 | This video summarizes the Spoken Tutorial project. If you do not have good bandwidth, you can download and watch it. |
| 09:52 | We conduct workshops using Spoken Tutorials and give certificates. Please contact us. |
| 09:59 | The Spoken Tutorial Project is funded by NMEICT, MHRD, Government of India. |
| 10:06 | This tutorial is contributed by Kaushik Datta and Madhuri Ganapathi.Thank you for joining. |
