Difference between revisions of "Inkscape/C3/Create-patterns-in-Inkscape/English"

From Script | Spoken-Tutorial
Jump to: navigation, search
 
(7 intermediate revisions by 2 users not shown)
Line 1: Line 1:
'''Title of script: Create patterns in Inkscape'''
 
 
'''Author:''' Arthi. A
 
 
'''Keywords:''' Create patters in Inkscape
 
 
 
  
 
{| style="border-spacing:0;"
 
{| style="border-spacing:0;"
| style="border-top:0.05pt solid #000000;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| <center>Visual cue</center>
+
| style="border-top:0.05pt solid #000000;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0.0382in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| <center>Visual cue</center>
| style="border:0.05pt solid #000000;padding:0.097cm;"| <center>Narration</center>
+
| style="border:0.05pt solid #000000;padding:0.0382in;"| <center>Narration</center>
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Opening Slide
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Opening Slide  
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Welcome to the Spoken Tutorial on “'''Create patterns in Inkscape'''” using '''Inkscape'''.
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Welcome to the Spoken Tutorial on “'''Create patterns in Inkscape'''” using '''Inkscape'''.  
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Learning Objectives (Slide)
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Learning Objectives (Slide)  
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| In this tutorial
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| In this tutorial  
  
 +
We will learn to create patterns using
 +
* '''Cloning'''
 +
* '''Pattern along path'''
 +
* '''Spray''' tool
 +
* '''Path effect editor'''
  
We will learn to create patterns using
+
|-
 +
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| System requirement (Slide)
 +
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| To record this tutorial, I am using  
 +
* '''Ubuntu Linux''' 12.04 OS
 +
* '''Inkscape''' version 0.48.4
  
* Cloning
+
|-
* Pattern along path
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Open '''Inkscape'''
* Spray tool
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Let us open '''Inkscape.'''
* Path effect editor
+
  
 +
|-
 +
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Click on '''Star tool''' >> Draw a '''star'''
 +
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Click on the '''Star tool''' and draw a star in the '''canvas.'''
  
We will also learn to align nodes.
+
|-
 +
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Click on '''Selector tool'''
 +
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Now click on the '''Selector tool.'''
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| System requirement (Slide)
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Change width and height to 40
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| To record this tutorial, I am using
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| On the '''Tools controls bar:'''
  
  
* '''Ubuntu Linux''' 12.04 OS
+
Change the '''width''' and '''height''' parameters to 40.
* '''Inkscape''' version 0.48.4
+
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Open '''Inkscape'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Zoom in >> Click on the star once
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Let us open''' Inkscape.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Zoom in and click on the star once.
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on '''Star tool''' >> Draw a '''star''' 
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"|  
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on the '''Star tool''' and draw a star in the draw area.
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Observe that the '''pivot point''' is visible now.  
  
|-
+
Its the '''plus shape''' in the centre of the star object.  
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on '''Selector tool'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Now click on the '''Selector tool.'''
+
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Change width and height to 40
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Move the '''pivot point'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Change the '''Width''' and '''Height''' parameters to 40.
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Click and move the '''pivot point''' far away from the star;
 +
 
 +
as demonstrated here.  
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Go to '''Edit''' >> '''Clone''' >> '''Create Tiled clones'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Go to '''Edit''' >> '''Clone''' >> '''Create Tiled clones'''  
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now, go to '''Edit''' menu, click on '''Clone''' and then on '''Create Tiled clones.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Now, go to '''Edit''' menu, click on '''Clone''' and then on '''Create Tiled clones.'''  
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Point to the dialog box
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Point to the dialog box  
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| A new dialog box opens up.
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| A new dialog box opens up.
 
+
  
 
You can find many tabs and many options under each tab.
 
You can find many tabs and many options under each tab.
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on '''symmetry tab '''>> drop-down menu >> option '''simple translation'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Click on '''symmetry tab '''>> drop-down menu >> option '''simple translation'''  
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Under '''Symmetry''' tab, we can see a drop-down menu with various methods.  
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Under '''Symmetry''' tab, we can see a drop-down menu with various methods.  
 
+
  
For this demo, we will keep the option '''simple translation.'''
+
For this demo, we will keep the option '''simple translation.'''  
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Change''' rows '''and '''columns '''to '''1 '''and''' 40'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Change '''rows '''and '''columns '''to '''1 '''and '''40'''  
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Change the rows and columns parameters to 1 and 40 respectively.
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Change the rows and columns parameters to 1 and 40 respectively.
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Shift '''tab >>''' '''Change''' X parameter '''to '''-100'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| '''Shift '''tab >> Change '''X parameter '''to '''-100'''  
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Next go to '''Shift tab.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Next go to '''Shift tab.'''  
  
 +
Change the
 +
*percentage of '''Shift X''' parameter
 +
*under '''Per column''' to -100,
  
Change the percentage of '''Shift X''' parameter under '''Per column''' to -100, as shown here.
+
as shown here.
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Go to '''Rotation''' tab >> Change angle to 10
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Go to '''Rotation''' tab >> Change angle to 10  
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Next, let us go to '''Rotation''' tab.
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Next, let us go to '''Rotation''' tab.  
  
 
+
Change the '''Angle''' under '''Per column''' to 10.  
Change the '''Angle''' under '''Per column''' to 10.
+
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on '''Create '''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Click on '''Create '''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now click on '''Create''' button.
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Now click on '''Create''' button.  
  
 
+
Observe, a circle pattern is formed with the star.  
Observe, a circle pattern is formed with the star.
+
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Point to all the stars
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Point to the patterns
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Any change made on the original star, will be reflected in all the other stars.
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Likewise, you can
 +
*use the other options under '''Create Tiled clones '''
 +
*to make many beautiful patterns.  
  
|-
+
Let us move this star circle aside.  
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select and scale the original star
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Let me scale the original star.
+
  
Observe all the stars are getting scaled, automatically.
+
<nowiki><<PAUSE>> </nowiki>
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Point to the patterns
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Point to the patterns  
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| You can use the other options under '''Create Tiled clones '''to make beautiful patterns.  
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Next, we will learn how to create a pattern along a path.  
  
 +
|-
 +
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Draw a rounded rectangle >> '''Selector tool.'''
 +
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Select '''Rectangle tool '''and draw a '''rounded rectangle.'''
  
Let us keep this star circle aside.
+
Color it green.  
 
+
  
<nowiki><<PAUSE>></nowiki>
+
Then click on the '''Selector tool.'''
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Point to the patterns
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Change the width to 540 and height 250
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Next, we will learn how to create a pattern along a path.
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| On the '''Tool controls bar,''' change the '''Width''' to 540 and '''Height '''to 250.  
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Draw a rounded rectangle
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Draw a star >> Click on the '''Selector tool'''  
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Select '''Rectangle tool '''and draw a '''rounded rectangle.'''  
+
  
Color it green.
+
'''Width''' and '''Height''' to 50 x 50
 +
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Next, draw a star pattern using the '''Star tool'''.  
  
 +
Click on the '''Selector tool.'''
  
Then click on the '''Selector tool.'''
+
On the '''Tool controls bar '''change the '''Width''' and '''Height''' to 50.
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Change the width to 540 and height 250
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Place in on the top left of the rectangle
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| On the '''Tool controls bar''' change the '''Width''' to 540 and '''Height '''to 250.
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Place it on the top left border of the rectangle.  
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Draw a star >> '''Width''' and '''Height''' to 100 x 100
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Select both shapes >> '''Extension menu '''>> '''Generate from path '''>> '''Pattern along Path'''  
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Next draw a pattern using the '''Star tool. '''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Select both the shapes. Go to '''Extensions''' menu.
  
 
+
Click on '''Generate from path''' and then on '''Pattern along Path.'''  
Change the '''Width''' and '''Height''' to 100 x 100.
+
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Place in on the top left of the rectangle
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Change the '''Copies of the patterns '''option to '''Repeated '''and the '''Deformation type '''option to '''Ribbon.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Place it on the top left of the rectangle.
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Change the  
 +
*'''Copies of the patterns '''option to '''Repeated '''
 +
*and the '''Deformation type '''option to '''Ribbon.'''
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select both shapes >> '''Extension menu '''>>''' Generate from path '''>>''' Pattern along Path'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Click on '''Apply''' >> '''Close'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Select both the shapes. Go to '''Extension''' menu.
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Click on '''Apply '''button and '''Close''' button.  
  
 +
Observe, a beautiful pattern is formed around border of the rectangle.
  
Click on '''Generate from path''' and then on '''Pattern along Path.'''
+
<nowiki><<PAUSE>> </nowiki>
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|  
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Point to the '''canvas'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| If needed if you can change the parameters. Let me keep as it is.  
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Let us now create another pattern using '''Path effects.'''
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on '''Apply'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Select '''Bezier tool >> '''Draw a wavy path
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on '''Apply. '''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Select '''Bezier tool''' and draw a wavy path.  
 
+
 
+
Observe a beautiful pattern is formed around the rectangle.  
+
 
+
 
+
<nowiki><<PAUSE>></nowiki>
+
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Point to the '''canvas'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Go to '''Path menu >> '''Click on '''Path effects.'''  
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Next we will create another pattern using '''Path effects.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Go to '''Path menu.''' Click on '''Path Effects Editor.'''  
 
+
|-
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select '''Bezier tool >> '''Draw a wavy path
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Select '''Bezier tool.''' Draw a wavy path.
+
 
+
|-
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Go to '''Path menu >> '''Click on '''Path effects.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Go to '''Path menu.''' Click on '''Path Effects Editor.'''
+
 
+
  
 
A dialog box opens up.  
 
A dialog box opens up.  
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on '''Apply new effect'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Click on '''Apply new effect'''  
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on '''Apply new effect''' drop down menu.  
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Click on '''Apply new effect''' drop down menu.  
  
Observe there are various effects available.  
+
Notice, there are various effects listed here.  
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select '''Spiro spline'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Select '''Spiro spline'''  
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Let me select '''Spiro spline.''' Click on '''Add.'''  
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Let me select '''Gears''' and then click on '''Add.'''  
  
 
+
Observe the change in the shape.
Observe Spiro effect is added to the shape.
+
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select '''Sketch''' >> '''Add'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Select '''Sketch''' >> '''Add'''  
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Next select '''Sketch''' and click on '''Add.''' Observe the effect.
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Next, select '''Sketch''' and click on '''Add''' button.  
  
|-
+
Observe the effect.
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Point to '''Tool options'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Below you can find '''Tool options''' to edit.  
+
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select the shape and keep it aside
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Point to '''Tool options'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Select both the shape and keep it aside.
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| In the '''Path Effect Editor''':
  
 
+
You can find various parameters related to the current effect.
<nowiki><<PAUSE>></nowiki>
+
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Point to '''Spray tool'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Change Strokes = 10.
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Next we will learn to create a tree pattern using '''Spray tool.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Let us change one of them, say, '''Strokes'''.
  
|-
+
Let's change it to 10 and press '''Enter'''.  
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select '''Bezier tool >> '''draw trunk >> draw leaf
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Select '''Bezier tool.''' Draw a trunk. Color it brown.
+
  
 
+
Observe the change on the object.  
Now draw a leaf. Color it green.
+
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select '''Spray tool >> '''Create pattern
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Close the '''Path Effect Editor''' dialog box.
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Select '''Spray tool.''' Click on Leaf.
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Now close the '''Path Effect Editor''' dialog box.  
 
+
 
+
Now without releasing the mouse drag around the trunk to create a tree.
+
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Point to the tree
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Select the shape and keep it aside
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Observe a tree shape is formed. Now select it and keep it aside.
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Select all the shapes and move it to one side.  
  
|-
+
<nowiki><<PAUSE>> </nowiki>
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Lastly we will learn how to align nodes using '''Align and Distribute.'''
+
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on '''Bezier tool >> '''Draw zig zag lines
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Point to '''Spray tool'''  
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on '''Bezier tool.''' Draw lines up and down in a zig zag way.
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Next, we will learn to create a tree pattern using '''Spray tool.'''  
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Go to '''Object menu '''>> '''Align and Distribute'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Select '''Bezier tool >> '''draw trunk >> draw leaf
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Go to '''Object menu.''' Click on '''Align and Distribute.'''
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Select '''Bezier tool.'''  
  
|-
+
Draw a tree-trunk, as demonstrated and color it brown.  
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on '''Nodes tool '''>>''' '''Select all >> Click on first option
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on '''Nodes tool.''' Select all the top nodes.
+
  
Under the '''Nodes''' tab click on the first option.  
+
Now draw a leaf and color it green.  
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Point to nodes
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Select '''Spray tool >> '''Create pattern
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Observe the selected nodes are aligned horizontally.
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Select '''Spray tool''' and click on the leaf shape.  
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select the first top node and the first end node
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| without releasing the mouse drag around the trunk
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| In a similar way do for the bottom nodes.
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Now without releasing the mouse drag around the trunk to create a tree.  
 
+
Next select the first top node and the first end node.  
+
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on the second option
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Point to the tree
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now click on the second option under '''nodes''' tab.
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Observe a tree shape is formed.  
 
+
 
+
Observe the nodes are aligned vertically.
+
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select all the nodes >> Click on the third option
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Summarize
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now, select all the nodes. Click on the third option.
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| That's all for this tutorial. Let us summarize.
 
+
|-
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Point to nodes
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| The space between the nodes are distributed horizontally.
+
 
+
|-
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on the last option
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Next click on the last option.
+
 
+
 
+
This aligns the space vertically. We can use this this option is used for drawing graphs.
+
 
+
|-
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Summarize
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Let us summarize
+
 
+
 
+
We will learnt create patterns using
+
  
* Cloning
+
In this tutorial, we have learnt to create patterns using
* Pattern along path
+
* '''Cloning'''
* Spray tool
+
* '''Pattern along path'''
* Path effect editor<br/> We also learnt to learnt to Align nodes
+
* '''Spray''' tool  
 +
* and '''Path effect editor'''.
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Assignment
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Assignment  
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Create a round and colourful pattern.
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| As an assignment, create a round and colourful pattern.  
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Completed assignment  
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Completed assignment  
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Your completed assignment should look like this.
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Your completed assignment should look like this.  
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| About Slide  
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| About Slide  
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| The video available at the following link summarizes the Spoken Tutorial project. Please watch it.  
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| The video available at the following link summarizes the Spoken Tutorial project. Please watch it.  
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| About Slide  
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| About Slide  
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| The Spoken Tutorial Project Team conducts workshops and gives certificates for those who pass an online test.  
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| The Spoken Tutorial Project Team conducts workshops and gives certificates for those who pass an online test.  
  
 
For more details, please write to us.  
 
For more details, please write to us.  
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| About Slide  
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| About Slide  
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Spoken Tutorial Project is supported by the NMEICT, MHRD, Government of India.  
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| Spoken Tutorial Project is supported by the NMEICT, MHRD, Government of India.  
  
 
More information on this Mission is available at this link.  
 
More information on this Mission is available at this link.  
  
 
|-
 
|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Acknowledgment  
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0in;"| Acknowledgment  
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| We have come to the end of this tutorial.  
+
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding-top:0in;padding-bottom:0.0382in;padding-left:0.0382in;padding-right:0.0382in;"| We have come to the end of this tutorial.  
  
This is Arthi and Saurabh from IIT Bombay, signing off. Thanks for joining.
+
This is Arthi and Saurabh from IIT Bombay, signing off. Thanks for joining.  
  
 
|}
 
|}

Latest revision as of 10:56, 29 June 2015

Visual cue
Narration
Opening Slide Welcome to the Spoken Tutorial on “Create patterns in Inkscape” using Inkscape.
Learning Objectives (Slide) In this tutorial

We will learn to create patterns using

  • Cloning
  • Pattern along path
  • Spray tool
  • Path effect editor
System requirement (Slide) To record this tutorial, I am using
  • Ubuntu Linux 12.04 OS
  • Inkscape version 0.48.4
Open Inkscape Let us open Inkscape.
Click on Star tool >> Draw a star Click on the Star tool and draw a star in the canvas.
Click on Selector tool Now click on the Selector tool.
Change width and height to 40 On the Tools controls bar:


Change the width and height parameters to 40.

Zoom in >> Click on the star once Zoom in and click on the star once.
Observe that the pivot point is visible now.

Its the plus shape in the centre of the star object.

Move the pivot point Click and move the pivot point far away from the star;

as demonstrated here.

Go to Edit >> Clone >> Create Tiled clones Now, go to Edit menu, click on Clone and then on Create Tiled clones.
Point to the dialog box A new dialog box opens up.

You can find many tabs and many options under each tab.

Click on symmetry tab >> drop-down menu >> option simple translation Under Symmetry tab, we can see a drop-down menu with various methods.

For this demo, we will keep the option simple translation.

Change rows and columns to 1 and 40 Change the rows and columns parameters to 1 and 40 respectively.
Shift tab >> Change X parameter to -100 Next go to Shift tab.

Change the

  • percentage of Shift X parameter
  • under Per column to -100,

as shown here.

Go to Rotation tab >> Change angle to 10 Next, let us go to Rotation tab.

Change the Angle under Per column to 10.

Click on Create Now click on Create button.

Observe, a circle pattern is formed with the star.

Point to the patterns Likewise, you can
  • use the other options under Create Tiled clones
  • to make many beautiful patterns.

Let us move this star circle aside.

<<PAUSE>>

Point to the patterns Next, we will learn how to create a pattern along a path.
Draw a rounded rectangle >> Selector tool. Select Rectangle tool and draw a rounded rectangle.

Color it green.

Then click on the Selector tool.

Change the width to 540 and height 250 On the Tool controls bar, change the Width to 540 and Height to 250.
Draw a star >> Click on the Selector tool

Width and Height to 50 x 50

Next, draw a star pattern using the Star tool.

Click on the Selector tool.

On the Tool controls bar change the Width and Height to 50.

Place in on the top left of the rectangle Place it on the top left border of the rectangle.
Select both shapes >> Extension menu >> Generate from path >> Pattern along Path Select both the shapes. Go to Extensions menu.

Click on Generate from path and then on Pattern along Path.

Change the Copies of the patterns option to Repeated and the Deformation type option to Ribbon. Change the
  • Copies of the patterns option to Repeated
  • and the Deformation type option to Ribbon.
Click on Apply >> Close Click on Apply button and Close button.

Observe, a beautiful pattern is formed around border of the rectangle.

<<PAUSE>>

Point to the canvas Let us now create another pattern using Path effects.
Select Bezier tool >> Draw a wavy path Select Bezier tool and draw a wavy path.
Go to Path menu >> Click on Path effects. Go to Path menu. Click on Path Effects Editor.

A dialog box opens up.

Click on Apply new effect Click on Apply new effect drop down menu.

Notice, there are various effects listed here.

Select Spiro spline Let me select Gears and then click on Add.

Observe the change in the shape.

Select Sketch >> Add Next, select Sketch and click on Add button.

Observe the effect.

Point to Tool options In the Path Effect Editor:

You can find various parameters related to the current effect.

Change Strokes = 10. Let us change one of them, say, Strokes.

Let's change it to 10 and press Enter.

Observe the change on the object.

Close the Path Effect Editor dialog box. Now close the Path Effect Editor dialog box.
Select the shape and keep it aside Select all the shapes and move it to one side.

<<PAUSE>>

Point to Spray tool Next, we will learn to create a tree pattern using Spray tool.
Select Bezier tool >> draw trunk >> draw leaf Select Bezier tool.

Draw a tree-trunk, as demonstrated and color it brown.

Now draw a leaf and color it green.

Select Spray tool >> Create pattern Select Spray tool and click on the leaf shape.
without releasing the mouse drag around the trunk Now without releasing the mouse drag around the trunk to create a tree.
Point to the tree Observe a tree shape is formed.
Summarize That's all for this tutorial. Let us summarize.

In this tutorial, we have learnt to create patterns using

  • Cloning
  • Pattern along path
  • Spray tool
  • and Path effect editor.
Assignment As an assignment, create a round and colourful pattern.
Completed assignment Your completed assignment should look like this.
About Slide The video available at the following link summarizes the Spoken Tutorial project. Please watch it.
About Slide The Spoken Tutorial Project Team conducts workshops and gives certificates for those who pass an online test.

For more details, please write to us.

About Slide Spoken Tutorial Project is supported by the NMEICT, MHRD, Government of India.

More information on this Mission is available at this link.

Acknowledgment We have come to the end of this tutorial.

This is Arthi and Saurabh from IIT Bombay, signing off. Thanks for joining.

Contributors and Content Editors

Arthi, Nancyvarkey