Difference between revisions of "Inkscape/C2/Create-and-edit-shapes/Gujarati"

From Script | Spoken-Tutorial
Jump to: navigation, search
(Created page with "{| Border =1 | Time | Narration |- | 00:00 | '''Inkscape.''' '''Inkscape.''' માં '''“Create and edit shapes” પરના સ્પોકન ટ્યુટોર...")
 
Line 34: Line 34:
 
|-
 
|-
 
| 00:34
 
| 00:34
−
| You can open '''Inkscape''' by double-clicking on the '''logo.'''
+
| તમે '''logo.''' પર બમણું ક્લિક-કરીને '''Inkscape''' ખોલી શકો છો.
  
 
|-
 
|-
 
| 00:38
 
| 00:38
−
|On the top of the interface, you will find the '''Menu bar '''and''' Tool controls bar.'''
+
| ઇન્ટરફેસના મથાળે, તમને '''Menu bar '''અને ''' Tool controls bar.''' મળશે.
  
 
|-
 
|-
 
| 00:44
 
| 00:44
−
| This is followed by '''rulers '''at the top and at the side.
+
| તેની બાદ  '''rulers ''' ટોચે બાજુમાં આવેલ છે.
  
 
|-
 
|-
 
| 00:48
 
| 00:48
−
|On the right side of the interface, you will find the '''Command bar''' and '''Snap controls bar.'''
+
|ઇન્ટરફેસની જમણી બાજુએ તમને  '''Command bar''' અને  '''Snap controls bar.''' જોઈ શકીએ છીએ.
  
 
|-
 
|-
 
| 00:54
 
| 00:54
−
|The '''Tool box '''is located on the left side of the interface.
+
|The '''Tool box ''' ઇન્ટરફેસની ડાબી બાજુએ આવેલ છે.
  
 
|-
 
|-
 
| 00:58
 
| 00:58
−
|In the centre, is the '''canvas'''. This is where you will draw your graphics.
+
| મધ્યમાં '''canvas''' છે જ્યાં તમે તમારા ચિત્રો દોરશો.
  
 
|-
 
|-
 
| 01:03
 
| 01:03
−
|At the bottom of the interface, we can see the '''color palette '''and the '''status bar.'''
+
| ઇન્ટરફેસની નીચેની બાજુએ આપણે  '''color palette '''અને  '''status bar.''' જોઈ શકીએ છીએ.
  
 
|-
 
|-
 
| 01:09
 
| 01:09
−
|Now, let us learn to create and edit some basic shapes in '''Inkscape'''.
+
|હવે ચાલો '''Inkscape''' માં કેટલાક સામાન્ય આકારો બનાવતા તથા એડિટ કરતા શીખીએ.
  
 
|-
 
|-

Revision as of 16:43, 15 April 2015

Time Narration
00:00 Inkscape. Inkscape. માં “Create and edit shapes” પરના સ્પોકન ટ્યુટોરીયલમાં તમારું સ્વાગત છે.


00:06 આ ટ્યુટોરીયલમાં આપણે Inkscape. થી પોતાને અનુકુળ બનાવીશું.
00:10 આપણે શીખીશું ઇન્સ્કેપ ઇન્ટરફેસ વિષે અને સદા આકારો બનાવવું.
00:16 રંગો ભરવું તથા handles ની મદદથી આકારોને સુધારિત કરવું.
00:20 આ ટ્યુટોરીયલ માટે, હું ઉપયોગ કરી રહી છું Ubuntu Linux 12.04 ઓએસ
00:25 Inkscape આવૃત્તિ 0.48.4
00:29 Dash home. પર જાઓ અને ટાઈપ કરો Inkscape.
00:34 તમે logo. પર બમણું ક્લિક-કરીને Inkscape ખોલી શકો છો.
00:38 ઇન્ટરફેસના મથાળે, તમને Menu bar અને Tool controls bar. મળશે.
00:44 તેની બાદ rulers ટોચે બાજુમાં આવેલ છે.
00:48 ઇન્ટરફેસની જમણી બાજુએ તમને Command bar અને Snap controls bar. જોઈ શકીએ છીએ.
00:54 The Tool box ઇન્ટરફેસની ડાબી બાજુએ આવેલ છે.
00:58 મધ્યમાં canvas છે જ્યાં તમે તમારા ચિત્રો દોરશો.
01:03 ઇન્ટરફેસની નીચેની બાજુએ આપણે color palette અને status bar. જોઈ શકીએ છીએ.
01:09 હવે ચાલો Inkscape માં કેટલાક સામાન્ય આકારો બનાવતા તથા એડિટ કરતા શીખીએ.
01:14 First of all, we will learn about Select and Transform tool. It is commonly called as Selector tool.
01:22 It's a very important tool. You will find it on the left hand side of the Tool box.
01:28 With this tool, you can select objects, transform and move them around on the canvas.
01:34 To open a new Inkscape document, click on File and then choose New and click on Default.
01:41 To open an existing Inkscape document, click on File and then choose Open.
01:47 Let's open the drawing_1.svg file that we created earlier.
01:53 I had saved in Documents folder. Click on Open button at the bottom right.
02:01 We created a rectangle earlier.
02:04 Now, click on the rectangle.
02:06 By default, the color of the rectangle is green.
02:09 To change the color to red, we will use the color palette at the bottom.
02:14 So, I will move the cursor to the bottom and click on red color.
02:18 Observe the color change in the rectangle.
02:22 Let us now move the rectangle.
02:23 To do so, you should click anywhere on the rectangle.
02:27 Now, without releasing the mouse button, drag it wherever you want on the canvas.
02:33 Then release the mouse button.
02:37 Let us zoom in for a better view. To do so, press ctrl key and use the scroll button on the mouse
02:46 Notice arrows around the rectangle. These are called handles, which we can use for scaling and rotating.
02:57 When the cursor is kept on any of the handles, the color of the handle changes.
03:02 This indicates that particular handle is selected and ready for resizing.
03:08 To scale or resize the rectangle, click and drag on any one of the corner handles.
03:17 If you want to keep the aspect ratio same, hold the ctrl key while resizing.
03:24 To change the length or the width of the rectangle, use one of the handles on the sides of the rectangle.
03:32 Click and drag the handle, either to the left or to the right.
03:39 Observe the change in the width of the rectangle.
03:43 Now let's change the height of the rectangle.
03:46 So, we will click and drag on either the top or the bottom handle.
03:51 Observe the change in the height of the rectangle.
03:54 We can also change the width and height of the rectangle manually, by changing the width and height parameters on the Tool controls bar.
04:03 I will change the width to 400 and height to 200.
04:07 Notice the change in the size of the rectangle.
04:10 In a similar way, you can also move the object by changing the X and Y axes positions.
04:19 Now, let's learn how to rotate the rectangle.
04:24 To do so, click on the rectangle once again.
04:27 Notice that now, the shape of the corner handles has changed, to indicate that it is ready for rotation.
04:34 I will click on the top right corner handle and rotate the rectangle.
04:44 You can also skew the rectangle by clicking and dragging any of the side handles.
04:50 I am clicking the left middle handle and dragging it up and down to skew the rectangle.
04:56 Observe the changes as I do so.
04:59 We will learn some more details on using these handles in another tutorial.
05:04 Let us unselect this shape now.
05:06 To do so, click anywhere in the canvas area or outside the canvas boundary.
05:11 Let me move the mouse back to the Tool box and over the same rectangle tool.
05:17 The tool tip says that we can draw rectangles and squares using this tool.
05:22 So, first let me click on this tool.
05:25 To draw a square, simply hold the ctrl key and drag on the canvas.


05:30 Let me change its color to pink.
05:32 An assignment for you.
05:34 Select the Create circles and ellipses tool from the Tool box.
05:38 Use the ctrl key, draw a circle on the canvas.
05:42 Color it blue.
05:44 This is my circle.
05:46 Now let us learn how to modify this circle.
05:49 You can change the start and the end parameters to alter the shape of the circle to an arc or a segment.
05:56 There are 3 options here on the Tool controls bar, which helps to switch between the shapes.
06:03 Let me change the Start parameter to 100 and End parameter to -50.
06:09 We see that the circle shape has now changed to a segment shape.
06:14 Now I will click on arc icon and we see the change in the shape.
06:19 We can change back to circle shape again, by clicking on the circle icon.
06:25 Now, let's take a closer look at the circle shape on our canvas.
06:30 Notice 2 square handles and 2 circular handles called arc handles, on the shape.
06:37 The 2 square handles can be used to alter the shape of the circle to an ellipse shape.
06:44 Just drag these handles in the up-down or left-right directions.
06:53 Observe the change in the shape.
06:56 The 2 arc handles overlap each other. Click on the arc handle and move it anti-clockwise.
07:04 We can now see both the arc handles.
07:08 We can modify the circle shape into arc or segment shape using these arc handles.
07:14 Just by moving them in clockwise or anti-clockwise directions and observe the change in the shape.
07:24 Now, we will click on the rectangle tool in the Tool box and then click on the square.
07:30 Notice 2 resize handles and 2 arc handles on the top right corner of the shape.
07:40 As before, the 2 arc handles overlap each other.
07:43 Click on one of the arc handle and move it clockwise.
07:48 Now, we can see both the arc handles.
07:51 We can give rounded edges to the square using these handles.
07:56 Move them in clockwise or anti-clockwise directions and observe the change in the shape.
08:02 Now, let us create a polygon by clicking on the Stars and polygons tool from the Tool box.
08:08 This is right below the circle tool. So, click on it.
08:13 We will draw a polygon in a similar way and change the color to green.
08:20 By default, a 5-sided polygon i.e. a pentagon, is drawn.
08:24 Look at the Tool controls bar. Here, it says the number of corners of the polygon is 5.
08:32 You can create a square by decreasing the number to 4 and a triangle by decreasing it to 3.
08:39 By increasing it, we can create a pentagon, hexagon and so on.
08:44 Notice a resize handle on the polygon.
08:47 We can use it to resize or rotate the polygon.
08:52 Convert this shape into a star shape, by clicking on the star icon next to polygon icon, in the Tool controls bar.
09:00 Notice 2 handles on the star shape – one at the tip and one at the joint.
09:06 Click and drag the handle at the tip of the star to resize or rotate it.
09:12 We can resize and skew the shape of the star using the other handle.
09:17 Click on it and move in clockwise or anti-clockwise directions and observe the change in the shape and size.
09:25 We have come to the end of this tutorial. Let us summarize.
09:30 In this tutorial we learnt about Inkscape interface.
09:34 We also learnt to Create basic shapes like rectangle, square, circle, ellipse, polygon and star.
09:42 Fill color into the shapes and Modify the shapes using handles
09:46 Here is an assignment for you
09:49 Create a rectangle shape filled with blue color,
09:52 a circle shape with red color,
09:54 a star with 7 sides in green color.
09:58 Your completed assignment should look like this.
10:03 Watch the video available at the following link, It summarizes the Spoken Tutorial project.
10:09 If you do not have good bandwidth you can download and watch it.
10:13 The Spoken Tutorial Project Team conducts workshops using spoken tutorial and gives certificates for those who pass an online test.
10:22 For more details, please write to contact@spoken-tutorial.org
10:28 Spoken tutorial Project is a part of the Talk to a Teacher project
10:32 It is supported by the NMEICT, MHRD, Government of India.
10:38 More information on this Mission is available at http://spoken-tutorial.org/NMEICT-Intro
10:47 We have come to the end of this tutorial.
10:50 This is Arthi and Saurabh from IIT Bombay, signing off.


Thanks for joining.

Contributors and Content Editors

Jyotisolanki, PoojaMoolya

Retrieved from "https://script.spoken-tutorial.org/index.php?title=Inkscape/C2/Create-and-edit-shapes/Gujarati&oldid=21426"