Difference between revisions of "BOSS-Linux/C2/File-System/English"

From Script | Spoken-Tutorial
Jump to: navigation, search
(Created page with "Pending")
 
Line 1: Line 1:
−
Pending
+
'''Title of script''': '''The Linux File System'''
 +
 
 +
'''Author : Anirban Roy Choudhury'''
 +
 
 +
'''Keywords: Files, directories, make directory, remove directory, copy directory'''
 +
 
 +
Resources for the tutorial: [[File:Resources_for_file_system.zip]]
 +
 
 +
 
 +
{| style="border-spacing:0;"
 +
| style="border-top:0.035cm solid #000000;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Visual Cue'''</center>
 +
| style="border:0.035cm solid #000000;padding:0.097cm;"| <center>'''Narration'''
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| Display slide 1
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Welcome to this spoken tutorial on Linux File System.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| Display Slide 2
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| I am using Linux operating system. We assume that you know how to get started with the Linux operating system and have some basic idea about commands. If you are interested, it is available through another spoken tutorial, on the following website [http://spoken-tutorial.org/ http://spoken-tutorial.org].
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"|
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Also note that linux is case sensitive. All the commands used in this tutorial are in lower case unless otherwise mentioned.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| Display Slide 3
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| In Linux almost everything is a file. So what is a file? In real life we know that a file is where we store our documents and papers. Similarly in Linux a file is a container for storing information.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| Display Slide 4
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Next what is a directory? A directory can be understood as a collection of files and other (sub)directories.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"|
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| A directory helps us in organising our files in a systematic manner. This is like what we call folders in Windows. It allows different users to have there own directories with their files which others cannot access or modify.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"|
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Also if there are no directories, all the files on the system need to have unique names,which would be very difficult to maintain.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"|
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Though these definitions of files and directories are good to get a general feel about them, they are not entirely accurate.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| Display Slide 5
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| As well as its contents, a file has a name and some properties, or “administrative information”; that is, the file’s creation/modification date and its permissions.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"|
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| The properties are stored in the file’s inode, a special block of data in the file system that also contains the length of the file and where on the disk it’s stored.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"|
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| The system uses the number of the file’s inode; the directory structure just names the file for our benefit as its easier for us to remember names than large numbers.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"|
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Contrary to its oversimplified definition, a directory doesnot actually store other files ,it is itself a file that holds the inode numbers and names of other files.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| Display Slide 6
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| In fact in Linux there are three kinds of files:
 +
 
 +
 
 +
1 Regular Files or Ordinary files: It contains only data , as a stream of characters.
 +
 
 +
 
 +
2 Directories: As we just saw in the previous slides.
 +
 
 +
 
 +
3 Device Files: All hardware devices and peripherals are represented as files in Linux. A CD, a Harddisk or even an usb stick, everything is a file in Linux. But why is this so? This helps to read and write these devices in a way similar to that for ordinary files.
 +
 
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| Display Slide 7
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| All files in Linux are related, in short all form a family much like we do. A directory containing say some files and subdirectories will have a parent – child relationship with each other. This gives rise to the Linux File System Tree.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"|
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| At the top is the root( denoted by a frontslash /). It contains all the other files and directories. This also helps in easy navigation from one file or directory to other, if we know the correct path. As we work with a Linux file system, it seems that we are moving along this tree. One command and there you are teleported from one place to other.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"|
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Sounds interesting!! Indeed it is. As we will see.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| Display Slide 8
 +
 
 +
(upto first bullet)
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| When we login into the Linux system we are by default in a home directory.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| Switch to the terminal
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Switch to the terminal.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| '''Type at the command prompt'''
 +
 
 +
'''"echo $HOME"'''
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"|  To see the home directory
 +
 
 +
Type at the command prompt
 +
 
 +
'''echo space dollar HOME''' in capital and press enter.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"|
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| This gives the pathname of our home directory.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| '''Display Slide 8'''
 +
 
 +
'''(Second bulleted point)'''
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| We can move around from one directory to other. But any time we can be in one directory and this directory is known as the current directory or working directory.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"|
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| The pwd command helps us to see the current directory. pwd stands for present working directory.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| '''Type at the command prompt'''
 +
 
 +
'''"pwd"'''
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Type at the command prompt
 +
 
 +
"pwd" and press enter. Now this is our present working directory.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| Display Slide 9
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| We have said that we can move from one directory to other. But how do we do so? We have the cd command for this purpose.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"|
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| You have to type the command cd followed by the pathname of the directory you want to move to.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| '''Type at the command prompt "pwd" '''
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Lets again see our current directory by typing pwd at the command prompt. Press enter. So, now we are placed in this directory.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| '''Type at the command prompt'''
 +
 
 +
'''"cd /usr"'''
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Now say we want to move to slash usr directory. So, type
 +
 
 +
"cd space slash usr" . Remember here slash in linux means front slash and press enter.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| '''Type at the command prompt "pwd" '''
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Now lets see our current directory. Type pwd and press enter.
 +
 
 +
Yes we have moved to slash usr directory.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| Display Slide 8(modify the directory names according to your system)
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| The problem here is the pathnames can be very long, this is because these are Absolute Pathnames that enlist the entire path staring from the root directory.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"|
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Instead we may use Relative pathnames that begin from the current directory. Here we need to know two special characters.
 +
 
 +
 
 +
'''dot''' that represent the current directory and '''dot dot''' that represent the parent directory of the current directory.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| (change the portion 'anirban' in the narration according to your computer)
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Now let us have a brief session on cd command
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| '''Type at the command prompt'''
 +
 
 +
"cd"
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| The command cd without any argument is used to move back to the home directory. Type at the command prompt
 +
 
 +
"cd" and press enter.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| '''Type at the command prompt'''
 +
 
 +
"pwd"
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Now check our current directory by the pwd command.
 +
 
 +
So, now we are back in our home directory
 +
 
 +
/home/gnuhata [  slash home slash gnuhata ] </nowiki>
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| '''Type at the command prompt'''
 +
 
 +
"cd Music/"
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Now let us move to music directory. Type at the command prompt "cd space Music (M in capital) slash" and press enter
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| '''Type at the command prompt'''
 +
 
 +
"pwd"
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Now check our current directory by the pwd command. pwd and press enter.
 +
 
 +
See, we have moved /home/gnuhata/Music
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| '''Type at the command prompt'''
 +
 
 +
"cd .."
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Let us go to the parent directory of Music. For that you have to use cd command with dot dot. Type at the command prompt cd space dot dot and press enter.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| '''Type at the command prompt'''
 +
 
 +
"pwd"
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Now check our present directory by typing pwd. We are again in /home/gnuhata
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| '''Type at the command prompt'''
 +
 
 +
"cd ./Documents/"
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Now lets try to move to a subdirectory of the current directory using dot. Type at the command prompt cd space dot slash Documents(D in capital) slash. Press enter.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| '''Type at the command prompt'''
 +
 
 +
"pwd"
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Check our current directory by typing pwd. We are at /home/gnuhata/Documents
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| '''Type at the command prompt'''
 +
 
 +
"cd"
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Let me clear the screen by pressing control L. So you can see clearly.Go back to our home directory by cd command.
 +
 
 +
Type cd and press enter.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| '''Type at the command prompt'''
 +
 
 +
"pwd"
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Again check our current directory by pwd command. We are back to /home/gnuhata .
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"|
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| We can combine any number of .. [dot dot] separated by / [slash] in a relative path .
 +
 
 +
In this slide, we can see the file system hierarchy. Root or / is at the top. home and bin are two sub-directories under root. username , here the directory named gnuhata is a sub-directory under home. So, now we are in /home/gnuhata. Now how can we go to the bin directory?
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| '''Type at the command prompt'''
 +
 
 +
"cd ../../bin"
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Type at the command prompt
 +
 
 +
"cd space dot dot slash dot dot slash bin" and press enter.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| '''Type at the command prompt'''
 +
 
 +
"pwd"
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Check our current directory by the command pwd.
 +
 
 +
<nowiki>We are at /bin [slash bin] </nowiki>
 +
 
 +
<nowiki>The first .. [narration-dot dot] takes us from /home/gnuhata [slash home slash gnuhata] to /home [narration - slash home] . The next takes us from /home to </nowiki>root. Now from / or root, we have moved to /bin directory.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| '''Type at the command prompt'''
 +
 
 +
"cd"
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Go back to our home directory by the command cd.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| Display Slide 11
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| To create a directory we use the mkdir command.
 +
 
 +
You have to type the command and name of directory to be created and a directory would be created under the current directory.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| '''Type at the command prompt'''
 +
 
 +
'''"mkdir testdir"'''
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| To create a directory named testdir, type the command "mkdir space testdir" and press enter.This creates the testdir directory successfully.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"|
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Note that, there is no explicit notification of successful directory creation or removal. If you do not get any error message, it denotes successful execution.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"|
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| We can also use the relative or absolute pathname to create a directory anywhere in the tree provided we have the permission to do so and a directory by that name doesnot already exist.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"|
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| This process can be used for making multiple directories or even a hierarchy of directories.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| '''Type at the command prompt "mkdir test1 test2"'''
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Type "mkdir space test1 space test2 and press enter ,this will make two directories named test1 and test2 under the present directory.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| '''Type at the command prompt'''
 +
 
 +
"mkdir testtree testtree/test3"
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Type "mkdir space testtree space testtree slash test3". This will make a directory testtree and another directory test3 which is a sub-directory under testtree.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"|
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| So, we have created four directories namely testdir,test1,test2 and testtree in the current directory, out of which first three are empty and the last one contains a subdirectory namely test3.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| Display Slide 12
 +
 
 +
(upto first bullet)
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Similar to mkdir command is the rmdir command which is used for removing a directory or directories.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| '''Type at the command prompt "rmdir test1"'''
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| The command "rmdir space test1" removes the '''test1''' directory successfully.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| Display Slide 11
 +
 
 +
(Second bullet onwards)
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| A directory can be removed only if you are its owner,
 +
 
 +
your current directory is hierarchically above the directory to be removed and the directory is empty.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| '''Type at the command prompt'''
 +
 
 +
"cd testtree/test3"
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Now type at the command prompt "cd space testtree slash test3"
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"|
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| So, we are now in test3 directory which is a subdirectory under testtree.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| '''Type at the command prompt'''
 +
 
 +
"rmdir testdir"
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Lets try to remove the testdir directory by typing the command "'rmdir space testdir"'. Press enter.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"|
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| We see it can't be done, because the current directory is not hierarchically above the directory to be removed.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| '''Type at the command prompt'''
 +
 
 +
'''"cd ../.."'''
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| So,we have to go to the directory which is hierarchically above testdir directory. Type "'cd space dot dot'" and press enter.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"|
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Now, go back to our parent directory by typing the command "cd space dot dot".
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| '''Type at the command prompt'''
 +
 
 +
'''"rmdir testdir" '''
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Now, again try the previous command. Type "'rmdir space testdir'". Press enter. The testdir directory is successfully deleted. Note that, testdir directory was also empty.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"|
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Multiple directories or a hierarchy of directories can be removed at once.So, try to delete the testtree directory along with its subdirectory test3.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| '''Type at the command prompt'''
 +
 
 +
"rmdir testtree testtree/test3/"
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Type at the command prompt
 +
 
 +
"'rmdir space testtree space testtree slash test3'" press enter.
 +
 
 +
See, it is giving the error message that 'testree' directory cannot be removed because testtree is not empty.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| '''Type at the command prompt'''
 +
 
 +
'''"cd testtree"'''
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| But one thing which you may miss is that testtree/test3 has been deleted as it was empty. To check that, type at the command prompt "'cd space testtree'" and press enter.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| '''Type at the command prompt'''
 +
 
 +
'''"ls"'''
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| Now type "ls" and press enter. See, the directory contains nothing. So, test3 was deleted.
 +
|-
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:none;padding:0.097cm;"| Display Slide 13
 +
| style="border-top:none;border-bottom:0.035cm solid #000000;border-left:0.035cm solid #000000;border-right:0.035cm solid #000000;padding:0.097cm;"| So in this linux tutorial we have learnt about Linux Files and directories and how to work with Linux Directories. See them, move between them, make them,remove them. This brings me to the end of this tutorial. Spoken Tutorials are a part of the Talk to a Teacher project, supported by the National Mission on Education through ICT.
 +
More information on the same is available at the following link [http://spoken-tutorial.org/NMEICT-Intro http://spoken-tutorial.org/NMEICT-][http://spoken-tutorial.org/NMEICT-Intro Intro]. This is Anusha Kadambala signing off . Thanks for joining.
 +
 
 +
|}

Revision as of 14:59, 12 November 2014

Title of script: The Linux File System

Author : Anirban Roy Choudhury

Keywords: Files, directories, make directory, remove directory, copy directory

Resources for the tutorial: File:Resources for file system.zip


Visual Cue
Narration
Display slide 1 Welcome to this spoken tutorial on Linux File System.
Display Slide 2 I am using Linux operating system. We assume that you know how to get started with the Linux operating system and have some basic idea about commands. If you are interested, it is available through another spoken tutorial, on the following website http://spoken-tutorial.org.
Also note that linux is case sensitive. All the commands used in this tutorial are in lower case unless otherwise mentioned.
Display Slide 3 In Linux almost everything is a file. So what is a file? In real life we know that a file is where we store our documents and papers. Similarly in Linux a file is a container for storing information.
Display Slide 4 Next what is a directory? A directory can be understood as a collection of files and other (sub)directories.
A directory helps us in organising our files in a systematic manner. This is like what we call folders in Windows. It allows different users to have there own directories with their files which others cannot access or modify.
Also if there are no directories, all the files on the system need to have unique names,which would be very difficult to maintain.
Though these definitions of files and directories are good to get a general feel about them, they are not entirely accurate.
Display Slide 5 As well as its contents, a file has a name and some properties, or “administrative information”; that is, the file’s creation/modification date and its permissions.
The properties are stored in the file’s inode, a special block of data in the file system that also contains the length of the file and where on the disk it’s stored.
The system uses the number of the file’s inode; the directory structure just names the file for our benefit as its easier for us to remember names than large numbers.
Contrary to its oversimplified definition, a directory doesnot actually store other files ,it is itself a file that holds the inode numbers and names of other files.
Display Slide 6 In fact in Linux there are three kinds of files:


1 Regular Files or Ordinary files: It contains only data , as a stream of characters.


2 Directories: As we just saw in the previous slides.


3 Device Files: All hardware devices and peripherals are represented as files in Linux. A CD, a Harddisk or even an usb stick, everything is a file in Linux. But why is this so? This helps to read and write these devices in a way similar to that for ordinary files.

Display Slide 7 All files in Linux are related, in short all form a family much like we do. A directory containing say some files and subdirectories will have a parent – child relationship with each other. This gives rise to the Linux File System Tree.
At the top is the root( denoted by a frontslash /). It contains all the other files and directories. This also helps in easy navigation from one file or directory to other, if we know the correct path. As we work with a Linux file system, it seems that we are moving along this tree. One command and there you are teleported from one place to other.
Sounds interesting!! Indeed it is. As we will see.
Display Slide 8

(upto first bullet)

When we login into the Linux system we are by default in a home directory.
Switch to the terminal Switch to the terminal.
Type at the command prompt

"echo $HOME"

To see the home directory

Type at the command prompt

echo space dollar HOME in capital and press enter.

This gives the pathname of our home directory.
Display Slide 8

(Second bulleted point)

We can move around from one directory to other. But any time we can be in one directory and this directory is known as the current directory or working directory.
The pwd command helps us to see the current directory. pwd stands for present working directory.
Type at the command prompt

"pwd"

Type at the command prompt

"pwd" and press enter. Now this is our present working directory.

Display Slide 9 We have said that we can move from one directory to other. But how do we do so? We have the cd command for this purpose.
You have to type the command cd followed by the pathname of the directory you want to move to.
Type at the command prompt "pwd" Lets again see our current directory by typing pwd at the command prompt. Press enter. So, now we are placed in this directory.
Type at the command prompt

"cd /usr"

Now say we want to move to slash usr directory. So, type

"cd space slash usr" . Remember here slash in linux means front slash and press enter.

Type at the command prompt "pwd" Now lets see our current directory. Type pwd and press enter.

Yes we have moved to slash usr directory.

Display Slide 8(modify the directory names according to your system) The problem here is the pathnames can be very long, this is because these are Absolute Pathnames that enlist the entire path staring from the root directory.
Instead we may use Relative pathnames that begin from the current directory. Here we need to know two special characters.


dot that represent the current directory and dot dot that represent the parent directory of the current directory.

(change the portion 'anirban' in the narration according to your computer) Now let us have a brief session on cd command
Type at the command prompt

"cd"

The command cd without any argument is used to move back to the home directory. Type at the command prompt

"cd" and press enter.

Type at the command prompt

"pwd"

Now check our current directory by the pwd command.

So, now we are back in our home directory

/home/gnuhata [ slash home slash gnuhata ] </nowiki>

Type at the command prompt

"cd Music/"

Now let us move to music directory. Type at the command prompt "cd space Music (M in capital) slash" and press enter
Type at the command prompt

"pwd"

Now check our current directory by the pwd command. pwd and press enter.

See, we have moved /home/gnuhata/Music

Type at the command prompt

"cd .."

Let us go to the parent directory of Music. For that you have to use cd command with dot dot. Type at the command prompt cd space dot dot and press enter.
Type at the command prompt

"pwd"

Now check our present directory by typing pwd. We are again in /home/gnuhata
Type at the command prompt

"cd ./Documents/"

Now lets try to move to a subdirectory of the current directory using dot. Type at the command prompt cd space dot slash Documents(D in capital) slash. Press enter.
Type at the command prompt

"pwd"

Check our current directory by typing pwd. We are at /home/gnuhata/Documents
Type at the command prompt

"cd"

Let me clear the screen by pressing control L. So you can see clearly.Go back to our home directory by cd command.

Type cd and press enter.

Type at the command prompt

"pwd"

Again check our current directory by pwd command. We are back to /home/gnuhata .
We can combine any number of .. [dot dot] separated by / [slash] in a relative path .

In this slide, we can see the file system hierarchy. Root or / is at the top. home and bin are two sub-directories under root. username , here the directory named gnuhata is a sub-directory under home. So, now we are in /home/gnuhata. Now how can we go to the bin directory?

Type at the command prompt

"cd ../../bin"

Type at the command prompt

"cd space dot dot slash dot dot slash bin" and press enter.

Type at the command prompt

"pwd"

Check our current directory by the command pwd.

We are at /bin [slash bin]

The first .. [narration-dot dot] takes us from /home/gnuhata [slash home slash gnuhata] to /home [narration - slash home] . The next takes us from /home to root. Now from / or root, we have moved to /bin directory.

Type at the command prompt

"cd"

Go back to our home directory by the command cd.
Display Slide 11 To create a directory we use the mkdir command.

You have to type the command and name of directory to be created and a directory would be created under the current directory.

Type at the command prompt

"mkdir testdir"

To create a directory named testdir, type the command "mkdir space testdir" and press enter.This creates the testdir directory successfully.
Note that, there is no explicit notification of successful directory creation or removal. If you do not get any error message, it denotes successful execution.
We can also use the relative or absolute pathname to create a directory anywhere in the tree provided we have the permission to do so and a directory by that name doesnot already exist.
This process can be used for making multiple directories or even a hierarchy of directories.
Type at the command prompt "mkdir test1 test2" Type "mkdir space test1 space test2 and press enter ,this will make two directories named test1 and test2 under the present directory.
Type at the command prompt

"mkdir testtree testtree/test3"

Type "mkdir space testtree space testtree slash test3". This will make a directory testtree and another directory test3 which is a sub-directory under testtree.
So, we have created four directories namely testdir,test1,test2 and testtree in the current directory, out of which first three are empty and the last one contains a subdirectory namely test3.
Display Slide 12

(upto first bullet)

Similar to mkdir command is the rmdir command which is used for removing a directory or directories.
Type at the command prompt "rmdir test1" The command "rmdir space test1" removes the test1 directory successfully.
Display Slide 11

(Second bullet onwards)

A directory can be removed only if you are its owner,

your current directory is hierarchically above the directory to be removed and the directory is empty.

Type at the command prompt

"cd testtree/test3"

Now type at the command prompt "cd space testtree slash test3"
So, we are now in test3 directory which is a subdirectory under testtree.
Type at the command prompt

"rmdir testdir"

Lets try to remove the testdir directory by typing the command "'rmdir space testdir"'. Press enter.
We see it can't be done, because the current directory is not hierarchically above the directory to be removed.
Type at the command prompt

"cd ../.."

So,we have to go to the directory which is hierarchically above testdir directory. Type "'cd space dot dot'" and press enter.
Now, go back to our parent directory by typing the command "cd space dot dot".
Type at the command prompt

"rmdir testdir"

Now, again try the previous command. Type "'rmdir space testdir'". Press enter. The testdir directory is successfully deleted. Note that, testdir directory was also empty.
Multiple directories or a hierarchy of directories can be removed at once.So, try to delete the testtree directory along with its subdirectory test3.
Type at the command prompt

"rmdir testtree testtree/test3/"

Type at the command prompt

"'rmdir space testtree space testtree slash test3'" press enter.

See, it is giving the error message that 'testree' directory cannot be removed because testtree is not empty.

Type at the command prompt

"cd testtree"

But one thing which you may miss is that testtree/test3 has been deleted as it was empty. To check that, type at the command prompt "'cd space testtree'" and press enter.
Type at the command prompt

"ls"

Now type "ls" and press enter. See, the directory contains nothing. So, test3 was deleted.
Display Slide 13 So in this linux tutorial we have learnt about Linux Files and directories and how to work with Linux Directories. See them, move between them, make them,remove them. This brings me to the end of this tutorial. Spoken Tutorials are a part of the Talk to a Teacher project, supported by the National Mission on Education through ICT.

More information on the same is available at the following link http://spoken-tutorial.org/NMEICT-Intro. This is Anusha Kadambala signing off . Thanks for joining.

Contributors and Content Editors

Nancyvarkey, PoojaMoolya

Retrieved from "https://script.spoken-tutorial.org/index.php?title=BOSS-Linux/C2/File-System/English&oldid=17719"