View source for KiCad/C2/Designing-circuit-schematic-in-KiCad/Khasi

{| border = 1

|'''Time'''
|'''Narration'''

|-
| 00:01
| Paralok baieid, Ngi pdiang sngewbha ia phi sha ka '''Spoken Tutorial''' halor ka '''“Designing circuit schematic ha ka  Kicad”'''.
|-
| 00:08
|  To ngin peit ia ki kyndon (lain) kumno ban leh  'PCB' designing  .
|-
| 00:12
| Ka bynta ba nyngkong ka long ban shna '''schematic''' na ka bynta ka circuit ba la buh
|-
| 00:16
| Ka bynta kaba ar ka long ban pynmih (generate) '''netlist'''.
|-
| 00:19
| Ka bynta ba lai ka long ban leh mapping (map) ia ki components kiba iadei bad ka footprints. 
|-
| 00:22
|Bad ka bynta kaba saw ka long ban shna '''board layout''' ia ka circuit.
|-
| 00:27
|Ha kane ka jinghikai ngin ia pule ia ki bynta ba nyngkong, kata ka long
|-
| 00:32
|Ban shna ia ka '''schematic''' na ka bynta ka circuit ba la buh.
|-
|00:35
| Hangne ngi pyndonkam da ka '''Ubuntu 12.04''' kum ka '''operating system'''
|-
|00:40
| Bad da ka '''KiCad''' version: '''2011 hyphen 05 hyphen 25'” na ka bynta kane ka jinghikai
|-
| 00:49
| Khyndiat ka jingtip shaphang ka electronic circuit ka long kaba donkam ha kane ka jinghikai
|-
| 00:56
|Ngin pyndonkam da ka '''Astable multivibrator''' kum ka circuit ba shu ai nuksa ha kane ka jinghikai
|-
| 01:04
|Ban sdang ia ka KiCad - Leit hajrong sha kadiang duh jong ka Ubuntu desktop screen.
|-
| 01:08
|Click  ha u icon ba nyngkong kata kaba mut u '''Dash home'''.
|-
|01:12
|Ha ka search bar, thoh: 'KiCad' bad nion (press) '''Enter'''.
|-
| 01:19
|Ka '''KiCad main window''' kan sa paw ha ka screen.
|-
| 01:22
| Da kynmaw ba ha ka Ubuntu 12.04, ka menu bar jong ka KiCad ka paw ha ka panel ba hajrong jong ka Ubuntu desktop.
|-
| 01:30
|Ban sdang ia ka project, click ia ka '''File''' bad nangta pat sa clcik '''New'''.
|-
| 01:35
|Ai ia ka kyrteng jong ka project. Kum ka nuksa, "project1".
|-
| 01:42
| Kynmaw ba kane ka  project kan shah saved da ka '.pro' extension.
|-
|01:47
| To ngan pynheh ia ka window khnang ban iohi kham bha.
|-
| 01:52
| kynmaw ba hangno ba la saved ia ka project jong phi bad  pynkylla ia ka directory lada donkam
|-
| 01:58
|Bad sa Click  '''Save'''.
|-
| 02:01
| Ia ka Circuit schematics la shna ha ka KiCad da kaba pyndonkam ia ka '''EESchema'''.
|-
| 02:06
|Peit ngan pyni ha phi kumno ban sdang ia ka 'EESchema' ha ka  KiCad.
|-
|02:10
| U tab ba nyngkong ha ka panel ba hajrong jong ka KiCad main window la ju khot  'EESchema' lane '''schematic editor'''.
 
|-
| 02:19
|Haba click ia u  'EESchema' tab kane kan plie ia ka schematic editor.
|-
| 02:23
|Ka '''Info''' dialog-box kan paw kaba ong ba kam lap ia ka schematic.
|-
| 02:28
|Bad sa click '''OK'''.
|-
| 02:32
|To ngin shna hangne ia ka circuit schematics.

|-
| 02:35
| Leit sha ka panel ba sha kamon jong ka 'EESchema' window. 
|-
|02:38
| Bad sa click '''Place a component''' button.
|-
| 02:42
| Mynta, click ha kaba suda (blank) jong ka 'EESchema' window.
|-
| 02:46
| Kine ki '''component selection''' window kin sa plie.
|-
| 02:49
| Mynta, ngin buh ia u '''555 timer IC schematic''' ha ka EESchema window.
|-
| 02:56
|Ha ka '''Name''' field jong ka component selection window, thoh "555" bad sa click '''OK'''.
|-
| 03:05
|Kane kan pyni ia ka jubab ba ngi wad kum ka '''LM555N'''.
|-
| 03:11
|Jied ia kane ka jubab ba mih bad sa click '''OK'''.
|-
| 03:14
|Ka component’s schematic kan paw ha ka EESchema window.
|-
| 03:19
|Kan sa iateh bad u cursor jong phi.
|-
| 03:22
| Buh ia u component ha ka centre jong ka screen da kaba click shisien.
|-
| 03:27
| Ban pynheh bad pynrit, ban iohi kham bha, pyndonkam da u scroll button jong u '''mouse'''.
|-
| 03:35
| Buh ia u cursor ha ki component kaba phi kwah ban pyheh bad pynrit.
|-
| 03:39
|Phi lah ruh ban pyndonkam ia u 'F1' bad 'F2' keys ban pynheh bad pynrit hajuh ka por.
|-
| 03:46
| Phi lah ban iohi lane ban ym iohi ia ka 'VCC'' bad 'GND' kata kaba mut ka ground terminal jong ka '555 IC'.
|-
| 03:56
| Lada phim iohi ia ka, leit sha ka panel ba sha kadiang jong ka EESchema window,
|-
| 04:00
| click ha u '''Show hidden pins''' button.
|-
| 04:04
|Mynta, ngin buh ia u resistor ha ka EESchema window.
|-
| 04:09
|Ia ka '''Place a component''' option lah dep ban jied lypa da ma ngi.
|-
| 04:13
|Te, sa shu click beit ha u EESchema bad phin iohi ia ki '''component selection''' window.
|-
| 04:21
|Ha ka '''Name''' field, thoh 'r' bad sa click  '''OK'''.
|-
| 04:26
| Ka '''Resistor schematic'''kan ka paw ha u EESchema uban sa iateh bad u cusor jong phi.
|-
| 04:32
|Buh ia u resistor sha jan jong u EESchema da kaba click shisien.  
|-
| 04:37
|Ngi donkam sa artylli ki resistors.
|-
| 04:39
|Ngi lah ban ioh artylli ki resistors da kaba pyndonkam ia u '''Place a component''' button.
|-
| 04:42
|Hynrei, namar ngi la da don lypa ia u resistor, to ngin peit kumno ban copy ia ki component.
|-
| 04:48
| Ban bud ia ki component, click na kamon jong ki cpmponent bad sa jied '''Copy Component'''.
|-
| 05:01
|Ka copy jong ki component kan sa iateh bad u cursor jong phi.
|-
| 05:05
|Buh ia u resistor sha jan jong u EESchema da kaba click shisien.  
|-
| 05:11
|Ia kane lah ban leh kham sted da kaba pyndonkam da u shotcut'c'.
|-
| 05:16
|Na ka bynta kane, buh ia u cursor ha ki component bad sa nion 'c'.
|-
| 05:22
| Kumjuh biang kan sa iateh lang bad u cursor jong phi
|-
| 05:27
|Click shisien ban buh ia ka.
|-
| 05:30
|  Ka list jong ki shortcuts lah ban ioh da kaba nion '''Shift''' bad '''?''' (question mark) key.

|-
| 05:36
|Kine ki long ki list jong ki keyboard shortcuts.
|-
| 05:40
|Khang ia kane ka window.
|-
| 05:43
|Click ha u EESchema window ban plie ia ka '''component selection''' window.
|-
| 05:49
|Nangta pat, ngi donkam artylli u capacitors, electrolytic bad ceramic.
|-
| 05:53
| Thoh "cp1" ban add electrolytic capacitor bad click '''OK'''.
|-
| 06:00
|Thoh 'c' ban add ceramic capacitor bad click '''OK'''.
|-
| 06:06
|Ngi donkam ruh ia ka  '''Light Emitting Diode''', ba ju tip kum ka 'LED'.
|-
|06:10
|Ha ka component selection window, thoh: "led" bad sa click '''OK'''.
|-
|06:17
| Mynta, ngi donkam ia ka bor lait kata kaba mut ka 'Vcc' bad ki '''Ground terminals'''.  
|-
| 06:22
| Ha ka panel ba sha kamon jong ka EESchema, click ia u '''Place a power port''' button.
|-
| 06:29
|Click shisien ha u  EESchema ban plie ia ki component selection window.
|-
| 06:34
|Click ia ka '''List All''' button bad phin iohi ia ka list jong bun jait ki power notations.
|-
| 06:40
|Jied '''+5V''' (plus 5 volt) bad sa click '''OK'''.
|-
| 06:48
|Buh ia ki component da kaba click shisien ha ka EESchema window.
|-
| 06:52
|Kumjuh ruh, ban ioh ka ground terminal,
|-
| 06:54
|Jied '''ground''' from the list and click on '''OK'''.
|-
| 07:01
|To ngan jied da ki '''ground terminal'''...
|-
| 07:08
| Ngi donkam ruh ia u '''connector''' ban pyndait ia ka bor ding (power supply) ba na shabar.
|-
| 07:14
|Click ha u EESchema ban pie ia ki component selection window.
|-
| 07:19
| Click ha ka '''List All''' button bad phin iohi ia ka list.

|-
| 07:24
|Jied '''conn''' option bad sa click '''OK'''. 

|-
| 07:31
|Tan shapoh bad jied  '''CONN_2''' na ka list bad sa click '''OK'''.
|-
| 07:41
| Artylli ki terminal connector kin sa paw. Kine kin sa iateh  bad u '''mouse pointer'''.
|-
| 07:48
|Click shisien ban buh ia ka.
|-
|07:56
|Mynta, ngin buh ryhtih ia ki components da kaba pynkhih ia ki sha ka jaka kaba biang.
|-
| 08:01
|Ngin pyndonkam da ki  shortcut key 'm' ban pynkynriah ia ki components.
|-
| 08:04
|Ban pynkhih ia u component, buh ia u  mouse-pointer ha u component, shu ong u 'resistor', bad sa nion 'm'.
|-
|08:15
| Ngin buh ia une u  resistor sha kamon jong ka '''IC 555''' da kaba click ha u  EESchema.
|-
| 08:28
| Ngin pyndonkam da ki (keyboard) shortcut key 'r' ban pynshad ia u 'LED' bad pynbeit ia u da k aba pyn-ieng.
|-
|08:40
| Mynta, ngin peit kumno ban pyniadait lane '''wire''' ia ki components kat kum ka circuit diagram.
|-
| 08:45
| To ngin sdang ia ki jingpyniadaitjong ki components.
|-
| 08:48
| Ha ka panel ba sha kamon jong ka EESchema, click ha u  '''Place a wire''' button.
|-
| 08:56
|Mynta ngin pyndait ia artylli ki resistors.

|-
|08:58
| Ngin pyndait ia u wire da kaba click ha uno uno u '''node'''s jong artylli ki resistors. 
|-
| 09:11
|Mynta, ngin pyndait ia u 7th pin jong ka '''IC 555''' sha u wire ba pyndait ia artylli ki resistor.   
|-
| 09:18
|Click ha u 7th pin jong ka '''IC 555''' bad nangta ha u  wire ba pyndait ia artylli ki resistors.
|-
| 09:30
| Buh jingmut ba kane kan sa pynkylla hi kum ka lad kaba paw kum u node.
|-
| 09:35
|Nga lah dep lypa ban ipyndait ia u component bad saved ia ki.
|-
| 09:39
| Mynta ngan plie bad pyndonkam da ka schematic ba la dep shna lypa ban bate ia ka por.
|-
| 09:44
| Ngan leit sha ka '''File''' menu bad click '''Open'''.
|-
| 09:53
|Ka '''Confirmation''' window kan plie. Click '''Yes'''. 

|-
| 10:04
|Ngan jied da ka 'project1.sch' na ka jaka ba la buh.

|-
| 10:18
| To ai ba ngan '''resize''' kane ka window kaba nyngkong
|-
| 10:22
|Bad nangta ngan sa click '''Open'''.
|-
| 10:29
|Ngan click '''Open'''.
|-
| 10:33
|Kane ka dei ka schematic ba la dep shna ha shuwa
|-
| 10:36
| Mynta ngi lah ban iohi kumno ban  ai jingbatai  ia ki component
|-
| 10:39
|Ki jingbatai ba pynrung ha ki dur ne ki dak  ki ai ia ka jingithuh bapher ia man la ki component.
|-
| 10:43
|Annotating kan kylliang ia ki dak jingkylli jong ki components da ki numbers kiba pher.
|-
| 10:50
|Hajrong jong ka panel jong ka EESchema, click ha ka '''“Annotate schematic”''' button.
|-
| 10:58
|Kane kan plie ia ka '''Annotate Schematic''' window.
|-
|11:02
|Ha kane ka window, buh ia ka configuration kumba ka long.
|-
|11:05
|  Click ha ka '''Annotation''' button.
|-
|11:09
|Kane kan maham ia phi ba kan  annotate tang ia ki un-annotated components.
|-
|11:13
|Click  '''OK'''.

|-
| 11:15
|Click ha u '''Close''' button jong ka '''Annotate Schematic''' window.
|-
|11:20
|Da kynmaw ba ki dak jingkylli  ha ki components la dep bujli da ki unique numbers.
|-
|11:30
|Click ha ka '''File'''
|-
| 11:37
| Bad jied da ka '''Save Whole Schematic Project''' ban save ia kane ka schematic.
|-
| 11:43
|Click ha ka '''File''' bad jied '''Quit'''.
|-
| 11:48
| Kane kan khang ia ka EESchema window.
|-
|11:50
|Mynta, leit sha ka '''KiCad''' main window.
|-
|11:53
|Click ha ka '''File''' bad jied '''Quit'''.

|-
| 11:56
| Kane ka pynkut ia ka jimthmu jong ka jinghikai ha kaban shna ia ka'''circuit schematic''' da ka KiCad.  
|-
| 12:01
| To ngin batai kyllum ia kaei kaba ngi la nang ha kane ka jinghikai 
|-
| 12:05
|Ha kane ka jinghikai, ngi la nang
 
|-
| 12:07
|Kumno ban pyndonkam ia ka EESchema ha ka KiCad ban shna circuit schematic.
|-
| 12:11
| Annotation jong ka circuit schematic. 

|-
| 12:15
| Pyndep ia kine ki assignment harum-
|-
| 12:17
|Buh ia ki component 'Inductor' ha ka EESchema da kaba pyndonkam da ka component selection window.
|-
|12:24
|Pyniar ia ki shortcut keys 'a', 'x' and 'y'.

|-
| 12:31
|Peit ia ka video kaba don ha ka link harum.
|-
| 12:35
|Kan batai kyllum ia ka Spoken Tutorial project.
|-
| 12:37
| Lada phim don ia ka bandwith kaba biang, sa shu download bad peit.
|-
| 12:43
| Ka Spoken Tutorial project team:
|-
| 12:45
| Ka ai ki jingai jinghikai (workshops) da kaba pyndonkam da ki spoken tutorials.
|-
| 12:48
| Ka ai certificates ruh ia kito kiba pass ia ka onlain (online) test.
|-
| 12:52
|Ban tip bniah, sngewbha thoh sha ka: Contact at spoken hyphen tutorial dot org.
|-
| 12:59
|'''Spoken Tutorial''' project ka dei shibynta jong ka '''Talk to a Teacher''' project.
|-
| 13:03
|La kyrshan ia kane da ka National Mission on Education lyngba ka ICT, MHRD, ka Sorkar India.
|-
| 13:09
|Shibun ki jingtip kiba iadei bad kane ka jingthmu ka don ha ka:
|-
| 13:13
|spoken hyphen tutorial dot org slash NMEICT hyphen Intro.
|-
| 13:20
|Ia kane ka jingthoh (script) la noh synniang da u George B. Warjri.
|-
| 13:25
|Nga dei u John na '''Meghalaya''', ngan pynkut noh. Khublei shibun.