View source for Arduino/C4/Getting-Ready-for-Arduino-FLOSS/English-timed



{| border="1"
|-
|| '''TIME'''
|| '''NARRATION'''
|-
|| 00:01
|| Welcome to the Spoken tutorial on '''Getting ready for Arduino FLOSS.'''
|-
|| 00:07
|| In this tutorial, we will learn about
How to download the e-book and code files from the '''FLOSS-Arduino '''website
|-
|| 00:17
|| Arduino Shield 

|-
|| 00:19
||  Microcontroller Programming with''' Arduino IDE'''

|-
|| 00:24
|| '''FLOSS''' firmware
|-
|| 00:26
|| To record this tutorial, I’m using

'''Ubuntu Linux '''OS version 18.04 
|-
|| 00:35
||  '''Arduino Shield'''

|-
|| 00:37
||  '''Arduino Uno Board ''' and

|-
|| 00:40
||  '''Arduino IDE'''
|-
|| 00:43
||To follow this tutorial,you should be familiar with 

'''Arduino''' '''Uno Board'''
|-
|| 00:50
||  Any Programming language
|-
|| 00:53
|| If not, then go through the relevant spoken tutorials on this website.

|-
|| 00:59
|| Go through the '''Arduino Spoken Tutorials''' to know about:
|-
|| 01:04
||  Hardware components
|-
|| 01:07
|| Installation of '''Arduino IDE'''
|-
|| 01:10
|| Selecting the port in '''Arduino IDE '''and
|-
|| 01:14
|| Compiling and uploading a program
|-
|| 01:18
||First, let us download the''' e-books''' and the code files required for the experiments.
|-
||01:25
 ||Go to the '''FOSSEE ''' website developed by the '''FOSSEE''' team at ''' IIT Bombay.'''
|-
|| 01:33
|| Scroll down and locate the '''FLOSS Arduino'''. Click on it.
|-
|| 01:39
|| It will open the '''FLOSS Arduino''' webpage.
|-
|| 01:43
||  On the '''Home''' page, click on the '''FLOSS''' link in the left panel.
|-
|| 01:49
||  You will know more information about the '''FLOSS''' that are used in the e-book.
|-
|| 01:55
||  We have covered various FLOSS like''' Arduino IDE, Python, Scilab, Xcos, Julia,''' and '''OpenModelica'''.
|-
|| 02:05
|| Next, click on the '''Resources''' menu in the top menu bar.
|-
|| 02:10
||  Information about the '''Arduino shield''' and '''project''' file is available here.
|-
|| 02:17
||  The required '''gerber''' files to make the shield are given in this link.
|-
|| 02:23
||  '''Bill of material''' is available in this link.
 |-
|| 02:27
|| Also, you can see the information regarding where to buy the '''Arduino shield.'''
 |-
|| 02:34
|| You can also do experiments with the breadboard and the required components.
|-
|| 02:42
||  You can buy the components from the link given on the website.

|-
|| 02:47
|| Next, click on the '''Downloads''' tab.
|-
|| 02:51
||  You can see links to''' .pdf '''files, which contain the soft copy of the books.
|-
|| 02:58
||  Download the book on your computer based on your interest.
 |-
|| 03:04
|| You can see an '''Origin '''zip file link.
|-
|| 03:08
||  This contains the code files that are used in the books for various experiments.
 |-
|| 03:15
|| Download the zip file and extract the file on the '''Desktop.'''
|-
|| 03:21
|| I have downloaded all the '''e-books''' and the '''Origin''' folder on my desktop.
|-
|| 03:28
||Let us see the content of the'''Origin''' folder .
|-
|| 03:32
|| Open the '''Origin''' folder.
|-
|| 03:35
|| We can see two folders as '''tools''' and '''user-code.'''
|-
|| 03:40
|| In the '''tools''' folder, we have given the toolbox required for various software.

|-
|| 03:47
|| Follow the instructions given in the book on how to load the toolbox.

|-
|| 03:53
|| In the'''user-code '''folder, all the codes required for various experiments are given here.
|-
|| 04:00
||In this tutorial,we will see how to run experiments on'''Arduino IDE.'''

|-
|| 04:06
|| I’ll open the''' python.pdf''' and show the various chapters of the book.

|-
|| 04:13
||  Refer to chapter 3 in the book that you have downloaded.
|-
|| 04:18
||  Follow the steps given for the installation of '''Arduino IDE '''
|-
|| 04:26
||  Install the '''Arduino IDE''' depending upon your OS
|-
|| 04:32
||  The experiments that are covered in the book are tested in''' Ubuntu Linux 18.04 and Windows 10 OS.'''
|-
|| 04:42
|| You have to install '''Arduino IDE 1.8.13''' either in''' Linux or Windows OS.'''
|-
|| 04:51
|| Note that an internet connection is required to do the installation.
|-
|| 04:57
|| Next, let us see the picture of the shield.

|-
|| 05:01
|| This is the shield developed by the '''FOSSEE''' team.
|-
|| 05:06
|| It contains various components required for the experiments.
|-
|| 05:11
|| It is a ready-to-use shield that is wired with the respective pin of the Arduino''' Uno board.'''
|-
|| 05:19
|| We will perform the below experiments using the shield.
|-
|| 05:25
||  Interfacing a Light Emitting Diode
|-
|| 05:28
||  Interfacing a Pushbutton
|-
|| 05:31
|| Interfacing a Light Dependent Resistor
|-
|| 05:35
||  Interfacing a Potentiometer
|-
|| 05:38
||  Interfacing a Thermistor
 |-
|| 05:41
|| Interfacing a Servo Motor
|-
|| 05:44
|| The next two experiments are performed without the shield.
|-
|| 05:49
|| Interfacing a DC Motor
|-
|| 05:52
|| Implementation of Modbus Protocol

|-
|| 05:56
||First, connect the shield to the '''Arduino Uno board'''.
|-
|| 06:01
|| Then connect the board to the USB port of the computer.
|-
|| 06:07
|| Open the '''Linux''' terminal by pressing Ctrl+Alt+T keys simultaneously.
|-
|| 06:14
|| First we have to check the port on which the '''Arduino''' '''Uno '''board is connected.
|-
|| 06:20
|| Type the below command.
|-
|| 06:23
|| In my case, the port is '''ttyACM0'''.
|-
|| 06:28
|| Please note down the port in your system.
|-
|| 06:32
|| Type the command as shown to give the read, write permission to the port.
|-
|| 06:38
|| Enter the system password if prompted
|-
|| 06:43
|| This command has to be executed each time when you connect the Arduino board to the computer.
|-
|| 06:51
|| I have already installed '''Arduino IDE''' in my system as specified in the book.
|-
|| 06:59
|| Follow the steps as shown in chapter 3 and launch Arduino IDE.
|-
|| 07:06
|| '''Arduino IDE '''opens as shown here.
|-
|| 07:10
|| Click on the '''Tools''' menu and select '''Port'''.

|-
|| 07:14
|| Make sure the port '''ttyACM0''' is selected.
|-
|| 07:20
||Let us test the working of the '''Arduino Uno board''' with a simple program.
|-
|| 07:26
|| Let us check the experiment specified in chapter 4. That is, '''Interfacing a Light Emitting Diode.'''
|-
|| 07:37
|| This program will light the blue '''LED''' on the shield.
|-
|| 07:42
|| In the '''Arduino IDE''', open the file available at '''Origin slash user-code slash  led slash arduino slash led-blue slash led-blue.ino'''
|-
|| 08:01
|| Compile and upload the program.
|-
|| 08:06
|| Now we can see the blue '''LED''' is turned on.
|-
|| 08:11
|| This shows the '''Arduino Uno board''' and the shield are working correctly.
|-
|| 08:17
|| Likewise, practice the other experiments with arduino code that are specified in the book.
|-
|| 08:26
|| Now we will learn how to connect Arduino with various FLOSS.
|-
|| 08:32
|| For this, we have to upload the '''FLOSS''' firmware on the '''Arduino''' '''Uno board''' using '''Arduino IDE.''' 
|-
|| 08:41
|| This firmware is an '''Arduino''' file with '''.ino''' extension.
|-
|| 08:48
|| Why do we need '''FLOSS''' Firmware?
This enables the communication between'''FLOSS''' and Serial port.
|-
|| 08:58
|| It will decode and execute the commands sent by other '''FLOSS'''.
|-
|| 09:04
|| For example FLOSS such as '''Python''', '''Scilab, Julia, OpenModelica etc.'''
|-
|| 09:12
|| Now we will upload the '''FLOSS''' firmware to the '''Arduino Uno board.'''
|-
|| 09:18
|| In the '''Arduino IDE''', open the file available at''' Origin slash tools slash floss hyphen firmware slash floss hyphen firmware.ino'''
|-
|| 09:33
|| Compile and upload the program.
|-
|| 09:37
|| We can see the success message at the bottom of the IDE.
|-
|| 09:42
|| It shows '''FLOSS''' firmware has been properly installed.
|-
|| 09:47
|| '''Points to remember:'''
|-
|| 09:50
||  Whenever you plug the '''Arduino Uno board''' into the computer, check for the port.
|-
|| 09:57
||  Then execute the command required for read-write permission. 
|-
|| 10:03
||  Don’t upload any '''Arduino''' program after uploading the '''FLOSS''' firmware to '''Arduino Uno board.'''
|-
|| 10:12
|| This would overwrite the '''FLOSS '''firmware.

|-
|| 10;16
|| With this, we come to the end of this tutorial. Let us summarize.
|-
|| 10:24
|| In this tutorial, we learnt about

How to download the e-book and code files from the '''FLOSS-Arduino '''website
|-
|| 10:35
|| '''Arduino''' Shield 
|-
|| 10:37
|| Microcontroller Programming with''' Arduino IDE'''
|-
|| 10:42
|| '''FLOSS''' firmware
|-
|| 10:44
|| The video at the following link summarizes the''' Spoken Tutorial '''project.
Please download and watch it.
|-
|| 10:53
|| The '''Spoken Tutorial''' Project Team conducts workshops and gives certificates.
For more details, please write to us.
|-
|| 11:04
||  Please post your timed queries on this forum.
|-
|| 11:08
|| Spoken Tutorial project is funded by the Ministry of Education (MoE), Govt. of India.
|-
|| 11:15
|| This is Nirmala venkat from Spoken Tutorial Project, IIT Bombay, signing off.
Thanks for joining.
|-
|}