View source for KiCad/C2/Electric-rule-checking-and-Netlist-generation/Khasi

{| border = 1

|'''Time'''
|'''Narration'''

|-
| 00:01
| Paralok baieid,
|-
| 00:03
| Ngi pdiang sngewbha ia phi sha ka '''spoken tutorial''' halor ka '''Electric rule check and Netlist generation in KiCad'''.
|-
| 00:09
| Ha kane ka jinghikai, ngin pule shaphang
|-
| 00:12
|Ban buh ia ki values jong ki component
|-
| 00:14
|Ban leh '''electric rule check''' bad 

|-
| 00:17
|Ban pynmih  '''netlist ''' ia ka '''schematic''' ba la dep shna.  

|-
| 00:21
|Hangne ngi pyndonkam da ka '''Ubuntu 12.04''' kum ka operating system  
|-
| 00:25
|Bad da ka '''KiCad''' version: '''2011 hyphen 05 hyphen 25'” na ka bynta kane ka jinghikai.
|-
|00:33
| Khyndiat ka jingtip shaphang ka electronic circuit ka long kaba donkam ha kane ka jinghikai
|-
|00:38
|U nongpyndonkam u hap ban tip ruh:* kumno ban design '''circuit schematic''' ha ka '''KiCad'''
|-
| 00:42
|Na ka bynta ki jinghikai kiba iadei, sngewbha leit sha ka: '''spoken hyphen tutorial.org'''
|-
| 00:49
|Ban sdang ia ka KiCad -
|-
| 00:50
|Leit hajrong sha kadiang duh jong ka Ubuntu desktop screen.
|-
| 00:56
|Click ha u icon ba nyngkong kaba mut '''Dash home'''.
|-
| 01:01
|Ha ka search bar , thoh "KiCad" bad  nion '''Enter'''.
|-
|01:10
|Kane kan plie ia ka '''KiCad main window'''.
|-
| 01:13
|Click ha u '''EEschema''' tab.
|-
| 01:17
| Ka '''Info''' dialog-box  ka paw kaba ong ba kam lap ia ka schematic.
|-
| 01:21
|Bad Click  '''OK'''.
|-
| 01:23
| Ngin jied ia ka file 'project1.sch' ba la dep shna lypa.
|-
|01:29
| Leit ha ka '''File''' menu bad sa click '''Open'''.

|-
| 01:33
|Jied 'project1.sch' na ka jaka ba la buh.
|-
| 01:44
| Mynta ngin buh ia ka values jong ki components.
|-
| 01:49
| To ngin  buh ia ka value ha u 'R2' component.
|-
| 01:54
|Buh ia u cursor halor u 'R', ba iadei bad u ''''R2' resistor'''.
|-
|02:01
|Click sha kamon bad jied '''Field Value'''.
|-
| 02:05
|Kane kan plie ia ka'''Edit Value Field''' window.
|-
| 02:11
|Thoh "1M" bad sa click '''OK'''.
|-
| 02:17
|Kumba phi iohi, '1M' (i.e. 1 mega ohm) value lah buh ha u  '''resistor 'R2'.'''  
|-
| 02:24
| Nga la dep ban buh ia ki values sha kiwei pat ki components ha kajuh ka rukom.
|-
|02:29
|Nangta pat hap ban leh '''electric rules check''' ha kane ka circuit.
|-
| 02:36
| Leit ha ka panel ba hajrong jong ka 'EEschema' window.
|-
| 02:39
| Click ha u '''Perform electric rules check''' button
|-
| 02:44
| Kane kan plie ia ka '''EEschema Erc''' window.
|-
| 02:48
|Click ha u'''Test Erc''' button.
|-
| 02:52
| Mynta ngi lah ban iohi artyli ki '''error'''s.
|-
| 02:56
|Artylli ki errors kiba ong ba ki '''terminal'''s kim don bor ding.
|-
| 03:00
|Click ha u '''Close''' button.   
|-
| 03:03
|Ha ka '''schematic''', ki '''error node'''s  la pynkdew da u khnam.
|-
| 03:12
| To ngin pyndait ia u '''power Flag''' hangne. Te, nangta ka KiCad kan tip ba ngi la pyndait bor ding hangne. 

|-
| 03:22
| Na ka bynta kane,
|-
| 03:24
|Sha kamon jong ka panel, click ha u '''Place a power port''' button.
|-
| 03:29
| Mynta, click ha ka 'EEschema' window ban plie ia ka '''component selection''' window.

|-
| 03:34
|  Click ha u '''List All''' button bad phin iohi ia ka list jong ka power notations.
|-
| 03:40
|  Jied ia ka '''PWR_underscore FLAG''' bad sa click '''OK'''.
|-
| 03:49
|Ngin buh ia u  '''Power flag''' hajan jong ka ''''VCC' terminal'''.
|-
| 03:55
|Click ha u '''EEschema''' ban buh ia ka.
|-
| 03:59
|Ngi donkam artylli ki '''power flag'''s namar ba don artylli ki errors ba kumjuh.
|-
| 04:05
|Buh ia u cursor ha ka ka power flag bad sa nioh ban 'c' copy ia ka.
|-
| 04:10
|  Buh ia u power flag hajan ka '''ground terminal'''.
|-
| 04:15
|Mynta, ngin pyndait ia ka power flag bad ki wires. Leit sha ka panel ba sha kamon bad click '''Place a wire''' button.
|-
| 04:24
|Mynta, pyndait ia ka '''power flag''' sha ka '''VCC terminal'''.

|-
| 04:35
| Kumjuh ruh, pyndait ia ka '''power flag''' sha ka '''ground terminal'''.
|-
| 04:44
|Mynta ngin pyniad ia ka '''Schematic ERC check''' sa shisien ban pyntikna.
|-
| 04:49
| Na ka bynta kane, click ha u '''Perform electric rules check''' ba ha panel ba hajrong duh jong ka 'EEschema' window.
|-
| 04:55
|Kane kan plie ia ka'EEschema Erc' window.
|-
| 04:58
|Click ha u '''Test Erc''' button.
|-
| 05:01
|Mynta ngi lah ban iohi ba ym don jingbakla shuh.
|-
| 05:04
|Sa click '''Close'''.
|-
| 05:07
| Mynta, to ngin peit kumno ban generate '''Netlist'''.  
|-
| 05:10
| '''Netlist''' ka ai jingtip shaphang ka list jong ki components bad '''node'''s  ba pyndaitlang ia ki.
|-
| 05:16
|  Ngin peit ia ka jingpyndonkam jong ka netlist katba ngi dang iaid shakhmat ha kane ka jinghikai..
|-
| 05:20
|Ban pynmih netlist, leit ha ka panel ba hajrong duh. Click ha u '''netlist generation''' button.
|-
| 05:27
|Kane kan plie ia ka '''Netlist''' window.  
|-
| 05:31
|Kane ka window ka don ia u '''tab'''s  kaba ailad ia phi ban pynmih netlist ha kiba bunjait ki rukom..
|-
| 05:38
| Ia ka '''KiCad''' ngi pyndonkam da u '''Pcbnew''' tab.
|-
| 05:42
|  Buh ia ka '''Default format''' option checked/ti bad click ha u '''Netlist'''  button.
|-
| 05:48
| Buh jingmut ba ka saves ia ka netlist file da ka kyrteng 'project1.net'
|-
| 05:54
|Buh jingmut ruh ba ka netlist ba la pynmih, ka file kan saved da ka '.net' extension.
|-
| 06:00
|Click ha u '''Save''' button.
|-
| 06:02
|Peit ngan '''resize''' ia ka window.
|-
|06:04
|Click ha u '''Save''' button.
|-
|06:06
| '''Netlist''' file ka don ki jingtip shaphang ki components, ha ka circuit, ba donkam ha ka'''printed circuit board''' design.
|-
| 06:14
|   Ngin peit ia ka jingpyndonkam jong ka '''netlist''' file ha kawei pat ka jinghikai.
|-
| 06:20
| Leit sha ka '''File''' menu bad jied '''Save Whole Schematic Project''' ban save ia  ka schematic.
|-
| 06:27
| Leit sha ka '''File''' menu bad jied '''Quit''' ban khang ia ka 'EEschema' window.
|-
| 06:32
|Ha ka KiCad main window,
|-
| 06:34
| Leit sha ka '''File''' menu bad jied '''Quit'''. Kane kan khang ia ka '''KiCad main window'''. 

|-
| 06:40
| Ha kane ka jinghikai, ngi la tip kumno
|-
| 06:44
|Ban buh ia ki values jong ki components
|-
| 06:46
|Ban peit bad pynbeit ia ki '''error'''s ha ka circuit schematic
|-
| 06:50
||* Ban pynmih ia ka '''netlist''' jong ka circuit. 

|-
| 06:53
|   Peit ia ka video kaba don ha ka link harum.
|-
| 06:56
|Kan batai kyllum shaphang ka Spoken Tutorial project.
|-
| 06:58
| Lada phim don ia ka bandwith kaba biang, phi lah ban shu download bad peit.
|-
| 07:02
|   Ka Spoken Tutorial project team:
|-
| 07:04
|*Ka ai jinghikai (workshops) da kaba pyndonkam da ki spoken tutorials.
|-
| 07:07
|*Ka ai certificates ruh ia kito kiba pass ia ka onlain (online) test.
|-
| 07:10
|Ban tip bniah, sngewbha thoh sha ka:
contact at spoken hyphen tutorial dot org. 
|-
| 07:16
|''''Spoken Tutorial''' project ka dei shibynta jong ka '''Talk to a Teacher''' project.
|-
| 07:19
|La kyrshan ia kane da ka National Mission on Education lyngba ka ICT, MHRD, ka Sorkar India.
|-
| 07:25
|Shibun ki jingtip halor kane ka jingthmu ka don ha ka:
|-
| 07:28
|spoken hyphen tutorial dot org slash NMEICT hyphen Intro.
|-
| 07:34
|Ia kane ka jingthoh (script) la noh synniang da u George B. Warjri.
|-
| 07:39
|Nga dei u John from Meghalaya,  ngan pynkut noh. Khublei shibun.