OpenFOAM/C2/Installing-Running/English-timed
From Script | Spoken-Tutorial
| Time' | Narration |
| 00:01 | Hello and welcome to the spoken tutorial on Installing and running OpenFOAM and paraView. |
| 00:08 | In this tutorial I will show you
|
| 00:11 | how to install and run
|
| 00:15 | How to solve a lid driven cavity. |
| 00:19 | To record this tutorial I am using Linux Operating system Ubuntu version 10.04
|
| 00:26 | OpenFOAM version 2.1.0 ParaView version 3.12.0
|
| 00:33 | Note that OpenFOAM does not run on Windows platform.
|
| 00:37 | Also Note OpenFOAM v 2.1.0 is compatible with linux version 10.04 and above. |
| 00:45 | To practice this tutorial you should have some basic knowledge of Computational Fluid Dynamics.
|
| 00:52 | And Linux Commands. |
| 00:55 | Let me introduce you to OpenFOAM |
| 00:57 | It is an Open Source Computational Fluid Dynamics Software. |
| 01:02 | It contains a wide range of solvers for solving CFD problems of2dimensional
|
| 01:08 | as well as 3dimensionals. |
| 01:11 | Now let me introduce you to Paraview:
|
| 01:14 | It is used for visualizing the results obtained in OpenFOAM. |
| 01:19 | OpenFOAM and paraView can also be installed through Synaptic package manager |
| 01:24 | For Synaptic Package Manager go to System > Administration > Synaptic Package Manager |
| 01:33 | Type your password. |
| 01:41 | In the Search Box type OpenFOAM |
| 01:49 | you can see openfoam as well as paraView. |
| 01:54 | 'Mark both of them for installation |
| 02:06 | And then Click Apply to install |
| 02:12 | The Installation may take some time. |
| 02:15 | OpenFOAM and Paraview are installed. |
| 02:21 | For more details on Synaptic Package Manager
|
| 02:25 | please visit our website on this URL : http://www.spoken-tutorials.org
|
| 02:29 | Alternately you can also install OpenFOAM and paraView from openfoam website on this url: http://www.openfoam.com/download |
| 02:38 | Let me open up the browser |
| 02:45 | In the browser URL type : http://www.openfoam.com/downloadPress Enter |
| 03:10 | Scroll Down and go to Ubuntu Deb pack Let me zoom this |
| 03:23 | Go to Ubuntu deb pack installationClick on it |
| 03:33 | Let me zoom out. Scroll down and go to installation |
| 03:40 | From the first point of installation
|
| 03:43 | copy this command line and
|
| 03:46 | paste it in the terminal window
|
| 03:49 | To open up a the terminal window
|
| 03:52 | press Ctrl,Alt and t keys simultaneously on your keyboardor
|
| 03:59 | go to Application > Accessories > Terminal |
| 04:06 | Open up a terminal window
|
| 04:10 | Now copy this command line and paste it in the terminal window |
| 04:20 | Note that in place of 'lsb_release -cs'
|
| 04:26 | replace it with the name of Linux version that you are using |
| 04:30 | Switch back' to the browser.Above installation you can see different ubuntu version and the code names. |
| 04:40 | As i am using linux 10.04 |
| 04:45 | I will replace lbs _ release-cs with lucid |
| 04:53 | Open up the terminal window |
| 04:55 | I will replace this by lucid.Press enter |
| 05:04 | Note that Installation here is incomplete
|
| 05:08 | if you follow the steps in the
|
| 05:10 | sequence 1-2-3-4 you will be done through installing open foam and paraview . |
| 05:19 | I have already installed OpenFOAM And Paraview through Synaptic Pacakage Manage some while ago |
| 05:27 | Now we need to configure the installed software |
| 05:31 | To do this we need to edit the bash file |
| 05: 35 | Open a new command terminal.
|
| 05:39 | In the command terminal type : 'gedit ~/.bashrc'. Press Enter |
| 05:50 | This opens up the bash file, |
| 05:54 | Let me drag this to the capture area scroll down to the bottom of the bash file |
| 06:05 | Now switch back to the browser
|
| 06:09 | Scroll down and go to user configration |
| 06:13 | Look at the second point
|
| 06:15 | Copy this line.And paste it at the botttom of the bash file |
| 06:25 | Save it and Close the bash file. |
| 06:31 | Now we need to test the installed application |
| 06:35 | To do this open up a new command terminal terminal
|
| 06:40 | Let me drag this to the capture area |
| 06:49 | In the command terminal type 'icoFoam (Note that F here is capital) space -(dash) help
|
| 06:59 | Press enter |
| 07:03 | A usage message will appear. |
| 07:06 | You are now ready to start with OpenFoam |
| 07:10 | Now let me show you how to set up a working directory. |
| 07:14 | Create a project or a user directory by the name run |
| 07:21 | Open a new command terminal. Let me drag this to the capture area again |
| 07:36 | In the Command Terminal type : mkdir (space) -p (space) $FOAM_RUN
( Note That FOAM and RUN are in capital) Press Enter
|
| 07:55 | Copy the tutorial directory from openfoam distribution to run directory |
| 08:01 | By typing in the terminal cp (space) -r (space) $FOAM_TUTORIALS (space) $FOAM_RUN
|
| 08:18 | (' note that FOAM TUTORIAL' And RUN are capital) and Press Enter |
| 08:28 | Both the directories are now created. |
| 08:31 | To view the directories go to Places > Home Folder > OpenFOAM folder . |
| 08:40 | You can see ttt-210, Click on it |
| 08:44 | Run and tutorials |
| 08:48 | Close this
|
| 08:51 | let me switch back to the slides. |
| 08:56 | If some errors occurs during downloading OpenFOAM and Paraview
|
| 09:00 | from Synaptic Package Manager or Ubuntu Debian pack from the website
|
| 09:05 | then you can download and install Openfoam and paraview from the source pack installation |
| 09:11 | For source pack installationGo to the Download page of openfoam website
|
| 09:18 | Now let me zoom this |
| 09:21 | Scroll down and go toSource Pack Installation . Now click on this |
| 09:32 | Now scroll down and Go to Packs |
| 09:38 | Download these 2 tar files and save them. I have already downloaded and saved this 2 tar files |
| 09:48 | After this go to your home directory |
| 09:51 | To do this go to Places > home folder
|
| 09:56 | Let me drag this to the capture area |
| 10:00 | In your home directory create a folder by a name of your choice
|
| 10:09 | Let me put this as abc
|
| 10:15 | Copy the 2 downloaded files in the folder that you have just created. |
| 10:20 | To do this , copy these two tar file And paste it into the folder you just created |
| 10:37 | Unzip or Untar' these two files in the same folder.
Extract here, this make take a couple of minutes |
| 10:47 | After this open a new command terminal
|
| 10:51 | In this go to your home folder |
| 10:54 | type ls and press enter |
| 11:00 | Now go to the same folder in which you have untared the tar files |
| 11:06 | Now type cd ( space ) abc and press enter. |
| 11:13 | Now To view the contents inside abc type ls and press enter |
| 11:24 | Now go back to the Download page of OpenFOAM website for source pack installation |
| 11:32 | And Follow the steps given below for ubuntu distribution for OpenFOAM and Paraview |
| 11:39 | We need to compile OpenFOAM and Paraview here |
| 11:43 | It may take about 4 to 5 hours but this method always works .
|
| 11:50 | Let us see how to Solve a problem in OpenFOAM with an example |
| 11:56 | Let me take a “Lid Driven Cavity” as an example. |
| 11:59 | It is a 2D problem where the upper plate moves with a certain velocity and other three sides of the plate are fixed |
| 12:09 | The type of Solver I am using here is for incompressible flow Called as -icofoam |
| 12:17 | Now Open a new command terminal again
|
| 12:22 | i will drag this to the capture area |
| 12:31 | Type the path for the lid driven cavity problem |
| 12:35 | Note that this problem has already been set up in OpenFOAM |
| 12:41 | in the command terminal Type 'run'
|
| 12:45 | This will direct you to the run directory of OpenFOAM
|
| 12:53 | Now type cd (space) tutorial (Press Enter) |
| 12:59 | cd (space) incompressible (Press Enter)' |
| 13:07 | cd (space) icoFoam (Note that F here is capital) (Press Enter) |
| 13:15 | cd (space) cavity (Press Enter) |
| 13:20 | To view the content inside cavity type ls and press enter |
| 13;27 | You can see three files : 0,constant and system |
| 13:33 | Now we need to mesh the geometry |
| 13:3 | This can be done blockMesh utility of OpenFOAM |
| 13:40 | Open the terminal window type blockMesh
|
| 13:52 | Meshing has been done |
| 13:56 | Now run the solver 'icoFoam' by typing in the terminal icoFoam
|
| 14:09 | The iterations running can be seen in the terminal window |
| 14:13 | Here we notice we have completed the solving point. |
| 14:16 | To visualise these results let us open the paraview window. |
| 14:21 | To open paraView, type “paraFoam” in the terminal.
|
| 14:42 | This open ups the paraview window
|
| 14:45 | Now On the left hand side,
|
| 14:48 | In the object inspector menu,
|
| 14:50 | Click Apply to view the geometry |
| 14:54 | You can see the Lid Driven Cavity |
| 14:57 | Now To see the boundary conditions, scroll down the object inspector menu and go to Mesh Parts |
| 15:08 | Uncheck Internel Mesh and click Apply |
| 15:13 | The geometry disappear. |
| 15:15 | Now to view the moving and fixedwalls
|
| 15:19 | Check both the boxes and click Apply |
| 15:30 | Now uncheck the Moving wall and click Apply |
| 15:35 | You can now see three fixedwalls and the moving wall which just disappeared. |
| 15:44 | As we are done with running openfoam and paraview |
| 15:49 | In future we will come across more tutorials on solving and visualising the OpenFOAM result |
| 15:56 | Let me switch back to the slides |
| 16:01 | In this tutorial we learnt how to install:
|
| 16:05 | OpenFOAM and Paraview through Synaptic Package Manager and the website
solved a lid driven cavity. |
| 16:12 | As as Assignment, install OpenFOAM and Paraview |
| This brings us to the end of the tutorial | |
| 16:17 | Watch the video available at this URL: http://spoken-tutorial.org/What_is_a_Spoken_Tutorial |
| 16:21 | It summarizes the Spoken Tutorial project. |
| 16:24 | If you do not have good bandwidth, you can download and watch it. |
| 16:29 | The Spoken Tutorial Project Team |
| 16:31 | -Conducts workshops using spoken tutorials |
| 16:34 | -Gives certificates to those who pass an online test |
| 16:38 | -For more details, contact st tutemail@gmail.com |
| 16:45 | Spoken Tutorials is part of Talk to a Teacher project, |
| 16:49 | It is supported by the National Mission on Education through ICT, MHRD, Government of India. |
| 16:56 | More information on the same is available at thisURL link http://spoken-tutorial.org/NMEICT-Intro |
| 17:01 | This is Rahul Joshi from IIT BOMBAY signing off.
Thanks for joining. |
