Difference between revisions of "OpenFOAM/C2/Creating-simple-geometry-in-OpenFOAM/English"

From Script | Spoken-Tutorial
Jump to: navigation, search
Line 38: Line 38:
  
 
'''ParaView version 3.12.0 '''
 
'''ParaView version 3.12.0 '''
 +
 +
 +
 +
|-
 +
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| System Requirement
 +
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| The tutorials were recorded using the versions specified in previous slide
 +
 +
Subsequently the tutorials were edited to latest versions
 +
 +
To install latest system requirements go to Installation Sheet
  
  
Line 43: Line 53:
  
 
|-
 
|-
 +
 
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Only narration
 
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Only narration
  

Revision as of 12:27, 16 January 2019

Title of script: Creating simple geometry in OpenFOAM

Author: Rahul Ashok Joshi

Keywords: Video Tutorial,Computational Fluid Dynamics (CFD),OpenFOAM geometry


Visual Cue
Narration
Slide 1


Hello and welcome to the spoken tutorial on creating a simple geometry in OpenFOAM
Slide 2: Learning Objective In this tutorial I will show you

How to create a simple geometry

How to view geometry in paraview



Slide 3: System Requirement To record this tutorial

I am using Linux Operating system Ubuntu 10.04

OpenFOAM version 2.1.0

ParaView version 3.12.0


System Requirement The tutorials were recorded using the versions specified in previous slide

Subsequently the tutorials were edited to latest versions

To install latest system requirements go to Installation Sheet



Only narration


run>> tutorials >> incompressible>> icoFoam >>cavity

In CFD the Pre-processing part consists of creating geometry and meshing it.

Let us take the Lid driven cavity case of the previous tutorial as an example.

Recall the path for the earlier tutorial,

I have already opened the command terminal and entered

the path for lid driven cavity



In the command terminal


constant>>polyMesh

There are three folders 0,constant,and system

Geometry is inside the polymesh folder of constant

Terminal window: type cd constant In the command terminal type cd constant and press enter
Type ls Type ls and press enter


In this there is another folder called as polymesh

Type cd polyMesh type cd polymesh and press enter
Type ls type ls and press enter


This contains the geometry file called as blockMeshDict

Open the blockMeshDict file


type gedit blockMeshDict

Open the blockMeshDict file with any editor of your choice

In the terminal type gedit blockMeshDict and press enter

Minimise the blockMeshDict file

Slides Let me switch back to the slides
Hover over the diagram In openfoam the entire geometry is broken into blocks
Block vertex starts from 0 The blocks are numbered starting from 0 as shown in the figure
For 2D geometry enter a unit thickness cell in z axis Note that in OpenFOAM for creating a 2D geometry


you need to give a a unit cell thickness value in the z-axis.

Dimension of Cavity Lid driven cavity is of length 1 and height 1


minimise the slide

Create empty file

right click >create document>empty file

On your desktop create an empty file by


right click > create document > Empty file


and name it as blockMeshDict.

(Note that M and D here are capital)

Copy data from old blockMeshDict file


upto convertToMeters

Copy the data from the original lid driven cavity blockMeshDict file


to the new blockMeshDict file form line 0 to convertTometers.

In the blockMeshDict file


type vertices

In the file type vertices and press enter
Insert ( Put the open brackets and in the next line
Start with point 0


(0 0 0) and move to positive x axis


enter (1 0 0)

Start with 0 point, in brackets enter


(0 space 0 space 0) and press enter move towards the point 1 in positive x-axis


and enter (1 space 0 space 0) and press enter

Point 2 in the x-y plane move towards point 2 in positive x-y plane and enter (1 space 1 space 0) and press enter
Point 3 in y direction enter the 3 point in positive y axis

(0 space 1 space 0 ) and press enter

Point 4 in the front face

enter (1 0 1)

enter 4 point (1 space 0 space 1) on the front face and press enter
Points 5,6,7 with unit cell thickness in z axis Similarly enter the other points with one unit value in the positive z -axis



Inert ) and ; close the bracket and insert a semicolon after it
Type blocks and insert (


Lid driven cavity is a single block

Below vertices are the blocks Insert a Open bracket and press enter


Note that Lid driven cavity is taken as a single block

Enter the vertices of block


block (0 1 2 3 4 5 6 7 ) total 8 points

Enter the points for the blocks in a clockwise sense


in brackets enter ( 0 put space after each point and enter 1 2 3 4 5 6 7 )


For multiple blocks the points will be more.

Enter grid points in x, y and z axis After this enter the grid points in the x,y,and z directions
Enter the mesh/grid size

enter ( 30 30 1)

In brackets enter (30 space 30 space 1) ,you can modify the grid when needed
Grid point in z axis is kept as 1 Grid point in z-axis can be kept as one
Enter simpleGrading value ( 1 1 1 )


insert ) and ;

Leave a space and in brackets enter the simple grading for the mesh (1 space 1 space 1)

Close the bracket and insert a semicolon and press enter



Type edges Now type edges,as this is a simple geometry edges can be kept empty
Insert ( ); Insert open and closed bracket ,put a semicolon and press enter
Boundary conditions Below edges are the boundary conditions.
Here you need to enter the boundary name for the faces
Type boundary


insert (

Type boundary and in the next line and press enter


insert a open bracket and press enter


Let me switch back to slides

Slide : Geometry In the geometry the upper wall is moving and other three walls are fixed.
Front and back faces are kept as empty The front and back faces are termed as empty as this is a 2D problem
Open the current blockMeshDict file Open the New blockMeshDict file again
Boundary patch as moving wall In boundary put the name of the patch as moving wall
Insert { Insert a open curly bracket
Type of moving wall : wall


insert ;

Enter type for the moving wall as wall and


insert a semicolon

Let me switch to slides
Slide : Geometry Note that order the points in such a way that the thumb should be normal to that face
Clockwise curl of fingers And fingers make a clockwise curl as shown in the figure
Points should be entered matching the points inserted in vertices Also note that the points should match with the points inserted in vertices
Enter (3 7 6 2)


insert } and ;

Enter the face points as (3 space 7 space 6 space 2) as shown in the figure


Insert a curly brackets and put a semicolon.



Boundary patches for fixedWalls Similarly enter boundary condition and faces for the fixed wall
For front and back face enter type as empty Being a 2D problem the type of boundary


for front and back face can be kept empty

Insert Insert open-closed brackets and put a semicolon.
BlockMeshDict file is completed


We are done with creating the blockMeshDict file.

The complete blockMeshDict file is as shown here.

Close the original blockMeshDict file


The command terminal will not work till blockMeshDict is closed

Close the original blockMeshDict file


Note that command terminal will not work until blockMeshDict file is closed

Type cd .. twice type cd (dot) (dot) twice to return to the cavity folder Mesh the geometry
Meshing, type blockMesh in terminal type: blockMesh and press enter
Viewing the geometry type paraFoam View the geometry by typing in the command terminal paraFoam and press enter



In the object inspector menu click Apply On the left hand side click Apply on object inspector menu
Slide In this tutorial we learnt:

Creating a simple geometry in OpenFOAM

Viewed the geometry in Paraview

This brings us to the end of the tutorial

Slide : Assignment Assignment

Change the geometry parameters : Enter the grid points as (40 40 1) and (50 50 1).

View the geometry in paraview



Slide : About spoken tutorials Watch the video available at this URL: http://spoken-tutorial.org/What_is_a_Spoken_Tutorial


It summarizes the Spoken Tutorial project.

If you do not have good bandwidth, you can download and watch it.

Slide : about spoken tutorials The Spoken Tutorial Project Team

-Conducts workshops using spoken tutorials

-Gives certificates to those who pass an online test

-For more details, please write to us at contact@spoken-tutorial.org

Slide: Acknowledgement Spoken Tutorials are part of Talk to a Teacher project,

It is supported by the National Mission on Education through ICT, MHRD, Government of India.

More information on the same is available at the following URL link http://spoken-tutorial.org/NMEICT-Intro

About the contributor This is Rahul Joshi from IIT BOMBAY signing off.

Thanks for joining.



Contributors and Content Editors

Chandrika, DeepaVedartham, Nancyvarkey, Rahuljoshi