Osdag/C2/Performing-a-design-check-in-Osdag/English - Revision history

Madhurig at 09:46, 13 July 2023

2023-07-13T09:46:33Z

Madhurig at 06:40, 13 July 2023

2023-07-13T06:40:28Z

Show changes

Danish at 05:27, 7 July 2023

2023-07-07T05:27:15Z

Anandajitht at 10:06, 6 July 2023

2023-07-06T10:06:58Z

Danish at 04:35, 5 July 2023

2023-07-05T04:35:50Z

Danish at 04:31, 5 July 2023

2023-07-05T04:31:26Z

Anandajitht: Created page with " '''Title of the script:''' Performing a design check in Osdag '''Author''': Monika Soni (script), Anandajith TS (recording) '''Keywords:''' '''Video tutorial, Design check..."

2023-07-02T18:08:12Z

Created page with " '''Title of the script:''' Performing a design check in Osdag '''Author''': Monika Soni (script), Anandajith TS (recording) '''Keywords:''' '''Video tutorial, Design check..."

New page

'''Title of the script:''' Performing a design check in Osdag

'''Author''': Monika Soni (script), Anandajith TS (recording)

'''Keywords:''' '''Video tutorial, Design check, Database, Design Process, GUI, Osdag'''

{| border=1
|-
|| Visual Cue
|| Narration
|-
|| '''Slide: '''Title Slide
|| Welcome to the spoken tutorial on '''Performing a design check in Osdag.'''
|-
|| '''Slide: '''Learning Objectives
|| In this tutorial, we will learn how to,* Perform a '''design check'''
* Interpret the '''log messages'''
* Rectify '''unsafe''' designs using '''log messages'''
* Arrive at a '''safe '''design using '''log messages'''

|-
|| '''Slide: '''System Requirements
|| To record this tutorial, I am using:* '''Windows 11 Operating System''', and
* '''Osdag <span style="background-color:#ffffff;">v2021.02.a.a12f'''

|-
|| '''Slide:''' Pre-requisites

[https://osdag.fossee.in/ https://spoken-tutorial.org]
|| To follow this tutorial you should have,* '''Osdag''' installed on your system
* Basic knowledge of '''structural steel design'''

If not please access the prerequisite''' '''tutorials available on this website.
|-
|| Only narration
|| The user interface of '''Osdag''' for '''Ubuntu Linux''', and '''Windows '''is the same.

|-
|| Only narration
|| In this tutorial, We will solve a '''sample design example''' to demonstrate Scenario 2.
|-
|| '''Slide: Sample Design Example'''
|| * '''Design''' a '''Tension Member''' with a '''bolted end connection'''

* The member carries a '''factored axial force '''of '''500 kN'''

* Let’s perform a '''design check''' by adopting the given '''design '''specifications:
* '''Section:'''
** '''Profile: Back to Back Angles'''
** '''Connection Location: Long Leg'''
** '''Section Size: 120x120x12'''
** '''Material Grade: E 250 (Fe 410 W)A'''
** '''Length: 3200 mm'''

|-
|| '''Slide: '''Sample Design Example
|| '''End Connection:'''
** '''Connector: '''
***
**** '''Type: Bolted'''
**** '''Diameter: 16, 20'''
**** '''Bolt Type: Bearing Bolt'''
**** '''Grade: 4.8, 5.8, 6.8'''
** '''Gusset Plate: '''
***
**** '''Thickness: 16 mm'''

|-
|| Only narration
|| Let us switch to '''Osdag'''.
|-
|| Point to Input Dock
|| Now let’s start filling the '''Input Dock''' for our '''sample design'''.
|-
|| Click on the '''Section Profile drop-down menu'''
|| Click on the '''Section Profile''' '''drop-down''' '''menu'''.
|-
|| Select '''Back to Back Angles'''
|| Let’s select '''Back to Back Angles '''from the list of profiles.
|-
|| Click on the '''Conn_Location drop-down menu'''
|| Now, click the '''Conn_Location drop-down menu.'''
|-
|| Select '''Long Leg'''
|| Select '''Long Leg '''from the list.
|-
|| Cursor near Section Size.
|| Now, let us define the '''custom section''' size.
|-
|| Only narration
|| In this case we have to define a 120 x 120 x 12''' Angle section.'''
|-
|| Click on the '''Section Size drop- down''' '''menu '''and select '''Customized.'''
|| Click on the '''Section Size drop-down''' '''menu''', and

Select '''Customized'''.
|-
|| Point toward the '''Customized window'''.
|| The '''Customized window''' opens.
|-
|| Point toward the list of '''Selected sections '''in the '''Customized window'''.
|| Currently, all the '''sections '''are selected by default.
|-
|| Point to the four types of buttons in the window.
|| There are four types of '''buttons '''available for selection.
|-
|| Point toward the '''>> button'''
|| The first '''button '''selects all the sections at once.

It sends all the sections to the '''Selected '''list.
|-
|| Point toward the '''> button'''
|| The second '''button '''selects a single section and sends it to the '''Selected '''list.
|-
|| Point toward the '''< button'''
|| The third '''button '''deselects a single section from the '''Selected '''list.

It sends the section back to the '''Available '''list.
|-
|| Point toward the '''<< button'''
|| And, the fourth '''button '''deselects all the sections at once.

It sends all the sections back to the '''Available '''list.
|-
|| Click on the '''<< button'''
|| Click
on the fourth '''button''' to '''unselect '''all the '''sections '''at once.
|-
|| Point toward the list of '''Available sections '''in the '''Customized window'''.
|| We can select the desired section from the list of '''Available sections. '''
|-
|| '''Scroll '''down multiple times in the list of '''Available sections '''in the '''Customized window'''.
|| '''Scroll '''down the list of '''Available sections '''to locate '''120x120x12.'''
|-
|| Point toward '''120x120x12'''
|| We have located the desired '''section'''.
|-
|| Point to the section.
|| There are two ways to select a '''section:'''

We can either '''double-click''' on a particular '''section '''to select it right away.
|-
|| '''Click '''on '''120x120x12'''
|| Another way is to '''click '''on the desired '''section '''to choose it.
|-
|| Click on the '''> button'''
|| Then '''click '''the second '''button''' to add it to the list of '''Selected sections'''.
|-
|| Point toward '''120x120x12 '''in the '''Selected sections '''list
|| We can now see the '''section '''listed under the '''Selected sections '''on the right.
|-
|| '''Click '''on the '''Submit button'''
|| '''Click '''on the '''Submit button '''below to confirm and exit.
|-
|| Only narration
|| Let us now specify the '''Material Grade.'''
|-
|| Click on the '''Material drop-down menu '''and''' '''Select '''E 250 (Fe 410 W)A'''
|| Click on the '''Material drop-down menu''' and select '''E 250 (Fe 410 W)A'''.
|-
|| Type 3200
|| Enter the '''Length '''of the '''member '''as 3200 '''mm'''.
|-
|| '''Factored Loads'''.
|| Let us now define the '''Factored Loads'''.
|-
|| Type 500
|| Enter the value of '''Axial load '''as 500 '''kN'''.
|-
|| Only narration
|| Let us now give input for the '''connector'''.
|-
|| '''Click '''on the '''Diameter drop-down menu '''and

Select '''Customized.'''
|| '''Click '''on the '''Diameter drop-down menu''', and

Select '''Customized.'''
|-
|| Point to the '''Selected list.'''

Move using the '''<< double arrow '''button.
|| Here we see all the diameters in the '''Selected list'''.

Users can move the list to the '''Available''' section.
|-
|| Point toward the '''Available '''list
|| The standard '''Available '''bolt diameters are listed on the left.
|-
|| Only narration
|| Next, we will select the desired diameters from this list.
|-
|| Press '''Ctrl '''and click on 16 and 20
|| Press the '''Ctrl key '''and click on 16 and 20 to select multiple diameters from the list.
|-
|| Click on the '''> button'''
|| Then '''click '''on the second '''button''' to add them to the list of '''Selected diameters'''.
|-
|| '''Click '''on the '''Submit button'''
|| '''Click '''on the '''Submit button '''below to confirm and exit.
|-
|| Click on the''' Type drop-down menu '''and select '''Bearing Bolt '''
|| For the '''bolt Type, '''select''' Bearing Bolt.'''

|-
|| Click on the '''Property Class drop-down menu'''
|| '''Click '''on the '''Property Class drop-down menu''', and

Select '''Customized.'''
|-
|| Point toward the '''Selected '''list
|| The standard available bolt '''grades '''are listed on the right.
|-
|| Only narration
|| All the grades are selected by default in the '''Customized '''option.

Let us now deselect the unwanted '''grades '''from this list.
|-
|| Press '''Ctrl '''and click on 3.6, 4.6, 5.6, 8.8, 9.8, 10.9 and 12.9
|| Press the '''Ctrl key '''and click on 3.6, 4.6, 5.6, 8.8, 9.8, 10.9 and 12.9.
|-
|| Click on the '''< button'''
|| Now, '''click '''on the third '''button''' to send them back to the '''Available '''list.
|-
|| '''Click '''on the '''Submit button'''
|| '''Click '''on the '''Submit button '''below to confirm and exit.
|-
|| Only narration
|| Let us now define the plate thickness.
|-
|| Click on the '''Thickness drop-down menu'''
|| '''Click '''on the '''Thickness drop-down menu''', and

Select '''Customized.'''
|-
|| Point toward the '''Selected '''list
|| The standard available plate '''thicknesses '''are listed on the right.
|-
|| Only narration
|| Let us now de-select the unwanted '''thicknesses '''from this list.
|-
|| Click on the '''<< button'''
|| Click on the fourth button to de-select all the sections at once.
|-
|| '''Double-click''' on 16
|| Now''', Double-click''' on 16 to select it.
|-
|| Only narration
|| Double-clicking on a value from a list is a quick way to select or unselect it.
|-
|| '''Click '''on the '''Submit button'''
|| '''Click '''on the '''Submit button '''below to confirm and exit.
|-
|| Move the cursor on all the input fields from top to bottom
|| We have entered all the inputs in the '''Input Dock'''.

We are now ready to perform the '''design check'''.
|-
|| Click on the '''Design''' '''button'''
|| Click on the '''Design button '''at the bottom to start the '''design check'''.
|-
|| Only narration
|| In this case, '''Osdag '''will only perform '''design '''with the defined set of inputs.
|-
|| Point toward the '''log messages'''
|| The '''log message''' indicates that the '''design '''is '''unsafe'''.
|-
|| Point towards the '''Output Dock''' and the '''CAD window'''
|| The '''Output Dock''' and '''CAD window''' are inactive as the '''design '''is not successful.
|-
|| Only narration
|| Let us now rectify our '''design '''to arrive at a '''safe design'''.
|-
|| Point toward '''WARNING'''
|| Let us read the '''WARNING'''.
|-
|| Read the '''WARNING '''message
|| The '''WARNING '''message is '''‘The tension force (500.0 kN) exceeds the tension capacity (436.36 kN) with respect to the maximum available plate thickness of 16.0 mm.’'''
|-
|| Point to log messages
|| In this case, the '''design '''has failed is failing due to the '''plate thickness'''.

So, let us increase the '''plate thickness''' and '''re-design'''.
|-
|| Click on the '''Thickness drop-down menu'''
|| Again, '''click '''on the '''Thickness drop-down menu''', and

Select '''Customized.'''
|-
|| Only narration
|| Let us select a thicker plate this time, say 20 '''mm'''.
|-
|| '''Double-click''' on 20
|| '''Double-click''' on 20, and
|-
|| '''Click '''on the '''Submit button'''
|| '''Click '''on the '''Submit button '''below.
|-
|| Click on the '''Design''' '''button'''
|| Click on the '''Design button '''at the bottom to restart the '''design check'''.
|-
|| Point toward the '''log messages'''
|| The '''log message''' now indicates that the '''design '''is '''safe'''.
|-
|| Point towards the '''Output Dock''' and the '''CAD window'''
|| The '''Output Dock''' and '''CAD window''' become active as the '''design '''is now successful.
|-
|| Only narration
|| This brings us to the end of the tutorial.

Let us summarize.
|-
|| '''Slide: '''Summary
|| In this tutorial, we have* Learnt to perform a''' design check '''
* Interpreted the '''log messages'''
* Rectified '''unsafe design''' using '''log messages'''

* Arrived at a safe design using '''log messages'''

|-
|| '''Slide: '''Assignment
|| As an assignment, please do the following* Design a '''Tension Member''' with a '''welded '''end connection.
* The member carries a '''factored axial force '''of 500 '''kN.'''

|-
|| '''Slide: '''Assignment
||

Perform a '''design check''' by adopting the given design specifications:* '''Section:'''
** '''Profile: Angles'''
** '''Connection Location: Short Leg'''
** '''Section Size: 150x150x10'''
** '''Material Grade: E 300 (Fe 440)'''
** '''Length: 2560 mm'''

|-
|| '''Slide: '''Assignment
|| * '''Gusset Plate: '''
** '''Thickness: 16 mm'''

|-
|| '''Slide: '''About Spoken Tutorial Project
|| The video at the following link summarizes the Spoken Tutorial Project.

Please download and watch it.
|-
|| '''Slide:'''Spoken Tutorial Workshops
|| The Spoken Tutorial Project team conducts workshops and gives certificates.

For more details, please write to us.
|-
|| '''Slide:'''Answers for THIS Spoken Tutorial
|| Please post your timed queries in this forum.
|-
|| '''Slide: '''FOSSEE Forum
|| For any general or technical questions on Osdag, visit the FOSSEE forum and post your question.
|-
|| '''Slide: '''Sample Design Examples

[https://osdag.fossee.in/resources/sample-design https://osdag.fossee.in/resources/sample-design]
|| * The '''Osdag '''team at FOSSEE creates '''sample design examples''' for self-learning
* These examples can be practiced using the '''Osdag''' '''software'''
* For more details, please visit this link [https://osdag.fossee.in/resources/sample-design https://osdag.fossee.in/resources/sample-design]

|-
|| '''Slide: '''Acknowledgement
|| The '''Spoken''' '''Tutorial''' project is funded by the '''Ministry of Education''', Government of India.
|-
|| '''Slide: '''Thank you
|| This is '''Anandajith TS''', FOSSEE IIT Bombay signing off.

Thanks for joining.
|-
|}

@@ Line 5: / Line 5: @@
 '''Author''': Monika Soni (script), Anandajith TS (recording)
-'''Keywords:''' '''Video tutorial, Design check, Database, Design Process, GUI, Osdag'''
+'''Keywords:'''  osdag, optimum design, design check, member design, connection design, steel design optimisation, tension member, database, gui, video tutorial.
-−
@@ Line 13: / Line 12: @@
 {| border=1
 |-
-|| Visual Cue
+|| '''Visual Cue'''
-|| Narration
+|| '''Narration'''
 |-
-|| '''Slide: '''Title Slide
+|| '''Slide: '''
 || Welcome to the spoken tutorial on '''Performing a design check in Osdag'''.
 |-
-|| '''Slide: '''Learning Objectives
+|| '''Slide: '''
 || In this tutorial, we will learn how to,
 * Perform a '''design check'''
@@ Line 28: / Line 31: @@
 |-
-|| '''Slide: '''System Requirements
+|| '''Slide: '''
 || To record this tutorial, I am using:
 * '''Windows 11 Operating System''', and
@@ Line 35: / Line 41: @@
 |-
-|| '''Slide:''' Pre-requisites
+|| '''Slide:'''
 [https://osdag.fossee.in/ https://spoken-tutorial.org]
 || To follow this tutorial you should have,
 * '''Osdag''' installed on your system
 * Basic knowledge of '''structural steel design'''
@@ Line 47: / Line 56: @@
 |-
 || Only narration
-|| The user interface of '''Osdag''' for '''Ubuntu Linux''', and '''Windows '''is the same.
+|| The user interface of '''Osdag''' for '''Ubuntu Linux''', and '''Windows ''' is the same.
@@ Line 204: / Line 213: @@
 || The standard '''Available '''bolt diameters are listed on the left.
 |-
-|| Only narration
+||Point to the list
 || Next, we will select the desired diameters from the list.
 |-
-|| Press '''Ctrl '''and click on 16 and 20
+|| Press '''Ctrl '''and click on 16 and 20.
 || Press the '''Ctrl key '''and click on 16 and 20 to select multiple diameters from the list.
 |-
@@ Line 218: / Line 227: @@
 || Click on the''' Type drop-down menu ''' >> select '''Bearing Bolt '''.
 || For the '''bolt Type, select '''Bearing Bolt'''.
 |-
@@ Line 243: / Line 251: @@
 || '''Click '''on the '''Submit button '''below to confirm and exit.
 |-
-|| Only narration
+|| Cursor near Thickness drop down menu.
 || Let us now define the plate thickness.
 |-
@@ Line 329: / Line 337: @@
 Let us summarize.
 |-
-|| '''Slide: '''Summary
+|| '''Slide: '''
 || In this tutorial, we have
 * Learnt to perform a ''' design check '''
@@ Line 338: / Line 348: @@
 |-
-|| '''Slide: '''Assignment
+|| '''Slide: '''
 || As an assignment, please do the following
 * Design a '''Tension Member''' with a '''welded '''end connection.
@@ Line 345: / Line 357: @@
 |-
-|| '''Slide: '''Assignment
+|| '''Slide: '''
 || Perform a '''design check''' by adopting the given design specifications:
 * '''Section:'''
@@ Line 356: / Line 370: @@
 |-
-|| '''Slide: '''Assignment
+|| '''Slide: '''
 ||
 * '''Gusset Plate: '''
@@ Line 363: / Line 380: @@
 |-
-|| '''Slide: '''About Spoken Tutorial Project
+|| '''Slide: '''
 || The video at the following link summarizes the Spoken Tutorial Project.
@@ Line 369: / Line 388: @@
 Please download and watch it.
 |-
-|| '''Slide:'''Spoken Tutorial Workshops
+|| '''Slide:'''
 || The Spoken Tutorial Project team conducts workshops and gives certificates.
@@ Line 375: / Line 396: @@
 For more details, please write to us.
 |-
-|| '''Slide:'''Answers for THIS Spoken Tutorial
+|| '''Slide:'''
 || Please post your timed queries in this forum.
 |-
-|| '''Slide: '''FOSSEE Forum
+|| '''Slide: '''
 || For any general or technical questions on Osdag, visit the FOSSEE forum and post your question.
 |-
-|| '''Slide: '''Sample Design Examples
+|| '''Slide: '''
@@ Line 394: / Line 422: @@
 |-
-|| '''Slide: '''Acknowledgement
+|| '''Slide: '''
 || The '''Spoken''' '''Tutorial''' project is funded by the '''Ministry of Education''', Government of India.
 |-
-|| '''Slide: '''Thank you
+|| '''Slide: '''
 || This is '''Anandajith TS''', FOSSEE IIT Bombay signing off.

@@ Line 400: / Line 400: @@
 [https://osdag.fossee.in/resources/sample-design https://osdag.fossee.in/resources/sample-design]
-|| * The '''Osdag '''team at FOSSEE creates '''sample design examples''' for self-learning
+||
 * These examples can be practiced using the '''Osdag''' '''software'''
 * For more details, please visit this link [https://osdag.fossee.in/resources/sample-design https://osdag.fossee.in/resources/sample-design]

@@ Line 83: / Line 83: @@
 *'''End Connection:'''
 ** '''Connector: '''
-**** '''Type: Bolted'''
+*** '''Type: Bolted'''
-**** '''Diameter: 16, 20'''
+*** '''Diameter: 16, 20'''
-**** '''Bolt Type: Bearing Bolt'''
+*** '''Bolt Type: Bearing Bolt'''
-**** '''Grade: 4.8, 5.8, 6.8'''
+*** '''Grade: 4.8, 5.8, 6.8'''
-−
 ** '''Gusset Plate: '''
-**** '''Thickness: 16 mm'''
+*** '''Thickness: 16 mm'''
@@ Line 342: / Line 341: @@
 |-
 || '''Slide: '''Summary
-|| In this tutorial, we have* Learnt to perform a''' design check '''
+|| In this tutorial, we have
 * Interpreted the '''log messages'''
 * Rectified '''unsafe design''' using '''log messages'''
@@ Line 359: / Line 359: @@
 ||
-Perform a '''design check''' by adopting the given design specifications:* '''Section:'''
+Perform a '''design check''' by adopting the given design specifications:
 ** '''Profile: Angles'''
 ** '''Connection Location: Short Leg'''
@@ Line 369: / Line 370: @@
 |-
 || '''Slide: '''Assignment
-|| * '''Gusset Plate: '''
+||
 ** '''Thickness: 16 mm'''

@@ Line 63: / Line 63: @@
 |-
 || '''Slide: Sample Design Example'''
-|| * '''Design''' a '''Tension Member''' with a '''bolted end connection'''
+||
 * Design a '''Tension Member''' with a '''bolted end connection'''
-−
 * The member carries a '''factored axial force '''of '''500 kN'''
 * '''Section:'''
 ** '''Profile: Back to Back Angles'''
@@ Line 82: / Line 80: @@
 |-
 || '''Slide: '''Sample Design Example
-||  '''End Connection:'''
+||
 ** '''Connector: '''
 **** '''Type: Bolted'''
 **** '''Diameter: 16, 20'''
 **** '''Bolt Type: Bearing Bolt'''
 **** '''Grade: 4.8, 5.8, 6.8'''
 ** '''Gusset Plate: '''
 **** '''Thickness: 16 mm'''
@@ Line 152: / Line 150: @@
 |-
 || Click on the '''<< button'''
-|| Click
+|| Click on the fourth '''button''' to '''unselect '''all the '''sections '''at once.
- on the fourth '''button''' to '''unselect '''all the '''sections '''at once.
 |-
 || Point toward the list of '''Available sections '''in the '''Customized window'''.

@@ Line 20: / Line 20: @@
 |-
 || '''Slide: '''Learning Objectives
-|| In this tutorial, we will learn how to,* Perform a '''design check'''
+|| In this tutorial, we will learn how to,
 * Interpret the '''log messages'''
 * Rectify '''unsafe''' designs using '''log messages'''
@@ Line 28: / Line 29: @@
 |-
 || '''Slide: '''System Requirements
-|| To record this tutorial, I am using:* '''Windows 11 Operating System''', and
+|| To record this tutorial, I am using:
-* '''Osdag <span style="background-color:#ffffff;">v2021.02.a.a12f'''
+* '''Windows 11 Operating System''', and
@@ Line 41: / Line 43: @@
 [https://osdag.fossee.in/ https://spoken-tutorial.org]
-|| To follow this tutorial you should have,* '''Osdag''' installed on your system
+|| To follow this tutorial you should have,
 * Basic knowledge of '''structural steel design'''