OpenFOAM/C3/Exporting-geometry-from-Salome-to-OpenFOAM/English-timed - Revision history

PoojaMoolya at 06:12, 24 March 2017

2017-03-24T06:12:39Z

PoojaMoolya at 10:15, 10 March 2017

2017-03-10T10:15:49Z

PoojaMoolya at 10:13, 10 March 2017

2017-03-10T10:13:45Z

PoojaMoolya at 10:13, 10 March 2017

2017-03-10T10:13:22Z

Sandhya.np14 at 10:48, 4 July 2016

2016-07-04T10:48:30Z

Sandhya.np14 at 10:28, 4 July 2016

2016-07-04T10:28:53Z

Sandhya.np14 at 06:42, 4 July 2016

2016-07-04T06:42:50Z

Sandhya.np14 at 06:30, 4 July 2016

2016-07-04T06:30:53Z

Sandhya.np14 at 06:27, 4 July 2016

2016-07-04T06:27:28Z

Show changes

Pratik kamble at 09:12, 1 December 2015

2015-12-01T09:12:38Z

Show changes

@@ Line 9: / Line 9: @@
 |-
 | 00:09
-|In this tutorial, we will see :
+|In this tutorial, we will see :  To group the meshed geometry parts in '''Salome'''
   To group the meshed geometry parts in '''Salome'''
-  To '''export''' the '''geometry '''to '''OpenFOAM'''
+To '''export''' the '''geometry '''to '''OpenFOAM'''.  To create a '''case directory''' for '''simulation''' and
   To create a '''case directory''' for '''simulation''' and
- To view the '''geometry''' in '''ParaView.'''
+To view the '''geometry''' in '''ParaView.'''
 |-
@@ Line 33: / Line 33: @@
 |-
-|01:12
+| 01:12
 | Open the''' 'Mesh' tree''' from the ''' object Browser.'''
@@ Line 251: / Line 251: @@
 |09:38
 | '''Volume '''inside the '''surface '''is automatically grouped as '''internal mesh.'''
-  How to''' export '''the '''geometry '''to OpenFOAM
+In this tutorial, we have learned: How to''' group''' the meshed geometry parts in '''Salome'''
-  How to create a '''case directory''' for '''simulation'''
+How to''' export '''the '''geometry '''to OpenFOAM. How to create a '''case directory''' for '''simulation'''
-  And, to view the '''geometry''' in '''ParaView.'''
+And, to view the '''geometry''' in '''ParaView.'''
 |-
@@ Line 267: / Line 265: @@
 |-
 | 10:14
-| The video is available at the following URL:
+| The video is available at the following URL:http://spoken-tutorial.org/What_is_a_Spoken_Tutorial.
 http://spoken-tutorial.org/What_is_a_Spoken_Tutorial.
 It summarizes the Spoken Tutorial project. If you do not have good bandwidth, you can download and watch it.
 |-
 |10:24
-| The Spoken Tutorial Project team:
+| The Spoken Tutorial Project team: Conducts workshops using spoken tutorials.
-  Conducts workshops using spoken tutorials.
-  Gives certificates to those who pass an online test.
+Gives certificates to those who pass an online test.For more details, please write to:'''contact@spoken-tutorial.org'''
 For more details, please write to:
 '''contact@spoken-tutorial.org'''
 |-
 | 10:40
-| '''Spoken Tutorial''' project is a part of the '''Talk to a Teacher''' project. It is supported by the National Mission on Education through ICT, MHRD, Government of India. More information on this mission is available at:
+| '''Spoken Tutorial''' project is a part of the '''Talk to a Teacher''' project. It is supported by the National Mission on Education through ICT, MHRD, Government of India. More information on this mission is available at: http://spoken-tutorial.org/NMEICT-Intro
 http://spoken-tutorial.org/NMEICT-Intro
 |-

@@ Line 17: / Line 17: @@
 |-
 | 00:26
-| To record this tutorial, I am using:
+| To record this tutorial, I am using: '''Linux operating system, Ubuntu''' version 12.10 '''OpenFOAM''' version 2.1.1 '''ParaView''' version 3.12.0
-  '''Linux operating system, Ubuntu''' version 12.10
+'''Salome''' version 6.6.0
-  '''OpenFOAM''' version 2.1.1
-  '''ParaView''' version 3.12.0
-  '''Salome''' version 6.6.0
 |-

@@ Line 9: / Line 9: @@
 |-
 | 00:09
-| In this tutorial, we will see :
+|In this tutorial, we will see :
-  To group the meshed geometry parts in '''Salome'''
+ To group the meshed geometry parts in '''Salome'''
-  To '''export''' the '''geometry '''to '''OpenFOAM'''
+ To '''export''' the '''geometry '''to '''OpenFOAM'''
-  To create a '''case directory''' for '''simulation''' and
+ To create a '''case directory''' for '''simulation''' and
-  To view the '''geometry''' in '''ParaView.'''
+ To view the '''geometry''' in '''ParaView.'''
 |-

@@ Line 10: / Line 10: @@
 | 00:09
 | In this tutorial, we will see :
-* To group the meshed geometry parts in '''Salome'''
+  To group the meshed geometry parts in '''Salome'''
-* To '''export''' the '''geometry '''to '''OpenFOAM'''
+  To '''export''' the '''geometry '''to '''OpenFOAM'''
-* To create a '''case directory''' for '''simulation''' and
+  To create a '''case directory''' for '''simulation''' and
-* To view the '''geometry''' in '''ParaView.'''
+  To view the '''geometry''' in '''ParaView.'''
 |-
 | 00:26
 | To record this tutorial, I am using:
-* '''Linux operating system, Ubuntu''' version 12.10
+  '''Linux operating system, Ubuntu''' version 12.10
-* '''OpenFOAM''' version 2.1.1
+  '''OpenFOAM''' version 2.1.1
-* '''ParaView''' version 3.12.0
+  '''ParaView''' version 3.12.0
-* '''Salome''' version 6.6.0
+  '''Salome''' version 6.6.0
 |-
@@ Line 65: / Line 65: @@
 |-
 | 02:07
-| Open the''' 'Geometry' tree '''in the''' Object Browser'''. Open the''' pipe_1 tree''' and  select the''' inlet''' group in the '''geometry tree''' that we had created in the previous tutorial.
+| Open the''' 'Geometry' tree '''in the''' Object Browser'''. Open the''' pipe_1 tree''' and  select the''' inlet''' group in the '''geometry tree''' that  we had created in the previous tutorial.
 |-
@@ Line 254: / Line 254: @@
 |09:38
 | '''Volume '''inside the '''surface '''is automatically grouped as '''internal mesh.'''
-In this tutorial, we have learned:
+  In this tutorial, we have learned:
-* How to''' group''' the meshed geometry parts in '''Salome'''
+  How to''' group''' the meshed geometry parts in '''Salome'''
-* How to''' export '''the '''geometry '''to OpenFOAM
+  How to''' export '''the '''geometry '''to OpenFOAM
-* How to create a '''case directory''' for '''simulation'''
+  How to create a '''case directory''' for '''simulation'''
-* And, to view the '''geometry''' in '''ParaView.'''
+  And, to view the '''geometry''' in '''ParaView.'''
 |-
@@ Line 277: / Line 277: @@
 |10:24
 | The Spoken Tutorial Project team:
-* Conducts workshops using spoken tutorials.
+  Conducts workshops using spoken tutorials.
-* Gives certificates to those who pass an online test.
+  Gives certificates to those who pass an online test.
 For more details, please write to:
 '''contact@spoken-tutorial.org'''

@@ Line 213: / Line 213: @@
 |-
 | 08:02
-| Open the''' ''p'' file''' .Make sure that you give '''boundary patches''' for '''''inlet, outlet''''' and '''''walls''''' as we had created in '''''Salome.'''''
+| Open the 'p' file. Make sure that you give '''boundary patches''' for '''inlet, outlet''' and '''walls''' as we had created in '''Salome.'''
 |-
 | 08:15
-| '''Erase'' movingWall ''and type'' inlet.''''' '''Erase'' fixedWall ''and type'' outlet.'''''
+| Erase '''movingWall''' and type "inlet". Erase '''fixedWalls''' and type "outlet".
 |-
 | 08:25
-| '''Erase'' frontAndBack'' and type ''walls.''''' '''Save '''the''' file '''and '''Close '''the''' file.'''
+| Erase '''frontAndBack''' and type "walls". '''Save '''the file and '''Close '''the file.
 |-
 | 08:34
-| Similarly,Make changes in'' '''U'' file.''' For appropriate '''boundary conditions,'''you can refer to the '''tutorial''' on '''''Hagen-Poiseuille flow.'''''
+| Similarly, make changes in 'U' file. For appropriate '''boundary conditions,''' you can refer to the tutorial on '''Hagen-Poiseuille flow.'''
 |-
@@ Line 233: / Line 233: @@
 |-
 | 08:51
-| You may also make the changes in '''''transportProperties''''' and '''''ControlDict''''' files by refering to the '''tutorial '''on '''''Hagen-Poiseuille flow.'''''
+| You may also make the changes in '''transportProperties''' and '''ControlDict''' files by referring to the tutorial on '''Hagen-Poiseuille flow.'''
 |-
 | 09:00
-| Let's ''close the''' Home Folder.'''''
+| Let's close the''' Home''' folder.
 |-
 | 09:03
-| Now, '''go to terminal.'''Type''' ''paraFoam.''''' This will open '''''ParaView'''''. Click on '''''Apply '''''in the '''''Object Inspector Menu.'''''
+| Now, go to terminal. Type ''' paraFoam.''' This will open '''ParaView'''. Click on '''Apply''' in the '''Object Inspector''' menu.
 |-
 | 09:16
-| In the '''drop down menu '''click on '''''Surface with Edges.''''' Lets have a '''closer look''' by''' zooming in.'''
+| In the drop-down menu. click on '''Surface with Edges.''' Let's have a closer look by zooming in.
 |-
 | 09:28
-| We see''' hexahedral mesh.''' We also see the '''groups''' have been created as we had named it in '''''Salome- Inlet outlet and walls.'''''
+| We see''' hexahedral mesh.''' We also see the '''groups''' have been created as we had named it in '''Salome- Inlet outlet''' and '''walls'''.
 |-
 |09:38
-| '''Volume '''inside the '''surface '''is automatically grouped as '''''internal mesh.''''' In this '''tutorial''' we have learned:
+| '''Volume '''inside the '''surface '''is automatically grouped as '''internal mesh.'''
-How to''' group''' the '''meshed geometry parts '''in '''''Salome.'''''
+In this tutorial, we have learned:
-How to''' export '''the '''geometry '''to '''''OpenFOAM.'''''
+* How to''' export '''the '''geometry '''to OpenFOAM
-How to create a '''case directory''' for '''simulation.'''
+* How to create a '''case directory''' for '''simulation'''
-And to view the '''geometry''' in '''''ParaView.'''''
+* And, to view the '''geometry''' in '''ParaView.'''
 |-
 |10:00
 | For Assignment,'''Run '''the simulation by making appropriate changes in the files as described.
-'''Export '''the '''geometries''' that you have created on your own.And '''run''' the '''simulations''' on those '''geometries.'''
+'''Export '''the '''geometries''' that you have created on your own. And, '''run''' the '''simulations''' on those '''geometries.'''
 |-
 | 10:14
-| The video is available at the following URL:http://spoken-tutorial.org/What_is_a_Spoken_Tutorial.It summarizes the Spoken Tutorial project.If you do not have good bandwidth, you can download and watch it.
+| The video is available at the following URL:
 |-
 |10:24
-| The Spoken Tutorial Project Team Conducts workshops using spoken tutorials Gives certificates to those who pass an online test For more details, contact@spoken-tutorial.org
+| The Spoken Tutorial Project team:
 |-
 | 10:40
-| Spoken Tutorials are part of Talk to a Teacher project, It is supported by the National Mission on Education through ICT, MHRD, Government of India. This project is coordinated by http://spoken-tutorial.More information on this mission is available at, http://spoken-tutorial.org/NMEICT-Intro
+| '''Spoken Tutorial''' project is a part of the '''Talk to a Teacher''' project. It is supported by the National Mission on Education through ICT, MHRD, Government of India. More information on this mission is available at:
 |-
 | 10:58
-| I am Saurabh Sawant, from IIT Bombay, Thank you.
+| I am Saurabh Sawant, from '''IIT Bombay'''. Thank you.
 |}

@@ Line 101: / Line 101: @@
 |-
 | 03:31
-| Now, in the '''mesh''' menu at the top, click on '''Cut groups.''' Select the '''Main object''' as '''Group_1'''. Select  '''Tool object''' as '''inlet.'''
+| Now, in the '''mesh''' menu at the top, click on '''Cut groups.''' Select the '''Main object''' as '''Group_1'''. Select the '''Tool object''' as '''inlet.'''
 |-
@@ Line 117: / Line 117: @@
 |-
 | 04:10
-| Right-click on the '''Group_1''' and '''delete''' this group as we do not want to see it in '''OpenFOAM.'''
+| Right-click on '''Group_1''' and '''delete''' this group as we do not want to see it in '''OpenFOAM.'''
 |-
@@ Line 125: / Line 125: @@
 |-
 | 04:24
-| Now, right click on '''mesh_1.''' Go to '''Export >> Unv File.'''
+| Now, right-click on '''mesh_1.''' Go to '''Export >> Unv File.'''
 |-
@@ Line 141: / Line 141: @@
 |-
 | 05:01
-|To perform simulation on this''' geometry '''in '''''OpenFOAM''''' using '''''icoFoam ''solver,''' Go to the '''''icoFoam ''folder''' in '''''OpenFOAM.'''''
+|To perform simulation on this''' geometry '''in OpenFOAM using '''icoFoam solver,''' go to the '''icoFoam''' folder in OpenFOAM.
 |-
 | 05:10
-| For the location of this '''folder''', go to the''' tutorial''' on '''''lid driven cavity.'''''
+| For the location of this folder, go to the tutorial on '''lid driven cavity.'''
 |-
 | 05:15
-| '''Copy''' and '''Paste ''bentpipe'' folder ''' on the''' desktop''' in this''''' icoFoam'' folder.'''
+| '''Copy''' and '''Paste''' the "bentpipe" folder on the desktop, in this ''' icoFoam''' folder.
 |-
 | 05:22
-| Also, '''copy''' the '''''system''''' '''folder''' from '''''cavity'' folder''' to this '''''bentpipe ''folder.'''
+| Also, copy the '''system''' folder from the '''cavity''' folder to this '''bentpipe''' folder.
 |-
 | 05:32
-| Now, go inside the'' '''bentpipe ''folder '''throgh '''command terminal.'''I am inside the''' ''bentpipe'' folder.'''
+| Now, go inside this '''bentpipe''' folder throgh '''command terminal.''' I am inside the''' bentpipe''' folder.
 |-
 | 05:41
-| Type '''''ls''''' and press '''''Enter'''''. We can see the '''''system'' folder''' and the '''''bentpipe.unv ''file''.'''''
+| Type "ls" and press '''Enter'''. We  see the '''system'''folder and the '''bentpipe.unv''' file.
 |-
 | 05:49
-| Now, type '''''ideasUnvToFoam bentpipe.''(dot)''unv, '''''Note that '''U, T '''and '''F''' are''' capital.''' Press '''Enter.'''
+| Now, type: '''ideasUnvToFoam space bentpipe dot unv'''. Note that '''U, T '''and '''F''' are capital. Press '''Enter.'''
 |-
 | 06:11
-|Now '''''Type ls.''''' We see ''' ''constant'' folder '''has been created. '''''Type cd (space) Constant.'''''
+|Now, type "ls". We see '''constant''' folder has been created. Type '''cd (space) Constant.'''
 |-
 | 06:23
-| Type '''''cd ''(space) ''polyMesh.''''' Type''' ''ls''. '''Press''' ''Enter.'''''
+| Type '''cd (space) polyMesh.''' Type "ls". Press '''Enter.'''
 |-
 | 06:31
-| We see'''geometry files '''have been created.Come out of the '''''polyMesh''''' '''folder. '''
+| We see '''geometry''' files have been created. Come out of the '''polyMesh''' folder.
 |-
 | 06:38
-| Come out of the '''''constant''''' '''folder.'''
+| Come out of the '''constant''' folder.
 |-
 | 06:42
-| Now, to convert the '''geometry scale '''to '''centimeters''', type'''''transformPoints (space) -scale'(0.01 0.01 0.01)' '''''and press''''' Enter.'''''The '''Geometry '''has been converted to''' centimeters.'''
+| Now, to convert the '''geometry scale '''to centimeters, type:  '''transformPoints (space) -scale space '(0.01 space 0.01 space 0.01)' '''and press '''Enter.''' The '''Geometry '''has been converted to centimeters.
 |-
 | 07:17
-| '''Minimize''' the '''terminal.'''Go inside the''' ''bentpipe'' folder.'''
+| Minimize the terminal. Go inside the '''bentpipe''' folder.
 |-
 | 07:23
-| Go inside''' ''constant ''folder.''' We see that the''' ''transportProperties ''file '''is not there.
+| Go inside the '''constant folder.''' We see that the''' transportProperties''' file is not there.
 |-
 | 07:30
-| Copy the '''''transportProperties ''file '''from the '''''cavity'' folder''' and '''save '''it inside the '''constant''' folder.'''
+| Copy the '''transportProperties''' file from the '''cavity''' folder and '''save '''it inside the '''constant''' folder.
 |-
 | 07:37
-|I have copied the transport property file Now, come out of the '''''constant'' folder.'''
+|I have copied the '''transport Properties''' file. Now, come out of the '''constant''' folder.
 |-
 | 07:44
-| We need the '''''0 ''(zero)'' ''folder''' having '''''P''' ''and '''''U'' files.'''Copy the '''''0 ''(zero) folder '''from the '''''cavity ''folder.'''
+| We need the '''0 (zero)''' folder having 'P' and 'U' files.'''Copy''' the '0 '(zero) folder from the '''cavity''' folder.
 |-
 | 07:55
-| I have copied the''' ''0 ''(zero) folder.''' Go inside the '''''0 ''(zero) folder.'''
+| I have copied the'0' (zero) folder. Go inside the '0' (zero) folder.
 |-

@@ Line 85: / Line 85: @@
 |-
 | 02:53
-| Select '''Element Type''' as '''Face ''' and the '''Group Type''' as''' Group on filter.'''
+| Select the '''Element Type''' as '''Face ''' and the '''Group Type''' as''' Group on filter.'''
 |-
 | 03:00
-| Click on''' Set filter.''' Click on the '''Add''' button. In the drop-down option below '''criterion''' menu, select '''Free Faces'''.  Click on '''Apply and Close.'''
+| Click on''' Set filter.''' Click on the '''Add''' button. In the drop-down option below '''Criterion''' menu, select '''Free Faces'''.  Click on '''Apply and Close.'''
 |-
@@ Line 101: / Line 101: @@
 |-
 | 03:31
-| Now, in the '''mesh''' menu at the top, click on '''Cut groups.''' Select the '''main object''' as '''Group_1'''. Select  '''tool object''' as '''inlet.'''
+| Now, in the '''mesh''' menu at the top, click on '''Cut groups.''' Select the '''Main object''' as '''Group_1'''. Select  '''Tool object''' as '''inlet.'''
 |-
 | 03:45
-| Hold the''' shift key''' on your keyboard and also select the '''tool object '''as '''outlet.'''
+| Hold the''' shift key''' on your keyboard and also select the '''Tool object '''as '''outlet.'''
 |-
 | 03:54
-|Type the '''result name''' as '''walls.'''
+|Type the '''Result name''' as '''walls.'''
 |-
 | 03:58
-| You can select the '''color''' as purple. click on '''''Apply and Close.''''' ''''We see '''walls group''' has been created.
+| You can select the '''color''' as purple. click on '''Apply and Close.''' We see '''walls''' group has been created.
 |-
 | 04:10
-| Right click on the '''''Group_1'' '''and '''delete''' this '''group''' as we do not want to see it in '''''OpenFOAM.'''''
+| Right-click on the '''Group_1''' and '''delete''' this group as we do not want to see it in '''OpenFOAM.'''
 |-
 | 04:20
-|'''Save '''the work by clicking on''' ''save document ''option.'''
+|'''Save '''the work by clicking on''' save document''' option.
 |-
 | 04:24
-| Now right click on'' '''mesh_1. '''''Go to '''''Export>> Unv File.'''''
+| Now, right click on '''mesh_1.''' Go to '''Export >> Unv File.'''
 |-
 | 04:33
-| Name the file as '''''bentpipe'''.'' I am '''saving''' this '''file''' on the '''Desktop.''' Close salome We see''' ''bentpipe.unv'' file''' on the''' desktop.'''
+| Name the file as '''bentpipe'''. I am saving this file on the Desktop. Close '''Salome'''. We see''' bentpipe.unv''' file on the desktop.
 |-
 | 04:50
-| Create a''' folder '''named''' ''bentpipe '''''on the '''''desktop.'''''
+| Create a folder named "bentpipe" on the desktop.
 |-
 | 04:55
-| Now, '''move'' bentpipe.unv ''file '''to this''' folder.'''
+| Now, move "bentpipe.unv" file to this folder.
 |-

@@ Line 57: / Line 57: @@
 |-
 | 01:48
-| Select the '''Element Type '''as '''Face.''' Select the '''''Group type''' as '''Group on Geometry'''.
+| Select the '''Element Type '''as '''Face.''' Select the '''Group type''' as '''Group on Geometry'''.
 |-
@@ Line 81: / Line 81: @@
 |-
 | 02:44
-| Now, to create the''' group''' of the whole outer surface, right-click on '''mesh_1''' >> Create group .'''
+| Now, to create the''' group''' of the whole outer surface, right-click on '''mesh_1 >> Create group .'''
 |-