PoojaMoolya at 10:13, 13 April 2017

2017-04-13T10:13:17Z

George 030390: Created page with "{| border = 1 |'''Time''' |'''Narration''' |- | 00:01 | Paralok baieid, |- | 00:02 | Ngi pdiang sngewbha ia phi sha ka '''spoken tutorial''' halor ka '''Designing printed..."

2016-12-29T10:36:23Z

Created page with "{| border = 1 |'''Time''' |'''Narration''' |- | 00:01 | Paralok baieid, |- | 00:02 | Ngi pdiang sngewbha ia phi sha ka '''spoken tutorial''' halor ka '''Designing printed..."

New page

{| border = 1

|'''Time'''
|'''Narration'''

|-
| 00:01
| Paralok baieid,
|-
| 00:02
| Ngi pdiang sngewbha ia phi sha ka '''spoken tutorial''' halor ka '''Designing printed circuit board da ka KiCad'''.
|-
| 00:07'''
| Ha kane ka jinghikai, ngin pule shaphang
|-
| 00:09
|Kumno ban design '''printed circuit board''' ha ka '''KiCad'''.
|-
| 00:12
|Hangne ngi pyndonkam da ka '''Ubuntu 12.04''' kum ka operating system
|-
| 00:16
|Bad da ka '''KiCad''' version: '''2011 hyphen 05 hyphen 25'” na ka bynta kane ka jingbatai.
|-
| 00:25
|Khyndiat ka jingtip shaphang ka electronic circuit ka long kaba donkam ha kane ka jingbatai
|-
| 00:30
|U nongpyndonkam u hap ban tip ruh:* kumno ban design '''circuit schematic''' ha ka '''KiCad'''
|-
|00:35
|Ban leh '''electric rule check'''
|-
|00:37
|Ban leh '''netlist generation'''
|-
| 00:39
|Ban leh mapping ia ki components jong ka '''footprints'''.
|-
| 00:43
|Na ka bynta ki jinghikai kiba iadei, sngewbha leit sha ka:
http://spoken hyphen tutorial.org

|-
| 00:50
|Ban sdang ia ka KiCad -

|-
| 00:52

|Leit hajrong sha kadiang duh jong ka Ubuntu desktop screen.
|-
| 00:56
| Click ha u icon ba nyngkong kaba mut '''Dash home'''.
|-
|01:01
|Ha ka search bar (jaka wad), thoh "KiCad" bad nion '''Enter'''.
|-
| 01:09
|Kane kan plie ia ka '''KiCad main window'''.
|-
| 01:12
|Ban plie ia ka 'EEschema', leit sha ka panel ba hajrong bad sa click ia u '''EEschema''' tab.
|-
| 01:19
|Ka '''Info''' dialog-box kan paw kaba ong ba kam lap ia ka schematic.
|-
|01:25
|Sa Click '''OK'''.
|-
|01:28
|Hangne, ngan pyndonkam da ka circuit schematic jong ka '''Astable multivibrator''' ba la dep shna lypa.
|-
| 01:35
|Ban leh ia kane, ngan leit sha ka '''File''' menu, bad sa click '''Open'''.
|-
| 01:42
|Jeid ia ka folder ba don ka file ba lah dep saved.
|-
| 01:49
|Jied ia ka 'project1.sch' bad sa click '''Open'''.
|-
| 01:56
|Ngan '''resize''' ia ka window.
|-
|02:00
|Te, mynta ngan click '''Open'''.
|-
|02:06
|Kane kan plie ia ka circuit schematic.
|-
|02:08
|Ngan pynheh (zoom in) da kaba pyndokam da u scroll button jong u '''mouse'''.
|-
| 02:13
|Ngi lah dep pynmih lypa ia ka “net list” na ka bynta kane ka circuit
|-
| 02:16
|bad ngi lah dep leh mapping ia ki components ryngkat bad ki footprints.
|-
| 02:20
|Nangne pat ngi hap ban shna ia ka '''printed circuit board''' layout.
|-
| 02:26
|Ban sdang ia kane , click ia ka '''Run PCBnew''' button kaba don ha u panel hajrong jong ka 'EEschema' window.
|-
|02:36
|Kane kan plie ia ka 'PCBnew' window.
|-
| 02:39
|Ka '''info''' dialog-box kan paw kaba ong ba kam lap ia ka’project1.brd’.

|-
| 02:44
|Sa Click '''OK''' ban khang ia kane ka dialog-box.
|-
| 02:49
|Mynta phi lah ban '''import''' ia ka '''footprints''' da kaba Click ia ka '''Read netlist''' button kaba don ha ka panel hajrong jong ka 'PCBnew' window.
|-
| 02:57
| Hangne ka '''Netlist''' window kan plie.
|-
| 03:01
|Buh ia ka default settings kumba ka long.
|-
| 03:03
|Sa Click ia u '''Browse Netlist Files''' button.

|-
| 03:07
|Kane kan plie ia ka '''Select Netlist''' window.
|-
| 03:13
|Mynta ngan '''resize''' ia kane ka window khnang ban iohi bha.
|-
| 03:20
|Jied ia ka '''project1.net''' file na ka directory ba phi kwah bad sa click '''Open'''.
|-
| 03:27
|Click ia u '''Read Current Netlist''' button.
|-
| 03:30
|Kane kan pyni jingmaham (warning) da kaba ong 'project1.cmp' khlem lap.
|-
| 03:35
|Click on '''OK'''.
|-
| 03:37
|Mynta khang ia ka '''Netlist''' window da kaba click ia u '''Close''' button.
|-
| 03:42
|Phi lah ban iohi ba baroh ki '''footprints''' la rah (imported) bad buh hajrong sha ka liang kadiang duh ha ka '''PCBnew''' window.
|-
| 03:49
|Mynta ngi donkam ban buh ia baroh ki footprints hapdeng jong ka 'PCBnew' window.
|-
| 03:56
|Na ka bynta kane, click ia ka '''Manual and Automatic move and place of modules''' button kaba don ha ka panel ba hajrong jong ka'PCBnew' window.
|-
| 04:08.
| Mynta, click sha kamon (right-click) shisien hapdeng jong ka 'PCBnew' window.

|-
| 04:14
|Leit sha ka '''Glob Move and Place'''. Nangta sa click ia ka '''Move All Modules'''.

|-
| 04:22
|Kane kan plie ia ka '''Confirmation''' window. Sa click '''Yes'''.
|-
| 04:28
|Ngan pynheh da u skroll button jong u '''mouse''' ban iohi bha.
|-
| 04:35
|Phi lah lane ym lah iohi ia ki waiar balieh (white wires) kiba pyniasoh bad ki'''terminal'''s jong ki footprints
|-
| 04:39
|Lada phim iohi ia ki, sa click '''Show or Hide board ratsnest''' button kaba don ha ka panel sha liang kadiang jong ka PCBnew window.
|-
| 04:51
|Ia ki white wires la khot ruh kum ki '''airwires'''.
|-
| 04:55
|Mynta ngin pynbeit ia ki modules khnang ba tang khyndiat tylli ki airwires kin cross iwei ia iwei
|-
| 05:01
|Mynta, sa click sha kamon ia ka '''IC 555 footprint'''.
|-
| 05:07
|Leit sha ka '''Footprint''' options bad sa click '''Move'''.
|-
| 05:12
|Phin iohi ba ia ka footprint la teh lang bad u cursor.
|-
| 05:16
|Phin iohi ba kata ka bynta ka iaid katkum ka grid kaba la pyni na shadien (background).
|-
| 05:25
| Mynta, sa click shisien ban buh ia kata ka bynta kat shaba sngew donkam. Ngan buh ia kata hangne.
|-
| 05:33
|Lah ban pynkylla ia ka grid spacing da kaba pyndonkam da ka'''Grid''' options drop-down menu kaba don ha ka panel ba hajrong jong ka 'PCBnew' window.

|-
| 05:44
|Ia mynta, ngin iaid beit da ka default value, kata ka dei ka '''Grid 1.270'''.
|-
| 05:53
|Ban pyniaid ia ki components, phi lah ruh ban pyndonkam da u shortcut key 'M'.
|-
| 05:58
|Kum ka nuksa, ngan pyni ha phi kumno ban pyniaid (move) ia u '''capacitor'''.
|-
| 06:02
|Kdew ia u korsor (cursor) ha u capacitor.
|-
| 06:05
|Nion (press) 'M'. U module un sa iateh bad u cursor. Phi lah ban pyniaid kat shaba phi donkam.
|-
| 06:14
|Ban buh ia ki component click shisien.
|-
| 06:17
|Ban pynshad (rotate) ia ki component press 'R'.
|-
| 06:22
|Kum ka nuksa, peit ngan pynshad (rotate) ia u '''resistor'''. Buh ia u cursor ha u resistor bad nion 'R'.
|-
| 06:29
|Kumjuh ruh, phi lah ban pynbeit ia baroh ki component.
|-
| 06:32
|Nga la dep ban pynbeit ia ki footprints khnang ban ioh duna ka jingiatyngkhuh hapdeng ki airwires. Phi lah ban iohi hangne.
|-
| 06:41
|Mynta, ngi donkam ban pynkylla ia kine ki airwires sha kita ki '''track'''s ba shisha .
|-
| 06:46
| Hapoh kane ka '''Layer''' tab sha kamon jong ka 'PCBnew' window, jied '''Back''' layer, lada khlem jied. Ka '''Back''' layer kan pyni da ka rong jyrngam (green).
|-
| 07:01
|Ka layer ba la jied yn kdew da u khnamrit rong blue.
|-
| 07:06
|Ban shna tracks, jied '''Add tracks and vias''' button, kaba don ha ka panel ba na kamon jong ka 'PCBnew' window.
|-
| 07:17
|Mynta, to ngin click uwei na ki nodes jong u 'R1'.
|-
| 07:22
|Nangta, ngin sa nion arsien ha u node jong u 'R2' ha kaba u wire donkam ban pyniadait lang.
|-
| 07:31
|Kumjuh ruh, ngin pyndait sa uwei u wire hapdeng u '''Resistor R3''' bad u '''capacitor C1'''.

|-
| 07:38
|To ngin click uwei na ki nodes jong u 'R3'.

|-
| 07:41
|Click shisein ban pynkylla ia ka lynti jong u wire
|-
| 07:46

|Te ngin sa click arsien ia u node jong u 'C1' ha kaba ia u wire donkam ban pyndait lang.

|-
| 07:51
|Ka track ba jyrngam (green) ba lah dep thaw ka kdew ia ka copper path kaba lah shna ha ka '''printed circuit board'''.
|-
| 07:59.
|Lah ruh ban pynkylla ia ka track width (kynian).
|-
| 08:02
|Ia kane lah ban leh da kaba click ia ka '''Design Rules''' menu option ha ka menu bar jong ka 'PCBnew' window.

|-
| 08:11
|Click ia ka '''Design Rules'''.
|-
| 08:14
|'''Design Rules Editor''' kan plie ha kaba phi lah ban pynkylla ia ka track width.
|-
| 08:19
|Ngin pynkylla ia ka track width sha ka '''1.5'''. Ban leh ia kane , Click arsien ia ka value jong ka '''Track Width'''. Sa type "1.5" bad nion '''Enter'''.
|-
| 08:34
|Ban shna ia ka '''track''', ngi lah ruh ban pyndonkam ia u 'X 'key jong ka keyboard.
|-
| 08:39
|Peit ngan pyni ia phi kane. Buh ia u korsor halor jong uwei na ki nodes jong ka'''LED D1'''. Sa nion ia u dak 'X'.
|-
| 08:48
| Nangta, ngin click arsien halor u node jong u 'R3' ha kaba ia u wire donkam ban pyndait lang.
|-
| 08:54
|Phin iohi ba ka kynian (width) jong ka track ka sdang ban heh. Da kane ka lynti, phi lah ban pyndep ia ka design jong ka board.

|-
| 09:03
|Ngi la dep ban leh ia ka design na ka bynta kane ka board hangne.
|-
| 09:08
|Peit ngan plie ia ka design board ba lah dep.
|-
| 09:19
|Ngi donkam ruh ban dro ia ka PCB edges (ki dong) ban pyndep ia kane ka design.
|-
| 09:25
|Na ka bynta kane, ngi donkam ban jied ia ka '''PCB Edges''' option na ka '''Layer''' tab sha ka liang kamon jong ka 'PCBnew' window.
|-
| 09:34
|Mynta, click ia ka '''Add graphic line or polygon''' button kaba don ha ka panel sha ka liang kamon jong ka '''layout editor''' window.
|-
| 09:44
|Mynta, to ngin ia shna ia ka rectangle (dur ba don sawliang) ha sawdong kane ka '''Printed circuit Board'''.
|-
| 09:49
|Click hajrong sha ka liang ka diang jong ka layout.
|-
| 09:52
|Pyniaid ia u korsor beit beit (horizontally) sha ka liang kamon.
|-
| 09:56
|Click shisein ban pynphai ia ka lynti jong u line
|-
| 10:00
|Pyniaid ia u korsor najrong shapoh.
|-
| 10:04
|Kumjuh ruh, ngi lah ban pyndep ia ka rectangle.
|-
| 10:11
|Peit ngan pyndep ia kane ka rectangle.
|-
| 10:16
|Pynkut ia ka rectangle da kaba click arsein ia ka liang kadiang jong u mouse-button.

|-
| 10:24
|Mynta, to ngin click ia ka '''File''' menu bad sa click '''Save''' option. Sngwebha peit bha ba kane ka file dei ban save da ka extension '.brd'.
|-
| 10:38
|Kane ka pyndep ia ka board layout na ka bynta ka Astable multivibrator circuit.

|-
| 10:44
|Ha kane ka jinghikai, ngi la nang ban design'''printed circuit board''' ha ka'''KiCad''' da kaba pyndonkam da ka 'PCBnew'.
|-
| 10:50
|Peit ia ka video kaba don ha ka link harum.
|-
| 10:54
| Kan batai kyllum shaphang ka Spoken Tutorial project.
|-
| 10:56
|Lada phim don ia ka bandwith kaba biang, sa shu download bad peit.
|-
| 11:00
| Ka Spoken Tutorial project team:
|-
| 11:03
|*Ka ju ai ki jingai jinghikai (workshops) da kaba pyndonkam da ka spoken tutorials.
|-
| 11:06
|*Ka ju ai certificates ruh ia kito kiba pass ia ka onlain (online) test.
|-
| 11:10
|Ban tip bniah, sngewbha thoh sha ka:
contact at spoken hyphen tutorial dot org.
|-
| 11:15
|'''Spoken Tutorial''' project ka dei shibynta jong ka '''Talk to a Teacher''' project.
|-
| 11:19
|La kyrshan ia kane da ka National Mission on Education lyngba ka ICT, MHRD, Government of India.
|-
| 11:25
|Shibun ki jingtip kiba iadei bad kane ka jingthmu ka don ha ka:
|-
| 11:29
|spoken hyphen tutorial dot org slash NMEICT hyphen Intro.
|-
| 11:35
|Ia kane ka jingthoh (script) la noh synniang da u Abhishek Pawar.
|-
| 11:38
|Nga dei U George B. Warjri na '''IIT Bombay''', ngan pynkut noh. Khublei shibun.

@@ Line 6: / Line 6: @@
 |-
 | 00:01
-|  Paralok baieid,
+|  Paralok baieid, Ngi pdiang sngewbha ia phi sha ka '''spoken tutorial''' halor ka '''Designing printed circuit board da ka KiCad'''.
-|-
-| 00:02
-|  Ngi pdiang sngewbha ia phi sha ka '''spoken tutorial''' halor ka '''Designing printed circuit board da ka KiCad'''.
 |-
 | 00:07'''
@@ Line 39: / Line 36: @@
 |-
 | 00:43
-|Na ka bynta ki jinghikai kiba iadei, sngewbha leit sha ka:
+|Na ka bynta ki jinghikai kiba iadei, sngewbha leit sha ka: http://spoken hyphen tutorial.org
 http://spoken hyphen tutorial.org
 |-
@@ Line 48: / Line 44: @@
 |-
 | 00:52
 |Leit hajrong sha kadiang duh jong ka Ubuntu desktop screen.
 |-
@@ Line 158: / Line 153: @@
 |Na ka bynta kane, click ia ka '''Manual and Automatic move and place of modules''' button kaba don ha ka panel ba hajrong jong ka'PCBnew' window.
 |-
-| 04:08.
+| 04:08
 | Mynta, click sha kamon (right-click) shisien hapdeng jong ka 'PCBnew' window.
@@ Line 263: / Line 258: @@
 |-
 | 07:46
 |Te ngin sa click arsien ia u  node jong u  'C1' ha kaba ia u wire donkam ban pyndait lang.
@@ Line 270: / Line 264: @@
 |Ka track ba jyrngam (green) ba lah dep thaw ka kdew ia ka copper path kaba lah shna ha ka  '''printed circuit board'''.
 |-
-| 07:59.
+| 07:59
 |Lah ruh ban pynkylla ia ka track width (kynian).
 |-
@@ Line 362: / Line 356: @@
 |-
 | 11:03
-|*Ka ju ai ki jingai jinghikai (workshops) da kaba pyndonkam da ka spoken tutorials.
+|Ka ju ai ki jingai jinghikai (workshops) da kaba pyndonkam da ka spoken tutorials.
 |-
 | 11:06
-|*Ka ju ai certificates ruh ia kito kiba pass ia ka onlain (online) test.
+|Ka ju ai certificates ruh ia kito kiba pass ia ka onlain (online) test.
 |-
 | 11:10
-|Ban tip bniah, sngewbha thoh sha ka:
+|Ban tip bniah, sngewbha thoh sha ka: contact at spoken hyphen tutorial dot org.
 contact at spoken hyphen tutorial dot org.
 |-
 | 11:15

KiCad/C2/Designing-printed-circuit-board-in-KiCad/Khasi - Revision history

PoojaMoolya at 10:13, 13 April 2017

George 030390: Created page with "{| border = 1 |'''Time''' |'''Narration''' |- | 00:01 | Paralok baieid, |- | 00:02 | Ngi pdiang sngewbha ia phi sha ka '''spoken tutorial''' halor ka '''Designing printed..."