Madhurig: Created page with "'''Industrial Drawing-English''' {| border=1 |- || '''Time''' || '''Narration''' |- || 0:00 || Welcome to this '''spoken tutorial''' on '''Industrial Drawing'''. |- || 0:05..."

2024-12-23T07:11:20Z

Created page with "'''Industrial Drawing-English''' {| border=1 |- || '''Time''' || '''Narration''' |- || 0:00 || Welcome to this '''spoken tutorial''' on '''Industrial Drawing'''. |- || 0:05..."

New page

'''Industrial Drawing-English'''

{| border=1
|-
|| '''Time'''
|| '''Narration'''
|-
|| 0:00
|| Welcome to this '''spoken tutorial''' on '''Industrial Drawing'''.
|-
|| 0:05
|| In this tutorial, we will learn to,
|-
|| 0:07
|| Draw the '''Flange coupling '''component.
|-
|| 0:10
|| Convert the diagram from '''Draft''' workbench to '''TechDraw''' '''workbench '''
|-
|| 0:15
|| Annotate the dimensions and tolerance values.
|-
|| 0:19
|| To record this tutorial, I am using '''Windows 11 '''OS and '''FreeCAD '''version 0.21.2
|-
|| 0:28
|| To follow this tutorial,
|-
|| 0:29
|| Learners must be familiar with the '''FreeCAD''' interface.
|-
|| 0:33
|| For pre-requisite tutorials, please visit this website.
|-
|| 0:37
|| Industrial drawing is a graphical language.
|-
|| 0:41
|| It gives information about dimensions, tolerances, and geometries of an object.
|-
|| 0:48
|| '''Flange Coupling. '''
|-
|| 0:49
|| It is a mechanical device that connects two shafts or pipes together.
|-
|| 0:55
|| It transmits power or flow of substance from one shaft to another.''' '''
|-
|| 01:02
|| We will now draw this industrial drawing.
|-
|| 01:05
|| Let us open '''FreeCAD. '''
|-
|| 01:08
|| Click on '''File''' and select '''New.'''
|-
|| 01:11
|| I have selected the '''Draft''' workbench.
|-
|| 01:14
|| Select '''Top''' view and '''Orthographic''' view using the '''Gizmo'''.''' '''
|-
|| 01:19
|| Please ensure that '''Snap''' '''Center''' point and '''Snap''' '''Endpoint''' tools are enabled.
|-
|| 01:26
|| Select the '''Circle''' tool from the tool bar.
|-
|| 01;30
|| In the '''Combo View''' check the '''Continue''' check box.
|-
|| 01:34
|| Uncheck '''Filled''' checkbox if it is checked for you.
|-
|| 01:38
|| Let us draw a circle of radius 50 '''millimetres'''.
|-
|| 01:43
|| Let us continue to draw concentric circles using the same centre.
|-
|| 01:48
|| Place the cursor on the circumference.
|-
|| 01:51
|| It is highlighted in yellow colour and white coloured centre point is visible.
|-
|| 01:57
|| Now click on the circumference and drag to see the radius.
|-
|| 02:02
|| In the '''Radius''' field change the radius to 43 '''millimetres'''.
|-
|| 02:07
|| Now let us draw the third circle with radius 28.8 '''millimetres'''.
|-
|| 02:13
|| I will continue to draw circles using the same center point.
|-
|| 02:18
|| The radii of the circles are 22.3 '''millimetres''',
|-
|| 02:25
|| 21 '''millimetres''',
|-
|| 02:29
|| 18 '''millimetres''',
|-
|| 02:33
|| and 10 '''millimetres''' respectively.
|-
|| 02:36
|| Click on '''Close''' button in the '''Combo''' '''View'''.
|-
|| 02:40
|| I will now draw a line from the centre of the circle to the outermost circle.
|-
|| 02:45
|| Click on the '''Line''' tool
|-
|| 02:47
|| For this please enable the '''Snap''' '''Endpoint''' tool.
|-
|| 02:53
|| Click on '''Close''' button in the '''Combo''' '''View'''.
|-
|| 02:58
|| Select the '''Line''' tool.
|-
|| 03:00
|| In the '''Draft''' '''snap''' toolbar, click on '''Polar''' '''Array''' from the '''Array''' dropdown.
|-
|| 03:05
|| The '''Polar''' '''Array''' menu opens in the '''Combo''' '''View'''.
|-
|| 03:11
|| In the '''Number''' '''of''' '''elements''' field choose 4 .
|-
|| 03:13
|| Click on the circumference in order to see the centre of the circle.
|-
|| 03:19
|| Now we see four lines dividing the circles into four parts.
|-
|| 03:24
|| Press '''Ctrl''' '''key''' and left click on the lines to select them.
|-
|| 03:29
|| In the '''Property''' tab change the draw style from '''Solid''' to '''Dashdot'''.
|-
|| 03:35
|| Notice that the lines change from solid format to dashdot format.
|-
|| 03:40
|| Let’s draw a circle of radius 4 '''mm''' at the intersection of the line and second circle.
|-
|| 03:47
|| Let us change its radius to 4 '''mm''' in the radius field.
|-
|| 03:52
|| Click on the '''Close''' button to close the '''Circle''' tool.
|-
|| 03:56
|| Click on the drawn circle.
|-
|| 03:58
|| Click on the '''Polar''' '''array''' from the toolbar.
|-
|| 04:01
|| Let us change the number of elements to 8.
|-
|| 04:04
|| Click the circumference of this circle to ensure the centre.
|-
|| 04:09
|| Observe that eight circles are drawn at a 45 degree interval with center point.
|-
|| 04:14
|| Let us select circles of the drawing.
|-
|| 04:18
|| Press and hold the '''Ctrl''' '''key''' and click on all the circles one by one.
|-
|| 04:24
|| In the '''Property''' tab change the '''Angular''' '''deflection''' from 28 to 1 degree.
|-
|| 04:30
|| And change '''Deviation''' from 0.5 to 0.1.
|-
|| 04:35
|| Press '''Enter''' to apply the changes.
|-
|| 04:38
|| This is done to get perfect circularity in the drawing.
|-
|| 04:42
|| Now let us save the file.
|-
|| 04:45
|| Save the file in your convenient location.
|-
|| 04:49
|| Type the filename as '''Industrialdrawing''' and click on '''Save''' button.
|-
|| 04:55
|| Now let us change the workbench from '''Draft''' to '''TechDraw'''.
|-
|| 05:00
|| Click on '''Insert''' '''Page''' '''using''' '''Template''' tool on the toolbar.
|-
|| 05:05
|| '''Select''' '''a''' '''Template''' '''File''' window opens.
|-
|| 05:09
|| In this window you can select the drawing templates as per your choice.
|-
|| 05:14
|| Click the '''Open''' button to load the selected template.
|-
|| 05:17
|| You can see a table at the bottom right corner.
|-
|| 05:22
|| In this table you can observe the green coloured editable text fields.
|-
|| 05:28
|| Details can be changed by double clicking on the fields.
|-
|| 05:32
|| Here I will change the '''Designed''' '''by''' '''name''' to '''Spokentutorial'''.
|-
|| 05:37
|| The new tab named page appears at the bottom of the window.
|-
|| 05:42
|| You can also insert the default page by clicking the '''Insert''' '''default''' '''Page''' '''icon'''.
|-
|| 05:48
|| Now go back to the drawing.
|-
|| 05:52
|| Press '''Ctrl''' and '''A''' keys to select all the draft components.
|-
|| 05:57
|| Click the '''Insert''' '''projection''' '''Group''' icon on the toolbar.
|-
|| 06:01
|| If this tool is not seen, drag and arrange toolbars to see all the tools.
|-
|| 06:07
|| '''Page Chooser '''window''' '''opens'''. '''
|-
|| 06:10
|| Select the appropriate page and click on '''OK''' button.''' '''
|-
|| 06:14
|| Sometimes the '''Page''' '''Chooser''' window may not open.''' '''
|-
|| 06:18
|| The diagram loads automatically on the page.''' '''
|-
|| 06;22
|| The '''Projection''' '''Group''' menu opens in the '''Combo''' '''View.'''
|-
|| 06:26
|| You can change the projection type to First angle or Third angle.
|-
|| 06:31
|| Click the '''OK''' button to make the changes.
|-
|| 06:34
|| Click and drag the drawing to position it in an appropriate place.
|-
|| 06:39
|| Now you can see that new tools are available to label the drawing.
|-
|| 06:44
|| Now let us show the diameter of the outer circle.
|-
|| 06:48
|| Click on the circumference of the outer circle.
|-
|| 06:51
|| Select the '''Insert''' '''Diameter''' '''Dimension''' tool to mark the diameter of the outer circle.
|-
|| 06:58
|| The diameter is shown as 100 '''millimetres'''.
|-
|| 07:02
|| Click and drag the '''phi''' value to see the line and value clearly.
|-
|| 07:07
|| Double click on the '''phi''' value to open the '''Dimension''' dialog box in the '''Combo''' '''View'''.
|-
|| 07:13
|| You can change the tolerance value for the upper limit and lower limit values.
|-
|| 07:18
|| I will change the '''Overtolerance''' value to +/ -0.05 '''mm'''
|-
|| 07:25
|| Uncheck the '''Equal''' '''Tolernace''' checkbox.
|-
|| 07:28
|| Click the '''FilpArrowheads''' checkbox to flip and unflip the arrow heads.
|-
|| 07:33
|| Click on '''OK''' button.
|-
|| 07:35
|| Now repeat the process for the next circle.
|-
|| 07:40
|| Find the diameter and change the '''Overtolerance''' value.
|-
|| 07:48
|| Click on '''OK '''button
|-
|| 07:51
|| Select the smaller circle and select the '''Insert''' '''Balloon''' '''Annotation''' tool.
|-
|| 07:57
|| We can change the properties of the balloon by double-clicking on it.
|-
|| 08:02
|| In the '''Combo''' '''View''', the '''Balloon''' dialog box opens.
|-
|| 08:06
|| In the '''Bubble''' '''Shape''' field observe a small circle with an arrow.
|-
|| 08:11
|| You can change the bubble shape to rectangle.
|-
|| 08:15
|| Now change the text to '''8X''' '''Dia''' '''8'''(8 times dia 8).
|-
|| 08:19
|| It denotes that there are eight similar circles with diameter of 8 '''millimetres'''.
|-
|| 08:25
|| Draw another balloon for the outer circle.
|-
|| 08:28
|| Select the balloon.
|-
|| 08:30
|| Go to '''TechDraw''' on the menu bar.
|-
|| 08:33
|| Navigate and select Extensions: '''Attributes/Modifications''' option.
|-
|| 08:39
|| From the submenu '''Select''' '''Customize''' '''Format''' '''Label''' option.
|-
|| 08:44
|| A '''Customize''' '''Format''' dialog box will appear on the '''combo''' '''view. '''
|-
|| 08:49
|| Select the diameter symbol from the '''Radius''' '''and''' '''Diameter''' tab.
|-
|| 08:54
|| In the '''format''' field, type the diameter as 0.14.
|-
|| 09:00
|| Select '''M''' from the '''Modifiers''' tab. .
|-
|| 09:04
|| Type vertical bar or pipe using the keyboard
|-
|| 09:08
|| Then select '''A''', '''C''' from the '''Modifiers''' tab.
|-
|| 09:12
|| Type another vertical bar and finally select '''M.'''
|-
|| 09:17
|| Now click the '''OK''' button at the top of the dialog box to accept the changes.
|-
|| 09:23
|| Let us change the '''bubble''' '''shape''' to '''rectangle'''.
|-
|| 09:29
|| You can add '''surface''' '''finish''' value by clicking the area to be surface finished.
|-
|| 09:35
|| Click the area to be surface finished,
|-
|| 09:38
|| Select '''Create''' '''a''' '''surface''' '''finish''' '''symbol'''.
|-
|| 09:42
|| '''Surface Finish Symbols '''dialog box opens in the '''Combo View'''.
|-
|| 09:47
|| Select the appropriate symbol, and select the average roughness value from the dropdown.
|-
|| 09:53
|| Then click the '''OK''' button at the top.
|-
|| 09:59
|| Now let us save our work .
|-
|| 10:02
|| With this we come to the end of this tutorial.
|-
|| 10:04
|| Let us summarize.
|-
|| 10:07
|| In this tutorial, we
|-
|| 10:09
|| Drew the '''Flange''' '''coupling''' component
|-
|| 10:12
|| Converted the diagram from '''Draft''' workbench to '''TechDraw''' workbench
|-
|| 10:16
|| Annotated the dimensions and tolerance values.
|-
|| 10:21
|| For the assignment activity, please do the following.
|-
|| 10:25
|| Practice''' dimensioning''' tools.
|-
|| 10:28
|| '''Balloon insertio'''n tool and '''Tolerances'''
|-
|| 10:32
|| The video at the following link summarises the '''Spoken''' '''Tutorial''' Project.
|-
|| 10:37
|| Please download and watch it.
|-
|| 10:40
|| We conduct workshops using spoken tutorials and give certificates.
|-
|| 10:44
|| For more details, please write to us.
|-
|| 10:48
|| Please post your timed queries in this forum.
|-
|| 10:52
|| The Spoken Tutorial project was established by the Ministry of Education Government of India.
|-
|| 10:58
|| This tutorial is contributed by K. Sakthivel and Madhuri Ganapathi
|-
|| 11:02
|| Thank you for joining.
|-
|}

FreeCAD/C3/Industrial-Drawing/English-timed - Revision history

Madhurig: Created page with "'''Industrial Drawing-English''' {| border=1 |- || '''Time''' || '''Narration''' |- || 0:00 || Welcome to this '''spoken tutorial''' on '''Industrial Drawing'''. |- || 0:05..."