ElectroBlocks-archive-sept-2025/C2/Control-LED-with-Push-button/English - Revision history

Madhurig: Madhurig moved page ElectroBlocks/C2/Control-LED-with-Push-button/English to ElectroBlocks-archive-sept-2025/C2/Control-LED-with-Push-button/English without leaving a redirect

2025-09-03T07:10:06Z

Madhurig moved page ElectroBlocks/C2/Control-LED-with-Push-button/English to ElectroBlocks-archive-sept-2025/C2/Control-LED-with-Push-button/English without leaving a redirect

Pratiknemane at 07:05, 9 June 2025

2025-06-09T07:05:09Z

Show changes

PratikNemane at 11:45, 15 April 2025

2025-04-15T11:45:12Z

PratikNemane at 11:34, 15 April 2025

2025-04-15T11:34:56Z

PratikNemane at 11:31, 15 April 2025

2025-04-15T11:31:47Z

PratikNemane at 11:29, 15 April 2025

2025-04-15T11:29:04Z

PratikNemane at 11:26, 15 April 2025

2025-04-15T11:26:44Z

PratikNemane: Created page with "'''Title of the Script:'''Control LED with Push button '''Author''': Pratik Nemane '''Keywords''': Electroblocks, arduino board, 220 ohm resistor, LEDs breadboard, Push butt..."

2025-04-15T11:19:35Z

Created page with "'''Title of the Script:'''Control LED with Push button '''Author''': Pratik Nemane '''Keywords''': Electroblocks, arduino board, 220 ohm resistor, LEDs breadboard, Push butt..."

New page

'''Title of the Script:'''Control LED with Push button

'''Author''': Pratik Nemane

'''Keywords''': Electroblocks, arduino board, 220 ohm resistor, LEDs breadboard, Push button, video tutorial, spoken tutorial.

{| border =1
|-
|| '''Visual Cue'''
|| '''Narration'''
|-
|| '''Slide 1:'''

'''Title slide.'''
|| Welcome to the Spoken Tutorial on '''Control LED with Push button''' using '''Electroblocks'''.
|-
|| '''Slide 2:'''

'''Learning Objective'''
|| In this tutorial, we will learn how to,# Build a set of blocks to create a '''Control LED with Push button.'''
# Check the output of the experiment using the '''simulator.'''

|-
|| '''Slide 3:'''

'''System Requirements'''
|| To record this tutorial, I am using:
* Ubuntu Linux OS version 22.04
* Google Chrome Browser.

A working internet connection to use '''Electroblocks'''.
|-
|| '''Slide 4:'''

'''Prerequisite'''

https://spoken-tutorial.org
|| To follow this tutorial,
* Learner should have a basic knowledge of '''Electroblocks interface '''
* If not, please visit the relevant tutorials on this website.

|-
|| Open Google Chrome browser.

In New Tab, type

[https://electroblocks.org/ https://electroblocks.org/] '''

Point towards Default Blink LED circuit.
|| Let us open the '''Electroblocks''' platform using '''Google''' '''Chrome''' browser.

For that Type this url in the address bar.

You will see the default '''Blink LED''' circuit on the screen.
|-
|| Click on the '''New File/Blank File''' icon.

A Pop-up window appears.

Click on the '''OK''' button.
|| Click on the '''New File/Blank file''' option available on the toolbar.

A pop-up window appears on the screen.

Click on the '''OK''' button to start a new project.
|-
|| Point towards the '''loop block'''.
|| A default '''loop block''' appears on the screen.

Let’s drag the default '''loop block''' to a convenient place to insert '''push buttons.'''

|-
|| '''Add the entire Output video.mp4 in the main video at the 1:29 timestamp.'''
|| We will create this '''Control LED with Push Button''' output.

Let’s get started by building a '''Control LED '''with '''Push Button''' using '''Electroblocks'''.
|-
|| '''Main Video.mp4'''

Click on '''Logic Block.'''

Point towards all the six '''Logic Blocks'''.

Select''' If then else block, '''and drag it in the working area.''' '''

Place this block inside the '''loop block'''.
|| First we need an '''If then else''' block.

Click on the '''Logic''' option on the left panel.

You can see six '''Logic Blocks'''.

Click on the '''If then else block''' and drag it to the working area.

Place this '''block''' inside the '''loop block'''.
|-
|| Click on '''Sensor'''

A new list will appear.

Click on the '''Button''' option.
|| We require a '''button''' to control the '''LED'''.

Click on the '''Sensors''' menu on the left panel.

A new list opens.

Click on the '''Button''' option.
|-
|| Point the cursor towards all three blocks.

Select the '''Button setup''' block and drag it in the working area.

Point towards “'''Button Setup'''”
|| You will see three blocks.

Select the '''Button setup''' block and drag it to the working area.

The '''Button Setup block''' is used to configure a '''push button''' in the '''circuit'''.
|-
|| Point towards '''“Connected to PIN#”'''

Point towards the '''“USE PULL UP Resistor” '''checkbox.

Point towards the unchecked checkbox.

Only narration.
|| By default, this button is connected to '''pin 2''' of Arduino.

Below, you can see the '''"USE PULLUP Resistor"''' checkbox.

By default this box is unchecked.

We will leave the box unchecked.

This indicates that an '''external resistor''' is connected to the '''button'''.
|-
|| Point the cursor to the “Is Button Pressed” checkbox.

Show the enabled checkbox.
|| By default, the '''"Is Button Pressed"''' checkbox in the button setup is always checked.

It means that the '''button''' will be in the pressed state when you run the simulation.
|-
|| Point towards the '''“Loop Dropdown”'''

Point towards
|| Observe the '''loop dropdown''' option in the '''Button Setup''' block.

Here, '''loop 1''' is selected.

It indicates that this setting is applied to '''loop 1 only'''.
|-
|| Point to '''Copy All''' option.

Check the '''Copy All''' checkbox.

Point to button setup block
|| You can see a checkbox against the '''Copy all''' option in the '''Button setup''' block.

Check the '''Copy All''' checkbox.

This setting ensures that the '''button''' setup stays the same, for all the loops in the simulation.
|-
|| Only narration

Click on the '''Button''' option.

Select the '''Button is pressed?''' block and drag it in the working area.

Place this block in the '''If '''section of the '''if then else '''block.
|| We will add a '''button''' '''block''' in the '''loop'''.

Click on the '''Button''' option.

Select the '''Button is pressed?''' block and drag it to the working area.

Place this block in the '''If '''section of the '''if then else '''block.
|-
|| Only narration.

Click on '''Add-ons.'''

A new list will appear.
|| Now we will add an '''LED''' to the circuit.

Click on the '''Add-ons''' menu on the left panel.

A new list appears.
|-
|| Click on the LED option.

Point to the two blocks.

Click on the '''Turn on LED''' block and drag it in the working area.
|| Click on the '''LED''' option.

You will see that two LED blocks will appear.

Click on the '''Turn on LED''' block and drag it to the working area.
|-
|| Place this block in the '''then''' section of the '''If then else '''block.

Point to the grey area.

Point to the simulation screen to show the circuit disappeared.
|| Place this block in the '''then''' section of the '''If then else '''block.

You will see that the '''LED''' and '''button setup''' block will turn to grey.

Also, the circuit in the '''simulation '''is not seen'''.'''
|-
|| Point towards the LED and push button.
|| This is an error.

It occurs because both the '''LED''' and '''push button''' are connected to '''pin 2''' of the arduino.

To resolve this error, we will assign a different '''pin number''' to the '''LED'''.

|-
|| Click on the dropdown arrow in the LED block.

Change the pin number to '''pin 4'''.

Point towards the block to show their changes.
|| Click on the dropdown arrow in the '''LED block'''.

Change the pin number to '''pin 4'''.

Now, all the blocks appear in normal condition.

|-
|| Only narration.

Only narration

Click on the '''Time''' section.
|| Let’s make sure that the LED remains turned '''ON '''for a sufficient amount of time.

For this, we must add a '''delay''' '''block'''.

Click on '''Time''' on the left panel.
|-
|| Drag and drop the '''Wait block for 0.2 second''' block in the working area.
Place this block below the '''turn ON LED''' block.

Change the time to 2 seconds in the block.

|| Drag and drop the '''Wait block for 0.2 second''' block to the working area.

Place this block below the '''turn ON LED block'''

Change the time to 2 seconds in the '''block'''.

|-
|| Only narration.

Right click on the '''Turn on LED''' '''block''' and select the '''Duplicate''' option.

|| Now we will '''turn OFF the LED.'''

Right click on the '''Turn on LED''' '''block''' and select the '''Duplicate''' option.

A new '''Turn on LED block''' will be created in the working space.

|-
|| Drag and place this new block inside the '''else''' section of '''If then else''' block.

Click on the dropdown arrow and select '''OFF'''

|| Drag and place this new '''block''' inside the '''else''' section of '''If then else''' block.

To change the state of the LED, click on the dropdown arrow and select '''OFF'''.

This '''block''' '''turns OFF''' the LED connected to '''pin 4'''.
|-
|| Only narration.

Click on the '''Code Icon'''.
|| Now we will see the '''arduino code''' generated by '''electroblocks'''.

Click on the '''Code Icon'''.
|-
|| Highlight '''Pin 4''' line of code.
|| In the '''void setup''' function, you will see '''pin 2''' and '''pin 4''' are mentioned.

'''Pin 4''' is assigned to the '''LED'''.
|-
|| Point to OUTPUT

Highlight '''Pin 2''' line of code.

|| It is termed as '''OUTPUT''' because the '''arduino''' gives a value to the '''LED'''.

'''Pin 2''' is assigned to the '''push button'''.

It is termed as '''INPUT '''because the '''arduino''' takes a value from the '''push button'''.

|-
|| Point to the '''void loop function.'''

Highlight the '''if ((digitalRead(2) == HIGH))'''

Highlight '''LED''' turned '''HIGH''' line of code.

|| This is the '''void loop function'''.

It shows the action performed by '''components''' and '''sensors''' in the experiment.

'''if ((digitalRead(2) == HIGH))'''

This line checks if the button connected to '''pin 2''' is pressed or not.

'''digitalWrite(4, HIGH)'''

This line describes the '''LED''' connected to '''pin 4''' '''turn ON'''.

|-
|| Highlight '''delay(2000)''' line of code.

Arduino narration.

Highlight '''LED''' turned '''LOW''' line of commands.

|| '''delay(2000)'''

This line makes sure that the '''LED''' is '''turned ON '''for '''2 seconds'''.

In the '''arduino syntax''', '''2000 milliseconds''' represent '''2 seconds.'''

If the condition is '''false''', the code inside the '''else''' block will execute

'''digitalWrite(4, LOW)'''

This line describes the '''LED''' connected to '''pin 4''' '''turns OFF'''.

|-
||
|| Let’s check the desired result using the simulator.
|-
|| Click on Home page

Click on the play button
|| Click on the '''Home''' page option from the toolbar.

Click on the '''Play''' button to start the simulation.
|-
|| Show the '''LED''' is turned '''ON'''.
|| The visual representation of the simulation shows that:

When the '''push button''' is pressed, the '''LED''' is '''turned ON '''for 2 seconds.

Let us check the output of the '''LED''' if we don’t press the '''pushbutton'''.
|-
|| Only narration

'''Uncheck''' the Is button is pressed box in the button setup

Click on the '''play''' button again.

|| For this condition, '''uncheck''' the '''Is button pressed''' checkbox in the button '''setup block'''.

Start the simulation again.

Notice that when the push button is '''not pressed''', the '''LED remains OFF'''.

|-
|| Only narration.

'''check''' the '''Is button pressed '''box in the '''button setup block.'''

Click on the '''Previous Step''' button to return to the beginning of Step 1.
|| To see the simulation in the step by step manner.

First '''check''' the '''Is button pressed '''box in the '''button setup block.'''

Then click on the '''Previous Step''' button to return to the beginning of '''Step 1'''.

|-
|| Click on the '''Next step'''

Point the cursor to the yellow colour outline

|| Click on the '''Next Step''' button and notice the blocks in the working area.

The '''execution state''' of the '''block''' is highlighted with a '''yellow''' colour '''outline'''.
|-
|| '''Add the entire Output video.mp4 in the main video at the 10:21 timestamp.'''
|| Notice the output of the experiment.
|-
||
|| This brings us to the end of this tutorial.

Let us summarise.
|-
|| Slide 5:

'''Summary'''
|| In this tutorial, we will learnt how to,

# Build a '''set''' of blocks to create a '''Control LED''' with '''Push button'''.
# Check the '''output''' of the experiment using the simulator

|-
|| Slide 6:

'''Assignment'''
|| As an assignment, please do the following:
# Add two buttons and one LED in ElectroBlocks.
# Connect the first button to pin 3, the second button to pin 4, and the LED to pin 2.
# Create a project with the following functionality:
# Pressing the first button turns the LED on.
# Pressing the second button turns the LED off.

'''Hint'''- Don't use a time block.
|-
|| '''Add the Assignment video.mp4 in the main video at 10:54 timestamp.'''
|| Notice the output of the assignment shown in the video.
|-
|| '''Slide 7:'''

'''About Spoken Tutorial project'''
|| The video at the following link summarizes the Spoken Tutorial project.

Please download and watch it.
|-
|| '''Slide 8:'''

'''Spoken Tutorial workshops'''
|| The Spoken Tutorial Project Team conducts workshops and gives certificates.

For more details, please write to us.
|-
|| '''Slide 9:'''

'''Answers for THIS Spoken Tutorial'''

|| Please post your timed queries in this forum.
|-
|| '''Slide 10:'''

'''Acknowledgement'''
|| Spoken Tutorial project was established by the Ministry of Education(MoE), Govt of India
|-
|| '''Slide 11:'''

'''Thank you'''
|| This tutorial has been contributed by FOSSEE and Spoken Tutorial Project, IIT Bombay.

Thank you for watching.
|-
|}

@@ Line 423: / Line 423: @@
 # Connect the first button to pin 3, the second button to pin 4, and the LED to pin 2.
 # Create a project with the following functionality:
-   * Pressing the first button turns the LED on.
+* Pressing the first button turns the LED on.
-   * Pressing the second button turns the LED off.
+* Pressing the second button turns the LED off.
 '''Hint'''- Don't use a time block.

← Older revision	Revision as of 07:10, 3 September 2025
(No difference)

@@ Line 47: / Line 47: @@
 |-
 || Open Google Chrome browser.
 In New Tab, type
 [https://electroblocks.org/ https://electroblocks.org/] '''
 Point towards Default Blink LED circuit.

@@ Line 19: / Line 19: @@
 '''Learning Objective'''
-|| In this tutorial, we will learn how to,# Build a set of blocks to create a '''Control LED with Push button.'''
+|| In this tutorial, we will learn how to,
 # Check the output of the experiment using the '''simulator.'''
@@ Line 57: / Line 58: @@
 Point towards Default Blink LED circuit.
 || Let us open the '''Electroblocks''' platform using '''Google''' '''Chrome''' browser.
 For that Type this url in the address bar.
@@ Line 320: / Line 320: @@
 It shows the action performed by '''components''' and '''sensors''' in the experiment.
 '''if ((digitalRead(2) == HIGH))'''
 This line checks if the button connected to '''pin 2''' is pressed or not.
 '''digitalWrite(4, HIGH)'''
@@ Line 341: / Line 339: @@
 This line makes sure that the '''LED''' is '''turned ON '''for '''2 seconds'''.
 In the '''arduino syntax''', '''2000 milliseconds''' represent '''2 seconds.'''
@@ Line 430: / Line 427: @@
 # Connect the first button to pin 3, the second button to pin 4, and the LED to pin 2.
 # Create a project with the following functionality:
-      # Pressing the first button turns the LED on.
+      Pressing the first button turns the LED on.
-     # Pressing the second button turns the LED off.
+     Pressing the second button turns the LED off.
 '''Hint'''- Don't use a time block.
@@ Line 442: / Line 439: @@
 '''About Spoken Tutorial project'''
 || The video at the following link summarizes the Spoken Tutorial project.
 Please download and watch it.
@@ Line 450: / Line 446: @@
 '''Spoken Tutorial workshops'''
 || The&nbsp;Spoken Tutorial Project&nbsp;Team conducts workshops and gives certificates.
 For more details, please write to us.