Nancyvarkey at 11:27, 7 August 2020

2020-08-07T11:27:04Z

Show changes

Glorianandihal at 19:04, 5 August 2020

2020-08-05T19:04:56Z

Glorianandihal at 19:04, 5 August 2020

2020-08-05T19:04:38Z

Glorianandihal at 18:32, 5 August 2020

2020-08-05T18:32:42Z

Glorianandihal at 11:16, 5 August 2020

2020-08-05T11:16:52Z

Glorianandihal: Created page with "'''Subcircuit Builder in eSim''' '''Author: Gloria N ''' '''Keywords: eSim, Subcircuit, KiCad, Eeschema, Subcircuit, Part library, Schematic, Half adder, Subcircuit, Pin, Po..."

2020-08-04T18:40:36Z

Created page with "'''Subcircuit Builder in eSim''' '''Author: Gloria N ''' '''Keywords: eSim, Subcircuit, KiCad, Eeschema, Subcircuit, Part library, Schematic, Half adder, Subcircuit, Pin, Po..."

New page

'''Subcircuit Builder in eSim'''

'''Author: Gloria N '''

'''Keywords: eSim, Subcircuit, KiCad, Eeschema, Subcircuit, Part library, Schematic, Half adder, Subcircuit, Pin, Port'''

{| border="1"
|-
| style="color:#000000;" | '''Visual cue'''
| style="color:#000000;" | '''Narration'''
|-
|| '''Show Slide:'''
Opening Slide
|| Welcome to the spoken tutorial on '''Subcircuit Builder''' in '''eSim'''.

|-
||'''Show Slide:'''
Learning Objectives
||In this tutorial, using '''eSim''' we will learn to-
*Create a '''Subcircuit''' and
*Create a '''Component Schematic'''.

|-
||'''Show Slide:'''
Systems Requirements
||To record this tutorial, we will use-
*'''Ubuntu Linux OS''' version 16.04
*'''eSim''' version 2.0

|-
||'''Show Slide:'''
Pre-requisites
||To practice this tutorial, you should know how to create and simulate a circuit in eSim.

If not, watch the prerequisite eSim tutorials on this website.

|-
||'''Show Slide:'''
General form of Subcircuit

||The subcircuit file always begins with the dot '''subckt''' statement.

'''Subname''' is the subcircuit component name.

'''N1''','''N2''' are the nodes.

The subcircuit ends with dot '''ENDS''' followed by the subcircuit name.

|-
||'''System Computer:'''
Desktop icon

||To launch '''eSim''', you need to double-click on the '''eSim''' icon on your '''Desktop'''.

|-
||'''System Computer:'''
eSim startup window

||I have already opened '''eSim'''.

|-
||'''eSim Main Window:'''
Creating Subcircuit

|| Let us now create a ''Subcircuit'' for a ''Half adder''.

|-
||'''eSim Main Window:'''
Click on Subcircuit
||On the '''eSim''' window, click on the '''Subcircuit''' button from the left toolbar.

A '''subcircuit''' tab will open up.

|-
||'''Subcircuit tab:'''

Click on '''New Subcircuit Schematic''' >>

Enter '''Schematic Name''' as '''Halfadder_new'''>>

click '''OK'''

||In the '''Subcircuit''' tab, click on the ''''New Subcircuit Schematic''' button.

A '''New Schematic''' pop up window appears.

Enter '''Schematic Name''' as '''Halfadder''' underscore '''new'''.

Click on the '''OK''' button.

|-
||'''eSim Schematic Window:'''
Click '''Yes'''

||Now, click the '''Yes''' button in the '''confirmation''' dialog box.

The ''schematic editor'' window opens up.

The user can create a schematic or import an existing schematic.

We will use the latter method.

To create a new schematic, you can refer to the previous tutorials in this series.

|-
||'''Slide show:'''

Adding '''Half_adder_basic_gates''' from the '''Code''' file section.

||I have already created a ''half adder'' circuit using basic ''gates'' in '''eSim'''.

Pause the video here.

Download the '''Half Adder Basic Gates''' project file from the '''Code''' file section.

Extract and save the project file on the '''Desktop'''.

|-
||'''eSim Schematic Window:'''

Click on '''File'''>>

Click on '''Append Schematic Sheet'''>>

Click '''Yes'''

Click on '''Desktop'''>>

Double click on ''''Half_adder_basic_gates''' >>

Select ''''Half_adder_basic_gates.sch''' >>

click '''Open'''

||On ''eeschema'', click on the '''File''' option from the top menu.

Select '''Append Schematic Sheet''' option.

In the '''confirmation''' dialog box, click on the '''Yes''' button.

Click on '''Desktop'''.

Double-click on '''Half adder basic gates''' folder.

The schematic file, '''sch''' will be selected.

Click on the '''Open''' button in the file window.

You can see the ''schematic'' of the ''half adder'' is added to the ''editor''.

|-
||'''eSim Schematic Window:'''
Zoom in the schematic

||Press the '''F1''' key, to zoom in the schematic.

|-
||'''eSim Schematic Window:'''

||Now we will connect ''ports'' to the input and output ''terminals'' of the ''gates''.

|-
||'''eSim Schematic Window:'''

Click on '''Place Component''' Tool >>

click on '''editor'''>>

In the '''Filter''' field, type '''eSim_Miscellaneous''' >>

Select '''PORT''' >>

click on the '''Port''' drop-down>>

choose '''Unit A''' >>

click '''OK'''

||Click on the '''Place component''' tool from the right toolbar.

Click on the '''editor'''.

In the '''Filter''' field, type '''eSim''' underscore '''Miscellaneous'''.

Select '''PORT''' and press the drop-down arrow.

Click on '''Unit A''' and click on the '''OK''' button.

'''Port Unit A''' will be tied to the cursor.

|-
||'''eSim Schematic Window:'''
Adding '''PORT A''' and '''PORT B'''

||Place it near the input '''pin 1''' of the '''XOR''' gate.

Similarly, place '''Port Unit B''', near the input '''pin 1''' of the '''AND''' gate.

|-
||'''eSim Schematic Window:'''
Adding '''PORT C''' and '''PORT D'''

||Place '''Port Unit C''' and '''Port Unit D''' near the output ''pin'' of the '''XOR''' gate and '''AND''' gate respectively.

Here the ''Port unit'' indicates ''pins'' of the subcircuit.

'''Unit A''' is '''pin 1''', '''Unit B''', '''C''' and '''D''' are the pin number ''2'', ''3'',''4'' of the subcircuit respectively.

|-
||'''eSim Schematic Window:'''
Rotating '''PORT C''' and '''PORT D'''

||To rotate the '''Port C''', place the cursor on '''Port Unit C''' and press the '''R''' key.

A '''clarify selection''' pop-up window appears.

Select '''Port U''' and press the '''R''' key.

Similarly, rotate '''Port D'''.

|-
||'''eSim Schematic Window:'''
Place cursor on '''Port A''', pin1>>

press '''W''' key, to start the ''wire''

connect it to the ''wire'' connecting '''Pin 1''' of '''Xor''' gate and '''And''' gate>>

Click once to end the ''wire''

||Connect the ''ports'' to the ''pins'' with ''wires''.

Place the cursor on the '''pin1''' of '''PORT A''' and press the '''W''' key to start the wire.

Drag it to the ''wire'' connecting the '''pin 1''' of '''XOR''' gate and '''AND''' gate.

Click once to end the wire.

A ''junction'' will be placed on the wire.

Similarly, connect all the ''ports'' to the ''pins'' as shown here.

|-
||'''eSim Schematic Window:'''
Click on '''Annotate''' >>

click '''OK'''

||Let us now ''Annotate'' the schematic.

Click on the '''Annotate schematic components''' icon from the top toolbar.

Keep the default settings.

Click on the '''Annotate''' button.

Click on the '''OK''' button.

|-
||'''eSim Schematic Window:'''
Press '''Ctrl+S''' keys together

||Save the schematic by pressing '''Ctrl+S''' keys together.

|-
||'''eSim Schematic Window:'''
Click '''Generate netlist'''>>

select '''Spice''' tab >>

check '''Default format'''>>

click on '''Generate'''.

Click '''Save'''

||Let us generate a ''netlist'' for the schematic.

Click on the '''Generate netlist''' icon from the top toolbar.

Select the '''Spice''' tab and check the '''Default format'''.

Click on '''Generate''' button and then click the '''Save''' button.

This creates a ''KiCad'' netlist file.

|-
||'''Subcircuit tab:'''

Click on '''Convert Kicad to Ngspice'''

||Now, let us go back to the '''eSim''' window.

In the '''Subcircuit''' tab, click on the '''Convert Kicad to Ngspice''' button.

|-
||'''Subcircuit tab:'''
Point to '''transient''' analysis parameters

||You can specify the '''transient''' analysis parameters or leave it blank.

I am leaving these values blank.

|-
||'''Subcircuit tab:'''
Highlight '''Device modeling''' and '''Subcircuit''' tab.

||If any ''Device model'' or ''Subcircuit'' is used, specify them under '''Device modeling''' or '''Subcircuit''' tab.

|-
||'''Subcircuit tab:'''
Press '''Convert''' >>

Click '''OK'''

||In the '''KiCad to Ngspice''' tab, press the '''Convert''' button.

Click on the '''OK''' button in the '''information''' dialog box.

This creates a ''Ngspice'' netlist of the subcircuit created.

|-
||'''eSim Subcircuit Library:'''

||You can see, the subcircuit '''Half Adder new''' is added to the '''subcircuit''' library in the '''eSim''' directory.

|-
||'''eSim Schematic Window:'''

||Now, let us create a component schematic for the ''Half Adder'' subcircuit.

The components are also referred to as ''Parts'' or ''symbols''.

|-
||eSim Schematic Window:
Go back to the '''eSim''' editor of '''Half Adder''' schematic.

Click on '''Tools'''>>

click on '''Library Editor'''

||Click on the '''Library Editor''' icon from the top toolbar.

The schematic window of the '''Part Library''' Editor opens up.

You can also find the '''Library Editor''' option from the '''Tools''' option on the top menu.

|-
||'''Part Library Editor window:'''
Click on '''File'''>>

click on '''Current Library'''>>

choose '''eSim_Subckt'''>>

click '''OK'''

||Click on the '''File''' option from the top menu.

Click on the '''Current Library''' option.

Choose '''eSim''' underscore '''Subckt''' option.

Click on the '''OK''' button.

|-
||'''Part Library Editor window:'''
Hover the mouse on the top of the '''Part library''' editor window pointing '''/usr/share/kicad/library/eSim_Subckt'''

||The current library path of the library selected is displayed at the top of the '''Part Library''' editor window.

|-
||'''Part Library Editor window:'''
Click on '''Create a new Component'''

Enter the component details

||To create a new component, click on '''Create a new Component''' icon from the top toolbar.

A '''Component Properties''' window opens up.

Enter the following.

'''Component name''' as '''HA''' underscore '''new'''.

'''Default Reference Designator''' as '''X'''.

The ''designator''is different for each '''eSim''' component.
''D'' is used for ''Diode''.
''Q'' is used for ''BJT'' and so on.

Keep the default settings.

Click on the '''OK''' button in the window.

|-
||'''Part Library Editor window:'''
Place the cursor on text and press '''F1'''

||Press '''F1''' key to zoom in the ''schematic name'' and ''designator''.

You can add a '''rectangle''', '''circle''', '''arc''' or '''polygons''' as the component body.

|-
||'''Part Library Editor window:'''
Click on '''Add graphic rectangle to component body''' from right toolbar>>

click on editor

Click and drag >>

click and end

||I will add a ''rectangle'' as a component body.

Click on '''Add graphic rectangle to component body''' tool from the right toolbar.

Click on the ''editor''.

Click and drag the ''rectangle''.

Click again to end the ''rectangle'' body.

|-
||'''Part Library Editor window:'''
Place cursor on '''Ha_new''' and press ''M'' >>

||Arrange the designator and name of the component.

Place the cursor on the ''name'' and ''designator'' and press the key '''M'''.

|-
||'''Part Library Editor window:'''
Click on '''Add pins to component''' >>

click on the ''editor''.

||Now add input and output pins.

Click on '''Add pins to component''' tool from the right toolbar.

Click on the ''editor''.

'''Pin Properties''' window will appear.

|-
||'''Part Library Editor window:'''

Enter properties of '''pin A'''

||Enter:
'''Pin name''' as '''A'''.

'''Pin Number''' as '''1'''.

'''Orientation''' as '''Right'''.

'''Electrical Type''' as '''Input'''.

'''Graphic Style''' as '''Line'''.

Click on the '''OK''' button in the window.

The pin is tied to the cursor. Connect it as shown.

|-
||Part Library Editor:
Click on editor

Add '''Pin 2''' properties.

||Click on the ''editor'' again.

In a similar way, add '''Pin number 2''' with '''Pin name''' as '''B'''.

|-
||'''Part Library Editor:'''

Click on editor

Add '''Pin 3''' properties.

||Click again on the ''editor''.

Enter the following.

'''Pin name''' as '''Sum'''.

'''Pin Number''' as '''3'''.

'''Orientation''' as '''left'''.

'''Electrical Type''' as '''output'''.

'''Graphic Style''' as '''Line'''.

Click on the '''OK''' button.

|-
||'''Part Library Editor:'''
Add '''Pin 4''' properties.

||In a similar way add '''Pin number 4''' with '''Pin name Cy'''.

|-
||'''Part Library Editor window:'''

Click on '''File''' >>

click on '''Save Current Library'''

Click '''Yes''' >>

Click '''Yes'''

||Let us ''save'' the schematic symbol.

Click on '''File''' option from the top menu.

Click on the '''Save Current Library''' option.

Click the '''Yes''' button in the '''confirmation''' box.

You can see here, the component is added to '''eSim''' underscore '''Subcircuit''' library.

Click once again the '''Yes''' button in the '''confirmation''' box.

|-
||'''Part Library Editor window:'''
Click on '''File''' from top menu>>

choose '''Quit'''

||Close the '''Part Library''' editor window.

|-
||'''eSim_Subciruit library file:'''

||The '''eSim''' underscore '''Subckt''' library file is found in the '''Kicad''' library as shown here.

As you can see the component '''HA''' underscore '''new''' is defined here.

If you want to ''delete'' any component, you can also delete the component in this file.

|-
||'''eSim Main Window:'''

||Now we can verify the created ''Subcircuit'' and its component schematic.

You can use the '''Half Adder''' example project from the '''eSim''' ''Examples'' folder or create a new project.

|-
||'''Slide Show:'''
Code File

||You can also download the example '''HA''' underscore '''Test''' from the '''Code''' file section.

You can verify the component and subcircuit created.

|-
||'''eSim Main Window:'''
Adding '''HA''' underscore '''Test'''.

||I have created a new project '''HA''' underscore '''Test'''.

The project is already added to '''eSim''' windows under the '''Project''' section.

Select '''HA test''' and click on the '''Open schematic''' button from the left toolbar.

|-
||'''eSim Schematic editor:'''
Open the schematic of '''HA''' underscore '''Test'''

||It directs us to the '''eSim''' schematic window.

You can see, the '''HA''' underscore '''new''' component will be present under '''eSim_Subckt''' library.

|-
||'''eSim Main Window:'''
Analyzing the '''HA_test''' project

||Let us go back to the '''eSim''' window.

In the '''Kicad to Ngspice''' analysis tab, I have already specified '''transient''' parameters.

In the '''Source details''' tab, the '''voltage sources''' are assigned as '''5''' volts.

In the '''Subcircuit''' tab, the path of the '''Halfadder''' underscore '''new''' is added.

|-
||'''Ngspice window:'''

||You can see the '''Ngspice''' ''plots'' and ''terminal''.

Since both the inputs are '''5''' volts, '''Sum''' will be '''0''' and '''carry''' will be '''5''' volts.

You can also see the values in the '''Ngspice''' terminal.

Close the '''Ngspice''' terminal and plots.

|-
||'''Python window:'''

||In the '''Python''' plot window, check the '''Sum''' and '''Cy''' node.

Click on the '''Plot''' button.

The '''sum''' is '''0''' volts and '''Carry''' is '''5''' volts.

Close the '''Python''' plot window.

|-
||'''Show Slide:'''
Summary

||In this tutorial, we learnt how to,
*Create a '''Subcircuit''' and
*Create a '''Component Schematic'''.

|-
||'''Show Slide:'''
Forum to answer questions

https://forums.spoken-tutorial.org/

||Do you have questions in this '''Spoken Tutorial'''?

Choose the minute and second where you have the question.

Explain your question briefly.

Someone from the '''FOSSEE''' team will answer them.

Please visit this site.

|-
||'''Show Slide:'''
FOSSEE Forum

https://forums.fossee.in/

||For any general or technical questions on '''eSim''', visit the '''FOSSEE''' forum and post your question.

|-
||'''Show Slide:'''
Circuit Simulation

https://esim.fossee.in/circuit-simulation-project

||The '''FOSSEE''' team coordinates the '''Circuit Simulation''' project.

We give '''Certificates''' and '''Honorarium''' to the contributors.

For more details, please visit this site:

|-
||'''Show Slide:'''
Lab Migration

https://esim.fossee.in/lab-migration-project

||The '''FOSSEE''' team coordinates the '''Lab Migration''' project.

For more details, please visit this site.

|-
||'''Show Slide:'''
Acknowledgment

http://spoken-tutorial.org

||'''Spoken Tutorial''' Project is funded by '''NMEICT''', '''MHRD''', '''Govt. of India'''.

For more details, visit this site.

|-
||'''Thank you slide'''

||This is Gloria N from IIT Bombay signing off.

Thank you

@@ Line 32: / Line 32: @@
 ||'''Show Slide:'''
 Pre-requisites
-||To practice this tutorial, you should know how to create and simulate a circuit in'''eSim'''.
+||To practice this tutorial, you should know how to create and simulate a circuit in '''eSim'''.
 If not, watch the prerequisite '''eSim''' tutorials on this website.

← Older revision		Revision as of 11:16, 5 August 2020
Line 628:		Line 628:

	\|\|Do you have questions in this '''Spoken Tutorial'''?		\|\|Do you have questions in this '''Spoken Tutorial'''?
−
−	~~Choose the minute and second where you have the question.~~
−
−	~~Explain your question briefly.~~
−
−	~~Someone from the '''FOSSEE''' team will answer them.~~

	Please visit this site.		Please visit this site.

@@ Line 649: / Line 649: @@
 We give '''Certificates''' and '''Honorarium''' to the contributors.
-For more details, please visit this site:
+For more details, please visit this site.
 |-

ESim/C2/Subcircuit-Builder/English - Revision history

Nancyvarkey at 11:27, 7 August 2020

Glorianandihal at 19:04, 5 August 2020

Glorianandihal at 19:04, 5 August 2020

Glorianandihal at 18:32, 5 August 2020

Glorianandihal at 11:16, 5 August 2020

Glorianandihal: Created page with "'''Subcircuit Builder in eSim''' '''Author: Gloria N ''' '''Keywords: eSim, Subcircuit, KiCad, Eeschema, Subcircuit, Part library, Schematic, Half adder, Subcircuit, Pin, Po..."