DWSIM/C3/Custom-Unit-Operation-using-Scilab/English - Revision history

Nancyvarkey at 03:51, 10 May 2019

2019-05-10T03:51:18Z

Show changes

Kaushik Datta at 09:51, 1 May 2019

2019-05-01T09:51:01Z

Kaushik Datta at 06:39, 1 May 2019

2019-05-01T06:39:41Z

Kaushik Datta: Created page with " {|border=1 ||'''Visual Cue''' ||'''Narration''' |- ||'''Slide Number 1''' Title Slide''' ||Welcome to this tutorial on simulating a '''Custom Unit Operation''' using '''..."

2019-04-30T11:39:02Z

Created page with " {|border=1 ||'''Visual Cue''' ||'''Narration''' |- ||'''Slide Number 1''' Title Slide''' ||Welcome to this tutorial on simulating a '''Custom Unit Operation''' using '''..."

New page

{|border=1
||'''Visual Cue'''
||'''Narration'''

|-
||'''Slide Number 1'''

Title Slide'''
||Welcome to this tutorial on simulating a '''Custom Unit Operation''' using '''Scilab.'''

|-
||'''Slide Number 2'''

'''Learning Objective'''
||In this tutorial, we will learn to:

* Create a custom unit operation using '''Scilab'''
* Calculate the '''Outlet pressure '''of '''product stream'''
* Calculate '''Molar flow rate '''and''' Enthalpy'''
|-
||'''Slide Number 3'''

'''System Requirements'''
||To record this tutorial, I am using

* '''DWSIM 5. 6 update 8''' '''(Classic UI) '''and
* '''Windows 10'''

But, this process is identical in '''Linux, Mac OS X '''or '''FOSSEE OS on ARM'''.

|-
||'''Slide Number 4'''

'''Pre-requisites'''
||To practice this tutorial, you should know to-

* Add components to a '''flowsheet'''
* Select '''thermodynamic packages'''
* Add '''material streams''' and specify their properties
|-
||'''Slide Number 5'''

'''Prerequisite Tutorials and Files'''

||The prerequisite tutorials are available on our website.

'''Spoken-tutorial.org.'''

You can access these tutorials and all the associated files from this site.

You should also have '''Scilab 5.02 '''(or higher)''' '''installed on your system.

|-
||'''Slide Number 6'''

'''Scilab CAPE-OPEN Unit Operation'''
||First let us learn what is '''Scilab CAPE-OPEN Unit Operation'''.

It is an '''unit operation '''implementation for which the calculations can be entered in '''Scilab'''.

More information on this is given in the '''Additional reading material''' link of this tutorial.

|-
||'''Slide Number 7'''

'''Components:''' Water, methanol and Ethanol

'''Property Package:''' Raoult’s Law

'''Outlet Pressure''': Average of Inlet Stream
||We will develop a '''flowsheet''' to determine the '''product stream Temperature, Pressure,'''

'''Molar flow rate '''and '''Molar enthalpy '''from a '''Mixer''' model created using '''Scilab'''.
|-
|| '''Slide Number 8'''

'''Inlet Stream 1:'''

Component: Pure Water

Temperature: 300 K

Pressure: 100000 Pa

Mass flow: 10 kg/s

'''Inlet Stream 2:'''

Component: Pure Methanol

Temperature: 305 K

Pressure: 150000 Pa

Mass flow: 15 kg/s

'''Inlet Stream 3:'''

Component: Pure Ethanol

Temperature: 310 K

Pressure: 200000 Pa

Mass flow: 20 kg/s
|| Here we give '''Inlet Stream Conditions''' of the product stream'''.'''

|-
||
||Now let me open '''DWSIM (Classic UI).'''

|-
||Cursor to '''Desktop'''

'''DWSIM (Classic UI)''' >> '''Run as Administrator.'''
||To open '''DWSIM''', go to the''' Desktop'''.

Right-click on '''DWSIM (Classic UI)''' and click '''Run as Administrator.'''

|-
||'''User Control Window >> Yes '''
||Click '''Yes''' on '''User Access Control''' window.

|-
|| Point to '''Welcome to DWSIM''' window
|| '''Welcome to DWSIM''' window opens.

Close this window.

|-
||'''File >> New Steady-state Simulation.'''
||Now go to the '''File''' menu and select '''New Steady-state Simulation.'''

|-
||Point to''' Simulation Configuration Wizard''' window.
||'''Simulation Configuration Wizard''' window appears.

|-
||Click on '''Next '''button.

||At the bottom, click on the '''Next '''button.

|-
||Type '''Water '''in the '''Search''' tab

'''ChemSep '''database >> '''Water'''
||In the '''Compounds search''' tab, type '''Water.'''

Select '''Water '''from the '''ChemSep database'''.

|-
||Type '''Methanol '''in the '''Search''' tab
||Similarly, add '''Methanol.'''

|-
||Type '''Ethanol '''in the '''Search''' tab
||Followed by '''Ethanol.'''

|-
||Click on '''Next.'''
||And then click on the '''Next''' button at the bottom.

|-
||Point to '''Property Packages'''
||The '''Property Packages '''window opens.

|-
||'''Property Packages''' >> '''Available Property Package'''

Double click on '''Raoult’s Law '''
||From '''Available Property Package''' list, double-click on '''Raoult’s Law.'''

|-
||Click on '''Next.'''
||Then click on the '''Next '''button.

|-
||Point to '''System of Units'''
||The next option after this, is '''System of Units.'''

|-
||'''System of Units >> SI'''
||Under '''System of Units, '''select '''SI'''.

|-
||Click on '''Finish.'''
||Click on the '''Finish '''button at the bottom.

|-
||Click on '''Maximize''' button.
||Let us now maximize the simulation window.

|-
||Cursor on the simulation window.

||Let’s insert the '''feed streams''' that enter the '''Custom Mixer'''.

|-
||Point to '''Streams.'''
||Go to '''Streams '''tab, at the bottom of the main simulation.

|-
||Click and drag '''Material '''Streams''' '''to the flowsheet
||From the displayed list, drag and drop three '''Material Streams''' to the '''Flowsheet'''.

|-
||Click '''MSTR-000'''
||Click on the first material stream named as '''MSTR-000'''

|-
||Type '''Water'''
||Let’s change the name of this '''stream''' to '''Water.'''

|-
||
||Now we will specify the '''Water stream''' properties.

|-
||Point to input data.
||Go to '''Input Data.'''

|-
||'''Stream Conditions '''>> '''Flash Spec''' >>''' Temperature and Pressure (TP)'''
||Under '''Stream Conditions '''tab, select '''Flash Spec''' as '''Temperature and Pressure (TP).'''

By default, '''Temperature '''and''' Pressure '''should already be selected as '''Flash Spec.'''

|-
||'''Stream Conditions '''>>'''Temperature '''>> '''300 K'''

Press '''Enter'''
||Change '''Temperature''' to '''300 K''' and press '''Enter.'''

|-
||'''Stream Conditions >> Pressure >> 100000 Pa'''

Press '''Enter'''
||Change '''Pressure''' to '''100000 Pa''' and press '''Enter.'''

|-
||'''Stream Conditions >> Mass Flow >> 10 kg/s'''

Press '''Enter'''
||Change '''Mass Flow''' to '''10 kg/s''' and press '''Enter.'''

|-
||'''Input Data '''>>''' Compound Amounts'''
||Now let us specify the '''Water stream compositions.'''

For this, click on '''Compound Amounts''' tab under '''Input Data.'''

|-
||'''Basis >> Mole Fractions'''
||Choose the '''Basis''' as '''Mole Fractions''', if not already selected.

By default, '''Mole Fractions''' is already selected as '''Basis.'''

|-
||'''Water: 1'''
||Now for '''Water''', enter the '''Amount''' as '''1''' and press '''Enter.'''

|-
||'''Methanol: 0'''
||For '''Methanol, '''enter '''0''' and press '''Enter'''.

|-
||'''Ethanol: 0'''
||For '''Ethanol, '''enter '''0''' and press '''Enter'''.

|-
||Click '''Accept Changes '''button
||On the right, click on '''Accept Changes''' button.

|-
||
||Similarly, we will define the other two '''material streams.'''

|-
||Click '''MSTR-001'''
||Click on the second '''material stream''' named '''MSTR-001.'''

|-
||Type '''Methanol'''
||Let’s change the name of this '''stream''' to '''Methanol.'''

|-
||
||Now we will specify the '''Methanol stream''' properties.

|-
||'''Stream Conditions >> Flash Spec >> Temperature and Pressure (TP)'''
||Go to '''Input Data.'''

Under '''Stream Conditions tab''', select '''Flash Spec''' as '''Temperature and Pressure (TP).'''

|-
||'''Stream Conditions >>Temperature >> 305 K'''

Press '''Enter'''
||Change '''Temperature''' to '''305 K''' and press '''Enter.'''

|-
||'''Stream Conditions >> Pressure >> 150000 Pa'''

Press '''Enter'''
||Change '''Pressure''' to '''150000 Pa''' and press '''Enter.'''

|-
||'''Stream Conditions >> Mass Flow >> 15 kg/s'''

Press '''Enter'''
||Change '''Mass Flow''' to '''15 kg/s''' and press '''Enter.'''

|-
||'''Input Data '''>>''' Compound Amounts'''
||Now click on the '''Compound Amounts''' tab under''' Input Data.'''

|-
||'''Basis >> Mole Fractions'''
||Choose '''Basis''' as '''Mole Fractions.'''

|-
||'''Water: 0'''
||Now for '''Water''', enter the '''Amount''' as '''0''' and press '''Enter.'''

|-
||'''Methanol: 1'''
||For '''Methanol, '''enter '''1''' and press '''Enter'''.

|-
||'''Ethanol: 0'''
||For '''Ethanol, '''enter '''0''' and press '''Enter'''.

|-
||Click '''Accept Changes '''button.
||On the right, click on '''Accept Changes''' button.

|-
||Click '''MSTR-002'''
||Now, click on the third '''material stream''' named as '''MSTR-002.'''

|-
||Type '''Ethanol'''
||Let’s change the name of this '''stream''' to '''Ethanol.'''

|-
||
||Now we will specify the '''Ethanol stream''' properties.

|-
||'''Stream Conditions >> Flash Spec >> Temperature and Pressure (TP)'''
||Go to '''Input Data.'''

Under '''Stream Conditions '''tab, select '''Flash Spec''' as '''Temperature and Pressure (TP)'''

|-
||'''Stream Conditions >>Temperature >> 310 K'''

Press '''Enter'''
||Change '''Temperature''' to '''310 K''' and press '''Enter.'''

|-
||'''Stream Conditions >> Pressure >> 200000 Pa'''

Press '''Enter'''
||Change '''Pressure''' to '''200000 Pa''' and press '''Enter.'''

|-
||'''Stream Conditions >> Mass Flow >> 20 kg/s'''

Press '''Enter'''
||Change '''Mass Flow''' to '''20 kg/s''' and press '''Enter.'''

|-
||'''Input Data '''>>''' Compound Amounts'''
||Then under '''Input Data '''click on '''Compound Amounts '''tab.

|-
||'''Basis >> Mole Fractions'''
||Choose '''Basis''' as '''Mole Fractions.'''

|-
||'''Water: 0'''
||For '''Water''', enter the '''Amount''' as '''0''' and press '''Enter.'''

|-
||'''Methanol: 0'''
||For '''Methanol, '''enter '''0''' and press '''Enter'''.

|-
||'''Ethanol: 1'''
||For '''Ethanol, '''enter '''1''' and press '''Enter'''.

|-
||Click '''Accept Changes '''button.
||On the right side, click on '''Accept Changes''' button.

|-
||
||Now, let us insert another '''material stream''' that exits the '''custom mixer'''.

|-
||Click and Drag '''Material Stream '''to the flowsheet
||To do that, let us drag one '''material stream '''to the flowsheet.

|-
||
||Let us arrange the '''streams'''.

|-
||
||We will leave that '''stream''' as unspecified.

|-
||Type '''Mixed Product'''
||Then we will change the name of this '''stream '''to '''Mixed Product.'''

|-
||Cursor to '''CAPE-OPEN '''tab
||At the bottom of the main simulation window, go to '''CAPE-OPEN '''tab.

|-
||Click and drag '''CAPE-OPEN Unit Operation''' to the flowsheet
||Drag and drop '''CAPE-OPEN Unit Operation''' to the '''flowsheet''' area.

|-
||Cursor to '''CAPE-OPEN Unit Operation '''window
||Add '''CAPE-OPEN Unit Operation '''window opens.

|-
||Point to '''SciLab Unit Operation.'''

Click on '''OK'''
||From the displayed list, select '''SciLab Unit Operation.'''

Click on '''OK '''at the bottom.

|-
||Type '''Custom Mixer'''.
||Let us change the name of this '''Unit Operation '''to '''Custom Mixer'''.

|-
||
||Now, we will create the '''inlet''' and '''outlet connection ports''' for the '''Custom Mixer'''.

|-
||Click '''Custom Mixer'''
||For this, click on '''Custom Mixer.'''

|-
||Click '''Open CAPE-OPEN Object Editor'''
||From '''Property Editor window, '''click on '''Open CAPE-OPEN Object Editor.'''

|-
||Point to '''Scilab CAPE-OPEN Unit Operation '''window
||'''Scilab CAPE-OPEN Unit Operation '''window opens.

|-
||Click on '''Ports''' tab.
||Click on '''Ports''' tab.

|-
||'''Feed ports >> Add'''
||Under '''Feed ports''', there is an '''Add''' button at the bottom.

|-
||Click on the '''Add''' button
||Click on '''Add''' button thrice to create three '''inlet ports''' for the three '''input material streams'''.

|-
||'''Product ports >> Add'''
||Under '''Product ports''', click on '''Add''' button at the bottom.

This will create an '''outlet port''' for the output '''material stream'''.

|-
||Click on '''Close '''button.
||Click on '''Close '''button at the bottom.

|-
||Point to '''Property Editor Window'''
||Go to the '''Property Editor Window'''.

|-
||Go to '''Connections.'''
||Under '''Connections, '''go to '''inlet''' tab.

|-
||Click on drop down arrow against '''Feed 1 '''Select '''Water.'''
||Click on the drop-down against '''Feed 1 '''and select '''Water.'''

|-
||Click on drop down arrow against '''Feed 2'''

Select '''Methanol.'''
||Next, click on the drop-down against '''Feed 2''' and select '''Methanol.'''

|-
||Click on drop down arrow against '''Feed 3'''

Select '''Ethanol.'''
||Next, click on the drop-down against '''Feed 3''' and select '''Ethanol.'''

|-
||Click on the '''Outlet''' tab.
||Now click on the '''Outlet''' tab.

|-
||Click on drop down arrow against '''Product 1'''

Select '''Mixed Product.'''
||Click on the drop-down against '''Product 1 '''and

select '''Mixed Product.'''

|-
||Point to all the connections.
||All the connections now are complete.

Now we will write the code to perform the computation.

|-
||Click on '''Open CAPE-OPEN Object Editor'''
||Click on '''Open CAPE-OPEN Object Editor.'''

|-
||Click on '''SciLab''' tab.
||Click on '''SciLab''' tab.

|-
||Cursor on the interface.
||First we will get the '''feed properties''' of the '''material streams'''.

Then we will write the '''calculation routines'''.

|-
||Type:

'''f1=getFeedProp(1,"flow")'''

'''f2=getFeedProp(2,"flow")'''

'''f3=getFeedProp(3,"flow")'''
||Type this code in the '''Script '''tab.

This is to read the '''molar flow rate''' of the '''compounds''' from the '''inlet material '''streams.

|-
||Cursor to '''f1, f2''' and '''f3 '''variables.
||Here,''' f1, f2''' and '''f3 '''are the variables.

They store '''molar flow rate''' of the '''compounds''' from the '''input material''' streams.

|-
||Cursor to '''getFeedProp '''command
||'''getFeedProp''' is the command used to read the specified '''feed property'''.

|-
||Cursor to '''1, 2''' and '''3''' feed port numbers
||'''1, 2''' and '''3''' are the '''feed port numbers''' in '''SciLab''' to which the '''material '''streams in '''DWSIM''' is connected.

|-
||Cursor to '''flow''' keyword
||'''flow''' is the keyword.

'''flow''' indicates that '''components''' in the streams, has to be stored in''' f1,f2,f3''' in form of an '''array'''.

|-
||Type:

'''h1=getFeedProp(1,"enthalpy")'''

'''h2=getFeedProp(2,"enthalpy")'''

'''h3=getFeedProp(3,"enthalpy")'''
||Type this code in the '''Script''' tab.

This is to read the '''molar enthalpy''' of the '''inlet '''streams from the added '''inlet material '''stream.

Here, variables''' h1, h2''' and '''h3''' store the '''molar enthalpy''' of the added '''input material''' streams'''.'''

|-
||Cursor to '''enthalpy''' keyword
||'''enthalpy''' is the keyword.

It indicate that '''molar enthalpy''' of '''material '''streams has to be stored in '''h1, h2''' and '''h3'''.

|-
||Type:

'''p1=getFeedProp(1,"pressure")'''

'''p2=getFeedProp(2,"pressure")'''

'''p3=getFeedProp(3,"pressure")'''
||Next, type this code.

This is to read the '''pressure''' of the '''inlet''' streams from the added '''inlet material '''stream.

Here, variables''' p1, p2''' and '''p3''' store the '''pressures''' of '''Water, Methanol''' and '''Ethanol '''streams.

|-
||Cursor to '''pressure''' keyword
||'''pressure''' is the keyword.

It indicates that the '''pressure''' of '''material''' streams has to be stored in the variables''' p1, p2''' and '''p3'''.

|-
||
||Now we will code the '''calculation routine'''

|-
||
||First we will calculate the '''outlet pressure'''.

For this let us consider the '''outlet pressure''' to be '''average pressure''' of all the '''3 inlet '''streams.

|-
||'''p=(p1+p2+p3)/3'''
||Now, type this code.

'''Outlet pressure''' is calculated and stored in the variable''' p.'''

|-
||
||Now we will calculate the '''molar flow rate''' of the compounds in the '''output '''stream.

|-
||'''f=f1+f2+f3'''
||Type this code in the '''Script '''tab.

'''Molar flow rate''' of '''compounds''' in the '''product '''stream is calculated.

It is stored in the variable''' f''' in form of an '''array'''.

|-
||
||Now we will calculate the total '''molar flow rate''' of the '''product '''stream.

|-
||'''totF=sum(f)'''
||Type this code in the '''Script''' tab.

'''Molar flow rate '''of '''product '''stream is calculated and stored in the variable''' totF'''.

|-
||
||Now we will calculate the '''enthalpy''' of the '''product '''stream'''.'''

|-
||'''h=((h1*f1)+(h2*f2)+(h3*f3))/f'''
||Type this code.

'''Enthalpy''' of the '''product''' stream is calculated and stored in the variable''' h'''.

|-
||
||Now we will pass the '''calculated variables''' to the '''Mixed Product material '''stream.

|-
||'''setProduct(1,totF,f/totF,"pressure",p,"enthalpy",h)'''
||Type this code.

'''setProduct''' indicates that, variables in the braces are to be passed to the stream in the '''product'''.

|-
||Click '''Test'''
||At the bottom, click '''Test.'''

|-
||Point to the '''Output''' window
||Wait for a few seconds for '''Scilab script''' to be executed and display the results in the '''Output''' tab.

|-
||Point to the tabs.
||'''Values''' stored and calculated in all the variables are displayed in the '''Output''' tab.

|-
||Click '''Close''' button.
||Click '''Close '''button at the bottom.

|-
||
||Now we will run the '''simulation.'''

|-
||Click '''Solve Flowsheet'''
||So, from the toolbar, click on '''Solve Flowsheet''' button.

|-
||Click '''Mixed Product'''
||When the calculations are completed, click on the '''Mixed Product '''in the '''flowsheet'''.

|-
||Point to '''Property Editor Window'''

Hover mouse at '''Input Data'''
||Under '''Stream Conditions,''' check '''Temperature''', '''Pressure''', '''Molar Flow'''.

|-
||'''Insert >> Master Property Table'''
||Now, go to '''Insert''' menu and select '''Master Property Table.'''

|-
||Double click on '''Master Property Table'''
||Double-click on the '''Master Property Table.'''

|-
||Point to '''Configure Master Property Table'''
||'''Configure Master Property Table''' window opens.

|-
||Type '''Stream Wise Results – Custom Mixer.'''
||Enter '''Name''' as '''Stream Wise Results – Custom Mixer.'''

|-
||Type '''Material Stream'''
||Enter '''Object Type''' as '''Material Stream'''.

By default, '''Material Stream''' is already selected.

So we will not change it.

|-
||'''Object >> Liquid Product, Vapour Product '''and '''Feed'''
||Under '''Properties to display''', select '''Object''' as '''Water''', '''Methanol''', '''Ethanol '''and '''Mixed Product.'''

|-
||'''Configure Master Property Table>> Property'''
||Under '''Property, '''scroll down to see all the parameters.

Now select the properties as:

'''Temperature'''

'''Pressure'''

'''Mass Flow'''

'''Molar Flow'''

'''Vapor Phase Molar Fraction'''

'''Molar Fraction (Mixture) / Water'''

'''Molar Flow (Mixture) / Water'''

'''Molar Fraction (Mixture) / Methanol'''

'''Molar Flow (Mixture) / Methanol'''

'''Molar Fraction (Mixture) / Ethanol'''

'''Molar Flow (Mixture) / Ethanol'''

|-
||Close '''Configure Master Property Table''' window.
||Let’s close this window.

|-
||Point to the '''Master Property Table'''

Point to '''Liquid Product''' stream
||Move the '''Master Property Table''' for better visibility.

Here we can see the corresponding results for '''Water, Methanol, Ethanol''' and '''Mixed Product.'''

|-
||
||Let's summarize.

|-
||'''Slide Number 9'''

'''Summary'''
||In this tutorial, we have learnt to

* Create a '''custom unit operation''' using''' Scilab'''
* Calculate the '''Outlet pressure '''of '''product stream'''
* Calculate '''Molar flow rate '''and''' Enthalpy'''

|-
||'''Slide Number 10'''

'''Assignment'''

'''Compounds:'''

'''Water''' – 100 kmol/h

'''Methanol''' – 100 kmol/h

'''Pressure''' – 1.25 atm

'''Property Package: '''Raoult’s Law

'''Inlet Stream Temperature:''' 300 K

'''Temperature Difference:''' 350 K

'''Pressure Drop:''' 1.1 atm

||As an assignment,

Create a custom model for a '''heater''' to heat the given mixture of compounds.

Calculate the amount of heat required for heating.

Compare the results with in-built '''heater''' unit operation available.

|-
||'''Slide Number 11'''

'''About the Spoken Tutorial Project'''
||Watch the video available at following link.

http://spoken-tutorial.org/

It summarizes the Spoken Tutorial project.

|-
||'''Slide Number 12'''

'''Spoken Tutorial Workshops'''
||The Spoken Tutorial Project Team

* Conducts workshops and
* Gives certificates.
* For more details, please write to us.
|-
||'''Slide Number 13'''

'''Forum Slide'''

Do you have questions in this '''Spoken Tutorial?'''

Please visit this site

Choose the minute and second where you have the question.

Explain your question briefly.

Someone from the FOSSEE team will answer them.
||Please post your times queries in this forum.

|-
||'''Slide Number 14'''

'''DWSIM Flowsheeting Project'''
||The '''FOSSEE''' team coordinates conversion of existing flow sheets into '''DWSIM.'''

We give honorarium and certificates.

For more details, please visit this site.

|-
||'''Slide Number 15'''

'''TextBook Companion Project'''
||The '''FOSSEE''' team coordinates coding of solved examples of popular books.

We give honorarium and certificates.

For more details, please visit this site.

|-
||'''Slide Number 16'''

'''Lab Migration Project'''
||The '''FOSSEE''' team helps migrate commercial simulator labs to '''DWSIM.'''

We give honorarium and certificates.

For more details, please visit this site.

|-
||'''Slide Number 17'''

'''Acknowledgements'''
||'''Spoken Tutorial''' and '''FOSSEE''' projects are funded by '''NMEICT, MHRD''', Government of India.

|-
||'''Slide Number 18'''

'''Thanks'''
||This tutorial is contributed by Kaushik Datta and Priyam Nayak. Thanks for joining.

|}

@@ Line 749: / Line 749: @@
 Hover mouse at '''Input Data'''
 ||Under '''Stream Conditions,''' check '''Temperature''', '''Pressure''', '''Molar Flow'''.
 |-
 ||

@@ Line 142: / Line 142: @@
 Right-click on '''DWSIM (Classic UI)''' and click '''Run as Administrator.'''
 |-
 || Point to '''Welcome to DWSIM''' window
 || '''Welcome to DWSIM''' window opens.
 Close this window.
@@ Line 198: / Line 193: @@
 Double click on '''Raoult’s Law '''
-||From '''Available Property Package''' list, double-click on '''Raoult’s Law.'''
+||From '''Available Property Packages''' list, double-click on '''Raoult’s Law.'''
 |-
 ||Click on '''Next.'''
-||Then click on the '''Next '''button.
+||Then click on the '''Next '''button at the bottom.
 |-
@@ Line 218: / Line 213: @@
 |-
 ||Click on '''Maximize''' button.
-||Let us now maximize the simulation window.
+||Let us maximize the simulation window.
 |-
@@ Line 302: / Line 297: @@
 |-
 ||Click '''Accept Changes '''button
-||On the right, click on '''Accept Changes''' button.
+||On the right, click on the '''Accept Changes''' button.
 |-
@@ Line 367: / Line 362: @@
 |-
 ||Click '''Accept Changes '''button.
-||On the right, click on '''Accept Changes''' button.
+||On the right, click on the '''Accept Changes''' button.
 |-
@@ Line 428: / Line 423: @@
 |-
 ||Click '''Accept Changes '''button.
-||On the right side, click on '''Accept Changes''' button.
+||On the right side, click on the '''Accept Changes''' button.
 |-
@@ Line 440: / Line 435: @@
 |-
 ||
-||Let us arrange the '''streams'''.
+||Let us arrange the '''stream'''.
 |-
@@ Line 513: / Line 508: @@
 |-
 ||Click on '''Close '''button.
-||Click on '''Close '''button at the bottom.
+||Click on the '''Close '''button at the bottom.
 |-
 ||Point to '''Property Editor Window'''
-||Go to the '''Property Editor Window'''.
+||Go to '''Property Editor Window'''.
 |-
@@ Line 556: / Line 551: @@
 |-
 ||Point to all the connections.
-||All the connections now are complete.
+||All the connections now are completed.
@@ Line 727: / Line 722: @@
 ||Click '''Test'''
 ||At the bottom, click '''Test.'''
 |-
@@ Line 875: / Line 866: @@
 ||As an assignment,
@@ Line 880: / Line 873: @@
-Compare the results with in-built '''heater''' unit operation available.
 |-