Script | Spoken-Tutorial - User contributions [en]

OpenFOAM/C3/Exporting-geometry-from-Salome-to-OpenFOAM/English

2013-06-28T11:06:19Z

P12575: Created page with 'Tutorial: Exporting geometry from Salome to OpenFOAM. Script and Narration : Saurabh S. Sawant Keywords: Video tutorial,CFD. {| style="border-spacing:0;" | style="border-…'

Tutorial: Exporting geometry from Salome to OpenFOAM.

Script and Narration : Saurabh S. Sawant

Keywords: Video tutorial,CFD.

{| style="border-spacing:0;"
| style="border-top:0.05pt solid #000000;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| <center>Visual Cue</center>
| style="border:0.05pt solid #000000;padding:0.097cm;"| <center>Narration</center>

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 1: Title

Play the slide
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Hello and welcome to the spoken tutorial on '''Exporting the geometry from Salome to OpenFOAM.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 2 : Learning Objectives

Play the slide
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| In this tutorial we will see:

'''Group''' the '''meshed geometry parts '''in '''''Salome.'''''

'''Export '''the '''geometry '''to '''''OpenFOAM.'''''

Create a '''case directory''' for '''simulation.'''

View the '''geometry''' in '''''ParaView.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 3: System Requirement

Play the slide

| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| To '''record '''this tutorial,

I am using '''Linux operating system ''Ubuntu'' 12.10'''

'''''OpenFOAM'' version''' '''2.1.1'' '''''

'''''ParaView'' version''' '''3.12.0 '''

'''''Salome'' version 6.6.0'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 4:Prerequisites

Play the slide
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| To practice this''' tutorial''' the learner should first perform the tutorial on,

'''Creating and meshing a Curved-Pipe Geometry in Salome.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Open '''Salome.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Open '''''Salome''''' as shown in the previous '''tutorial.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Go to''' file>>Open'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Go to''' file>>Open'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Go to''' Desktop.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Go to''' Desktop.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on '''''Curved-geometry.hdf.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on '''''Curved-geometry.hdf.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Press '''''Open.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Press '''''Open.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Go to '''mesh-module''' from the''' ''modules ''toolbar.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Go to '''mesh-module''' from the''' ''modules ''toolbar.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Open the''' mesh tree''' from the''' ''object browser.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Open the''' mesh tree''' from the''' ''object browser.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Right click on''' Mesh_1 '''and''' '''click on''' Show.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Right click on''' Mesh_1 '''and''' '''click on''' Show.'''

The''' mesh''' on the '''geometry''' is visible.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Close the '''''python console''''' '''window'''.
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Let me close the '''''python console''''' '''window'''.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now we have to name the the '''meshed geometry parts '''as we require it in''''' OpenFOAM.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Right click on ''Mesh_1''''' and click on '''''Create Group''.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| To create '''''Groups''''' on this '''mesh''',''' right click on ''Mesh_1''''' and click on '''''Create Group''.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select the '''''element type'' '''as '''''Face.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Select the '''''element type'' '''as '''''Face.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select the '''''group type''' ''as '''''Group on Geometry'''.''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Select the '''''group type''' ''as '''''Group on Geometry'''.''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on the '''button''' in front of'' '''Geometrical Object '''''and select '''''Direct Geometrical Selection.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on the '''button''' in front of'' '''Geometrical Object '''''and select '''''Direct Geometrical Selection.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Open the''' geometry tree '''in the''' object browser. '''

Open the''' ''pipe_1'' tree.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Open the''' geometry tree '''in the''' object browser. '''

Open the''' ''pipe_1'' tree.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select the''' ''inlet ''group''' in the '''geometry tree''' that we had created in the previous tutorial.
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Select the''' ''inlet ''group''' in the '''geometry tree''' that we had created in the previous tutorial.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select the color as red.
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| You can select the color as red.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Name the '''group''' as '''''inlet.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Name the '''group''' as '''''inlet.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on '''''Apply and close.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on '''''Apply and close.'''''

'''''inlet group is seen in the tree.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Create the '''''outlet ''group.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Similarly, create the '''''outlet ''group.'''

I have created '''''outlet'' group.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Right click on '''''mesh_1''''' and click on '''''create group.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now to create the''' group''' of the whole '''outer surface,''' right click on '''''mesh_1''''' and click on '''''create group.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Select ''Element Type'' '''as '''''Face '''''and the '''''Group Type '''as''' Group on filter.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Select ''Element Type'' '''as '''''Face '''''and the '''''Group Type '''as''' Group on filter.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on''' ''Set filter.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on''' ''Set filter.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on the '''''Add'' button.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on the '''''Add'' button.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on '''''Apply and Close.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on '''''Apply and Close.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Change the color to blue.
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| You can change the color to blue.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on '''''Apply and Close.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Again click on '''''Apply and Close.'''''

'''''Group_1''' ''has been created.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| In the'' '''mesh menu''', ''click on '''''cut groups.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now, in the'' '''mesh menu''', ''click on '''''cut groups.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select the '''''main object''''' as '''''Group_2''''' and'' '''tool object''' ''as '''''inlet''.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Select the '''''main object''''' as '''''Group_2''''' and'' '''tool object''' ''as '''''inlet''.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Hold the''' shift key''' and also select the '''''tool object'' '''as'' '''outlet.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Hold the''' shift key''' and also select the '''''tool object'' '''as'' '''outlet.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Name the''' ''result name''''' as''' '''walls'.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Name the''' ''result name''''' as''' '''walls'.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| ''Select the color as purple.''

and click on '''''Apply and Close.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| ''You can select the color as purple.''

and click on '''''Apply and Close.'''''

'''''We see the group, 'walls'.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Right click on the '''''Group_1'' '''and '''delete''' this '''group'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Right click on the '''''Group_1'' '''and '''delete''' this '''group''' as we do not want to see it in '''''OpenFOAM.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Save '''the work by clicking on''' ''save document ''option.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Save '''the work by clicking on''' ''save document ''option.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Right click on'' '''mesh_1. '''''Go to '''''Export>> Unv File.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now right click on'' '''mesh_1. '''''Go to '''''Export>> Unv File.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Name the file as '''''bentpipe'''.''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Name the file as '''''bentpipe'''.''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Save''' this '''file''' on the '''Desktop.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| I am '''saving''' this '''file''' on the '''Desktop.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| We see''' ''bentpipe.unv'' file''' on the''' desktop.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Create a''' folder '''named''' ''bentpipe '''''on the '''''desktop.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Create a''' folder '''named''' ''bentpipe '''''on the '''''desktop.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''move'' bentpipe.unv ''file '''to this''' folder.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now, '''move'' bentpipe.unv ''file '''to this''' folder.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Go to the '''''icoFoam ''folder''' in '''''OpenFOAM.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now, to perform simulation on this''' geometry '''in '''''OpenFOAM''''' using '''''icoFoam ''solver,'''

Go to the '''''icoFoam ''folder''' in '''''OpenFOAM.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| For the location of this '''folder''', go to the''' tutorial''' on '''''lid driven cavity.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Copy''' and '''Paste ''bentpipe'' folder '''from the''' desktop''' to this''''' icoFoam'' folder.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Copy''' and '''Paste ''bentpipe'' folder '''from the''' desktop''' to this''''' icoFoam'' folder.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''copy''' and '''paste''' the '''''system''''' '''folder''' from '''''cavity'' folder''' to this '''''bentpipe ''folder.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Also, '''copy''' and '''paste''' the '''''system''''' '''folder''' from '''''cavity'' folder''' to this '''''bentpipe ''folder.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Go inside the'' '''bentpipe ''folder '''throgh '''command terminal.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now, go inside the'' '''bentpipe ''folder '''throgh '''command terminal.'''

I am inside the''' ''bentpipe'' folder.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Type '''''ls''''' and press '''''Enter'''''.
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Type '''''ls''''' and press '''''Enter'''''. We can see the '''''system'' folder''' and the '''''bentpipe.unv ''file''.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| type '''''ideasUnvToFoam bentpipe.unv'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now, type '''''ideasUnvToFoam bentpipe.''(dot)''unv, '''''Note that '''U, T '''and '''F''' are''' capital.''' Press '''Enter.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Type '''''ls.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''''Type ls.'''''

We can see the''' ''constant'' folder '''has been created.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Type''' ''cd'' (space) ''Constant.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''''Type cd (space) Constant.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Type '''''cd ''(space) ''polyMesh.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Type '''''cd ''(space) ''polyMesh.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Type''' ''ls''. '''Press''' ''Enter.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Type''' ''ls''. '''Press''' ''Enter.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Come out of the '''''polyMesh''''' '''folder. '''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| We see that the '''geometry files '''have been created.

Come out of the '''''polyMesh''''' '''folder. '''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Come out of the '''''geometry''''' '''folder.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Come out of the '''''geometry''''' '''folder.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Type

'''''transformPoints (space) -'(0.01 0.01 0.01)' '''''and press''''' Enter.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now, to convert the '''geometry scale '''to '''centimeters''', type

'''''transformPoints (space) -'(0.01 0.01 0.01)' '''''and press''''' Enter.'''''

'''Geometry '''has been converted to''' centimeters.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Minimize''' the '''terminal.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Minimize''' the '''terminal.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Go inside the''' ''bentpipe'' folder.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Go inside the''' ''bentpipe'' folder.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Go inside''' ''constant ''folder.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Go inside''' ''constant ''folder.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| We see that the''' ''transportProperties ''file '''is not there.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Copy the '''''transportProperties ''file '''from the '''''cavity'' folder''' and '''save '''it inside the '''c''onstant'' folder.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Copy the '''''transportProperties ''file '''from the '''''cavity'' folder''' and '''save '''it inside the '''c''onstant'' folder.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Come out of the '''''constant'' folder.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now, come out of the '''''constant'' folder.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Copy the '''''0 ''(zero) folder '''from the '''''cavity ''folder.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| We need the '''''0 ''(zero)'' ''folder''' having '''''P''' ''and '''''U'' files.'''

Copy the '''''0 ''(zero) folder '''from the '''''cavity ''folder.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| I have copied the''' ''0 ''(zero) folder.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Go inside the '''''0 ''(zero) folder.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Go inside the '''''0 ''(zero) folder.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Open the''' ''p'' file'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Open the''' ''p'' file'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Make sure that you give '''boundary patches''' for '''''inlet, outlet''''' and '''''walls''''' as we had created in '''''Salome.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Erase'' movingWall ''and type'' inlet.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Erase'' movingWall ''and type'' inlet.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Erase'' fixedWall ''and type'' outlet.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Erase'' fixedWall ''and type'' outlet.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Erase'' frontAndBack'' and type ''walls.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Erase'' frontAndBack'' and type ''walls.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Save '''the''' file '''and '''Close '''the''' file.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Save '''the''' file '''and '''Close '''the''' file.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Make changes in'' '''U'' file.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Similarly,

Make changes in'' '''U'' file.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| For appropriate '''boundary conditions,'''

refer to the '''tutorial''' on '''''Hagen-Poiseuille flow.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| I have made the changes and given the appropriate '''boundary conditions'''.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| You may also make the changes in '''''transportProperties''''' and '''''ControlDict''''' files by refering to the '''tutorial '''on '''''Hagen-Poiseuille flow.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Close the''' ''Home Folder.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Let's ''close the''' Home Folder.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Go to''' terminal.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now, '''go to terminal.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Type''' ''paraFoam.'''''

| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Type''' ''paraFoam.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on '''''Apply '''''in the '''''Object Inspector Menu.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| This will open '''''ParaView'''''. Click on '''''Apply '''''in the '''''Object Inspector Menu.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| In the '''drop down menu '''click on '''''Surface with Edges.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| In the '''drop down menu '''click on '''''Surface with Edges.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Zoom in.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Lets have a '''closer view''' by''' zooming in.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| We see''' hexahedral mesh.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| We see the '''groups''' have been created as we had named it in '''''Salome- Inlet outlet and walls.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Volume '''inside the '''surface '''is automatically grouped as '''''internal mesh.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 11: Summary
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| In this '''tutorial''' we have learned:

How to''' group''' the '''meshed geometry parts '''in '''''Salome.'''''

How to''' export '''the '''geometry '''to '''''OpenFOAM.'''''

How to create a '''case directory''' for '''simulation.'''

And to view the '''geometry''' in '''''ParaView.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 12 : Assignment
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| For '''Assignment,'''

'''Run '''the simulation by making appropriate changes in the files as described.

'''Export '''the '''geometries''' that you have created on your own.

And '''run''' the '''simulations''' on those '''geometries.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 13 :

About Spoken tutorials
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| The video is available at the following URL:

http://spoken-tutorial.org/What_is_a_Spoken_Tutorial

It summarizes the Spoken Tutorial project.

If you do not have good bandwidth, you can download and watch it.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 14:

About Spoken tutorials
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| The Spoken Tutorial Project Team

-Conducts workshops using spoken tutorials

-Gives certificates to those who pass an online test

-For more details, contact@spoken-tutorial.org

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 15:

Acknowledgement

| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Spoken Tutorials are part of Talk to a Teacher project,

It is supported by the National Mission on Education through ICT, MHRD, Government of India.

This project is coordinated by http://spoken-tutorial

More information on this mission is available at, http://spoken-tutorial.org/NMEICT-Intro

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| I am Saurabh Sawant, from IIT Bombay, Thank you.

|}

OpenFOAM/C3/Creating-and-meshing-a-curved-pipe-geometry-in-Salome-for-OpenFOAM/English

2013-06-28T11:05:12Z

P12575: Created page with 'Tutorial: Creating and meshing a Curved-Pipe Geometry in Salome for OpenFOAM. Script and Narration : Saurabh S. Sawant Keywords: Video tutorial,CFD. {| style="border-spac…'

Tutorial: Creating and meshing a Curved-Pipe Geometry in Salome for OpenFOAM.

Script and Narration : Saurabh S. Sawant

Keywords: Video tutorial,CFD.

{| style="border-spacing:0;"
| style="border-top:0.05pt solid #000000;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| <center>Visual Cue</center>
| style="border:0.05pt solid #000000;padding:0.097cm;"| <center>Narration</center>

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 1: Title

Play the slide
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Hello and welcome to the spoken tutorial on '''Creating and meshing a Curved-Pipe Geometry in Salome for OpenFOAM.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 2 : Learning Objectives

Play the slide
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| In this '''tutorial''' we will see:

To create '''curved pipe geometry''' in '''''Salome.'''''

To '''mesh''' the '''geometry''' in the '''''Salome.'''''

To''''' ''modify '''the '''mesh '''using''' ''submesh.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 3: System Requirement

Play the slide

| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| To '''record '''this tutorial,

I am using '''Linux operating system ''Ubuntu'' 12.10'''

and

'''''Salome'' version 6.6.0'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 4:Prerequisites

Play the slide
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| To practice this '''tutorial''' the learner should have Salome installed on his computer, if not, you may refer to the''' tutorial''' on,

'''Downloading and Installing Salome.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Open '''''Salome'' software''' by clicking on the '''''Salome ''icon''' on the '''desktop.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Open '''''Salome'' software''' by clicking on the '''''Salome ''icon''' on the '''desktop.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on the '''''Geometry module '''''in the '''''Modules''''' '''bar.'''

| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on the '''''Geometry module '''''in the '''''Modules''''' '''bar.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on''' ''New.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on''' ''New.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on ''''''New Entity'''''' in the '''top''' '''menu bar.'''

| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Let's click on ''''''New Entity'''''' in the '''top''' '''menu bar.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| In the '''drop down options''', go to '''''basic'' '''and then '''''2d sketch'''.''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| In the '''drop down options''', go to '''''basic'' '''and then '''''2d sketch'''.''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Press '''''Apply.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| First '''Point''' is at '''zero zero''', by default.

Press '''''Apply.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Go to '''''second element type''''', '''''Arcs''.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now, Go to '''''second element type''''', '''''Arcs''.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select the '''''Type''''' as '''''Direction''''' and '''''Direction'' '''as '''''Tangent''.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Select the '''''Type''''' as '''''Direction''''' and '''''Direction'' '''as '''''Tangent''.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Type the '''''Radius''''' -10 and tbe '''''Angle''''' as 90. Press '''''Apply'''.''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| ''Type the '''Radius''' -10 and tbe '''Angle''' as 90. Press '''Apply'''.''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select the '''''first element type''''', '''''Lines'''.''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Then ''select the '''first element type''', '''Lines'''.''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select the'' '''Type'' '''as''' ''Direction '''''and '''''Direction''''' as'' '''Tangent.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Select the'' '''Type'' '''as''' ''Direction '''''and '''''Direction''''' as'' '''Tangent.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| In front of '''''length'',''' type 30.
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| In front of '''''length'',''' type 30.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Press '''''Apply''''' and then'' '''Close'''.''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Press '''''Apply''''' and then'' '''Close'''.''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Zoom in'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Let me '''zoom in''' for the close view.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Open the '''Geometry tree '''in the'' '''Object ''Browser.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Open the '''Geometry tree '''in the'' '''Object ''Browser.'''

We can see '''''sketch_1.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Check off '''to '''hide '''the''' sketch '''and '''check on''' to see it back.
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| You can '''check off '''to '''hide '''the''' sketch '''or '''check on''' to see it back.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Go to '''''New Entity>>Blocks>> Divided Disk.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now, Go to '''''New Entity>>Blocks>> Divided Disk.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select the '''orientation''' as '''''OZX''' a''nd type the '''''radius''' ''equal to '''1.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Select the '''orientation''' as '''''OZX''' a''nd type the '''''radius''' ''equal to '''1.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on ''''''Apply and Close'.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on ''''''Apply and Close'.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Go to '''''New Entity>> Generation>> Extrusion Along Path.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now, go to '''''New Entity>> Generation>> Extrusion Along Path.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select the '''''Base'' ''Object '''as '''Divided Disk_1'' '''

and '''Path Object''' as '''Sketch_1 '''from''' geometry tree.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Select the '''''Base'' ''Object '''as '''Divided Disk_1'' '''

and '''Path Object''' as '''Sketch_1 '''from''' geometry tree.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Press '''''Apply and Close.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Press '''''Apply and Close.'''''

'''''Pipe_1 ''object''' has been created in the '''geometry tree.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Go to '''''New Entity>>Explode.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''''Go to New Entity>>Explode.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select the '''''Main Object''''' as '''''Pipe_1.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Select the '''''Main Object''''' as '''''Pipe_1.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| In the '''''Sub-shapes''' '''Type'' drop down menu,''' select '''''Face.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| In the '''''Sub-shapes''' '''Type'' drop down menu,''' select '''''Face.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Check on''' '''''Select sub-shapes.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Check on''' '''''Select sub-shapes.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Zoom in '''by''' scrolling up.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Let me '''zoom in '''by''' scrolling up.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| I can''' rotate the object '''by clicking on this '''rotation menu.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Hold the left mouse button '''and move the''' mouse upward to rotate the object.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Hold the left mouse button '''and move the''' mouse upward to rotate the object.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Take the''' mouse pointer '''near the''' inlet face.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Take the''' mouse pointer '''as shown on the '''screen.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Hold the left mouse button.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Hold the left mouse button.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Drag the mouse '''so that all the '''inlet faces '''fall into the''' rectangular area.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Drag the mouse '''so that all the '''inlet faces '''fall into the''' rectangular area.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Release the mouse button.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Release the mouse button.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on''' ''Show only selected ''button.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on''' ''Show only selected ''button''' to ensure that all the '''inlet faces''' have been selected.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on '''''Apply and Close.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on '''''Apply and Close.'''''

We see five '''faces''' are created in the '''geometry tree.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on '''''New Entity>>Group>>Create.'''''

| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now, click on '''''New Entity>>Group>>Create.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select the''''' ''main shape '''as''''' Pipe_1 '''''from the''''' ''geometry tree.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Select the''''' ''main shape '''as''''' Pipe_1 '''''from the''''' ''geometry tree.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select the''' '''third''' Shape Type''',''''' ''Faces.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Select the''' '''third''' Shape Type''',''''' ''Faces.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select the newly created five '''faces '''from the''' geometry tree. Add''' them by clicking on''' ''Add ''button.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Then select the newly created five '''faces '''from the''' geometry tree. Add''' them by clicking on''' ''Add ''button.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Name the group as ''''''inlet'.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Name the group as ''''''inlet'.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Press '''Apply and close.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Press '''Apply and close.'''

We see''''' inlet ''group '''ha'''s been created.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Follow the similar procedure on the other end of the '''pipe''' and '''group''' those''' faces''' as''''' outlet.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Follow the similar procedure on the other end of the '''pipe''' and '''group''' those''' faces''' as''''' outlet.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| I have created the''' ''outlet ''group.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| In the '''''modules ''drop down menu '''select '''''Mesh.'''''

| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now, in the '''''modules ''drop down menu '''select '''''Mesh.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| In the '''top menu bar''', click on '''''Create Mesh.'''''

| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now, in the '''top menu bar''', click on '''''Create Mesh.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select the '''Geometry''' as''' ''Pipe_1''''' from the '''geometry tree.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Select the '''Geometry''' as''' ''Pipe_1''''' from the '''geometry tree.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on ''''''Assign a set of hypotheses' '''''and select ''''''3D: Automatic Hexahedralization'.'''''

| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on ''''''Assign a set of hypotheses' '''''and select ''''''3D: Automatic Hexahedralization'.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select the '''''Number of Segments''''' 12.

| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Select the '''''Number of Segments''''' 12.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on '''''OK.'''''

| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on '''''OK.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on '''''Apply and Close.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on '''''Apply and Close.'''''

We see''''' Mesh_1 '''''in the''' geometry tree.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Right click on '''''Mesh_1 '''''and click on''''' Compute.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Right click on '''''Mesh_1 '''''and click on''''' Compute.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| We see''''' ''Mesh '''has been created.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Zoom in'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Let me''' Zoom in.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Move''' the '''object '''by this '''''panning'' option.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| You can '''move''' the '''object '''by this '''''panning'' option.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Refine '''the '''mesh '''in the''' flow direction.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now we will '''refine '''the '''mesh '''in the''' flow direction.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Go back to the''' geometry module '''from '''''modules ''drop down menu'''.
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| To do so go back to the''' geometry module '''from '''''modules ''drop down menu'''.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Get the proper '''view''' by using '''''panning''''' and''''' rotation''''' '''option.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now, let me get the proper '''view''' by using '''''panning''''' and''''' rotation''''' '''option.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Go to New Entity>> Explode.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Go to New Entity>> Explode.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select the '''main object '''as '''Pipe_1.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Select the '''main object '''as '''Pipe_1.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select '''''sub-shapes''' '''Type, Edge.'''''

| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''''Sub-shapes''' '''Type, Edge.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Check''' '''on''' ''Select sub-shapes.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| ''Check''' '''on''' Select sub-shapes.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Move the '''window '''to the''' corner.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Let me move the '''window '''to the''' corner.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Take the '''mouse''' '''pointer '''near to the''' inlet.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now, take the '''mouse''' '''pointer as s'''hown on the '''screen.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Hold the '''left mouse button.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Hold the '''left mouse button.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Drag''' the '''mouse''' so that all the '''outlet edges''' fall inside the '''rectangular window.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Drag''' the '''mouse''' so that all the '''outlet edges''' fall inside the '''rectangular window.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Release left mouse button.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Release left mouse button.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| The selected '''edges''' would appear in '''white''' color.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on''''' hide selected''''' in the '''''Sub-shape selection''''' '''window.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Then, click on''''' hide selected''''' in the '''''Sub-shape selection''''' '''window.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Similarly, hide other 3 face edges.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Similarly, there are 3 more face edges that we need to select one by one and hide.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| After that, you would only see the''' edges''' in the '''flow direction.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select all of these '''edges '''using similar method and click on '''Apply and Close.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Select all of these '''edges '''using similar method and click on '''Apply and Close.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| In the''' geometry tree '''below '''''outlet''''' we see '''24 edges '''have been''' exploded.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Go to '''New Entity>>Group>>Create.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| To group these''' edges '''go to '''New Entity>>Group>>Create.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Select''' '''the''' Shape Type '''''as '''''Edge.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Select''' '''the''' Shape Type '''''as '''''Edge.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''''Select the Main Shape as Pipe_1 from the geometry tree.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''''Select the Main Shape as Pipe_1 from the geometry tree.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Select all of these exploded edges. '''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Now, select all of these exploded edges. '''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Add''' them by clicking on''' ''Add ''button.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Then, add''' them by clicking on''' ''Add ''button.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Name it as ''flowedges.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Name it as ''flowedges.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on '''Apply and close.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on '''Apply and close.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| We see,''''' flowedges'' group '''ha'''s '''been''' '''created.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Go to''' ''Mesh'' module '''from''' ''modules ''drop down option.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Go to''' ''Mesh'' module '''from''' ''modules ''drop down option.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Right click''' '''on '''''Mesh_1 '''''and click on''' ''Create Sub-mesh.'''''

| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Right click''' '''on '''''Mesh_1 '''''and click on''' ''Create Sub-mesh.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Select''' the''' geometry''' as '''''flowedges''.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Select the geometry as ''flowedges''.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| '''Select the algorithm, ''wire discretization.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Select the algorithm, ''wire discretization.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on first button to''' '''the right of the '''drop down menu.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now, to '''select''' the appropriate '''hypothesis '''click on first button to''' '''the right of the '''drop down menu.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on,''''' Nb. Segments''.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on,''''' Nb. Segments''.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Type the'' '''number of segment'' '''as''' '''30.
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Type the'' '''number of segment'' '''as''' '''30.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on '''''Ok. '''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on '''''Ok. '''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on '''''Apply and Close.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on '''''Apply and Close.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on '''''Mesh_1 '''''and click on''''' Compute.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now, click on '''''Mesh_1 '''''and click on''''' Compute.'''''

'''Refined mesh'' '''''has been created.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Close the '''window.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Close the '''window.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| We see''' mesh''' has been '''refined '''in the '''flow direction.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Go to '''''File>> Save As'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| To '''save '''this work,

Go to '''''File>> Save As'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Name the file as '''''Curved-geometry.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Name the file as '''''Curved-geometry.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Save the work on the '''Desktop.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| I am saving the work on the '''Desktop.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Close''''' Salome.'''''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Close''''' Salome.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Point to the file '''''Curved-geometry.hdf '''''on the''' desktop.'''
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| We see '''file '''has been '''saved as ''Curved-geometry.hdf.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 11: Summary
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| In this '''tutorial''' we have learned:

To create '''curved pipe geometry''' in '''''Salome.'''''

To '''mesh '''the '''geometry '''in''' ''Salome.'''''

To '''modify''' the '''mesh''' using''''' submesh.'''''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 12 : Assignment
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| For '''Assignment,'''

Create a pipe having '''inner diameter''' 6 '''units '''smaller than the '''outer diameter.'''

Change the '''angle '''of the '''bent.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 13 :

About Spoken tutorials
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| The video is available at the following URL:

http://spoken-tutorial.org/What_is_a_Spoken_Tutorial

It summarizes the Spoken Tutorial project.

If you do not have good bandwidth, you can download and watch it.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 14:

About Spoken tutorials
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| The Spoken Tutorial Project Team

-Conducts workshops using spoken tutorials

-Gives certificates to those who pass an online test

-For more details, contact@spoken-tutorial.org

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 15:

Acknowledgement

| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Spoken Tutorials are part of Talk to a Teacher project,

It is supported by the National Mission on Education through ICT, MHRD, Government of India.

This project is coordinated by http://spoken-tutorial

More information on this mission is available at,

http://spoken-tutorial.org/NMEICT-Intro

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| I am Saurabh Sawant from IIT Bombay, Thank you.

|}

OpenFOAM/C3/Downloading-and-installing-Salome/English

2013-06-28T11:03:41Z

File:Downloading and Installing Salome.odt

2013-06-28T08:10:20Z

P12575:

OpenFOAM/C3/Simulating-Hagen-Poiseuille-flow/English

2013-03-26T07:48:41Z

P12575: Created page with 'Tutorial: To simulate Hagen-Poiseuille flow in OpenFOAM. Script and Narration : Saurabh S. Sawant Keywords: Video tutorial,CFD. {| style="border-spacing:0;" | style="bord…'

Tutorial: To simulate Hagen-Poiseuille flow in OpenFOAM.

Script and Narration : Saurabh S. Sawant

Keywords: Video tutorial,CFD.

{| style="border-spacing:0;"
| style="border-top:0.05pt solid #000000;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| <center>Visual Cue</center>
| style="border:0.05pt solid #000000;padding:0.097cm;"| <center>Narration</center>

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 1:

| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Hello and welcome to the spoken tutorial on simulating '''Hagen-Poiseuille flow''' in '''OpenFOAM'''.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 2 : Learning Objectives

| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| In this tutorial we will see:

* To create and '''mesh 3D cylindrical pipe.'''<br/>

* To '''simulate '''the '''Hagen-Poiseuille flow''' <br/> having''' fixed pressure ratio''' across '''boundaries.'''<br/>

* To visualize the '''velocity contour '''in '''ParaView'''.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 3: System Requirement

| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| To record this tutorial

I am using '''Linux''' '''Operating system''' '''Ubuntu '''12.04

'''OpenFOAM version '''2.1.1

'''ParaView''' '''version '''3.12.0

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 4: Prerequisites

| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| To practice this tutorial learner should have the knowledge of

Basic '''Fluid Dynamics'''

and '''Hagen-Poiseuille''' '''flow'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 5:

Hagen-Poiseuille Flow Diagram

Read aloud the given points and show the contents in the diagram with the mouse pointer.
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Here is, '''Hagen-Poiseuille''' '''Flow''' Diagram.

We can see the '''dimensions and boundaries''' of the pipe.

'''Viscosity''' of fluid used, that is, water is given.

Pressure at the '''inlet''' is 20''' Pascals''' and '''outlet''' is 0''' Pascals.'''

As it is an '''incompressible flow''', only the pressure difference is of importance.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 6:

Formulas and Analytical Solution

Read aloud the given points
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Formulas and Analytical Solution:'''

For '''Hagen-Poiseuille flow,'''

'''Pressure drop''' along the pipe is:

('''P1 minus P2''') equals ('''32 mew Uaverage L''') upon ('''D square''')

By substituting the values from the previous diagram, we get,

'''Uaverage''' equals to 0.208 '''m/s'''

'''Maximum Velocity''' is given as,

Two times the '''average velocity''', which would be, 0.416''' m/s'''

'''Reynolds Number''' for the flow is,

'''Uaverage '''into '''D '''upon '''nu''', that comes out to be, '''2080'''

Hence, the flow is '''transient'''.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 7: Transient Solver

| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Type of solver used here is,

'''IcoFOAM'''

It is a '''Transient Solver'''

It is used for '''incompressible, laminar flow of Newtonian fluids.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 8:

Pressure Boundary Conditions

| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Pressure Boundary Conditions '''used,

At '''Inlet: fixedPressure'''

At '''Outlet: fixedPressure'''

At '''Walls: ZeroGradient'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 9:

Velocity Boundary Conditions

| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| '''Velocity Boundary Conditions''' used,

At '''Inlet: pressureInletVelocity'''

At '''Outlet: zeroGradient'''

At '''Walls: fixedValue'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Show 3dpipe folder.

Show the 3dpipe folder
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| For executing this case,

First, Let's create the '''case directory''' in ''''icoFoam'''' folder.

Give it some name.

I have named it as''' '3dpipe''''.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Point the mouse pointer from lid driven folder to 3d pipe folder.
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| To know the location of this folder, go through the tutorial on '''lid driven cavity'''.

Copy the ''''0' (zero), 'constant'''' and ''''system'''' folders of '''lid driven cavity''' problem in the newly created folder.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Go inside the 3dpipe folder.
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Let's go inside the ''''3dpipe'''' folder.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Hover the pointer over the folder inside the 3dpipe folder.
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| I have already copied the folders into my ''''3dpipe'''' folder and modified the files in it.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Go into the '0' folder and open P file and show it
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now, let's go into the ''''0'''' folder.

And open the ''''P'''' file.

This is the''' pressure boundary condition''' file.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Show the pressure boundary condition file and show the dimensions inside it.
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Note that the dimensions are in '''(meter square) per (second square)''' '''(m2/s2)'''.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Show the pressure value written
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Hence the''' pressure '''value in '''pascals''' is divided by '''density''', that is, 1000''' Kg/m3''' '''(Kg per meter cube),''' and written here.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Close the file
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Let's close the file.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Open U file in the same folder and show
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| File containing '''velocity boundary condition '''is as shown:

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Close the file and come out of the '0' folder
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Let's close the file and come out of the ''''0'''' folder.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Switch back to the slides
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| To see the '''blocking strategy''', let me switch back to the slides.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 10: Blocking Strategy

Hover the pointer on the geometry and drag it towards the z direction.
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| To create a '''3D geometry''' of a pipe I have made a '''2D''' circular '''geometry '''and extruded the length in the z direction.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Point out the numbering pattern.
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Numbering Pattern is as shown.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Minimize the slides
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| To see the '''blockMeshDict''' file, let's minimize the slides.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Go to folder 'constant' and then 'polyMesh' and open blockMeshDict file and show it.
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Let's go into the folder ''''constant',''' and then ''''polyMesh'.'''

Final '''blockMeshDict '''file is as shown:

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Close the file and come out of the folder 'constant'
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Let's close the file and come out of the ''''constant'''' folder.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Open and show transportProperties file and point at the value viscosity value
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| We see the ''''transportProperties' '''file.

Note the '''dynamic viscosity '''value, here, is 1e-06.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Close the file and come out of the 'constant' folder.
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Let's close the file and come out to the ''''constant' '''folder.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Go into the system folder and open the controlDict file. Show it.
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Let's go into the ''''system'''' folder.

Now, let's have a look at the ''''controlDict'''' file.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Show time step value
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| The '''time step''' has been set to 1e-03.

The solution '''converges''' after 18 seconds. The final '''time step''' is kept 19.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Close the file and the Home folder
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Let's close the file.

Let's close the ''''Home'''' folder.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Press 'control', 'alt' and 't' keys altogether
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now to '''execute''' the case, we will, first, go inside the ''''3dpipe'''' folder through terminal.Let's open the terminal by pressing ''''control', 'alt' '''and''' 't'''' keys, altogether.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Type run and press Enter in the terminal.
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Type '''run''' and press '''Enter'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Type cd (space) tutorials and press Enter
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Type '''cd''' '''(space) tutorials''' and press '''Enter'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Type cd (space) incompressible and press Enter
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Type '''cd (space)''' '''incompressible''' and press '''Enter'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Type cd (space) icoFoam and press Enter
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Type '''cd''' '''(space)''' '''icoFoam '''and press '''Enter'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Type cd (space) 3Dpipe and press Enter
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Type '''cd (space)''' '''3Dpipe '''and press '''Enter'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Type blockMesh and press Enter
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Now to create the '''mesh''', type '''blockMesh''' and press '''Enter'''.

'''Meshing''' has been done.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| After the meshing is done, type icoFoam to start the iterations
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| To start the '''iterations''' type '''icoFoam''' and press '''Enter'''.

We can see the '''iterations''' running.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| After the iterations are done, type paraFoam for postprocessing the results and press Enter.
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Iterations has been done.

After the '''iterations''' end type '''paraFoam''' for '''postprocessing''' the results and press '''Enter'''.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on Apply.
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Let's click on '''Apply''' on the left hand side of the '''Object inspector menu''' to see the''' geometry.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Rotate the geometry by pressing the button of the mouse and move it in the required direction.
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Let's rotate the '''geometry''' for a better view.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on the active variable control menu and select U in the drop-down menu
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Click on the '''active variable control menu''' and select '''U''' in the drop-down menu.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Click on play button
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| At the top, in '''VCR toolbar''', click on '''Play''' button.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Go to Object Inspector menu, go to Display, click on Rescale data range
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Go to '''Object Inspector menu''', go to '''Display''', click on '''Rescale''' '''data range.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| go to the toolbar named common, click on Clips and press Apply
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| To view the half section, go to the toolbar named '''common''', click on '''Clips''' and press '''Apply'''.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Open the color legent
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Let's open the '''color legend.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"|
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| We can see the '''maximum velocity''' is near to the actual '''maximum velocity'''.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Go to Filters> Data Analysis> Plot Over Lines
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| To view the graph Go to '''Filters'''> '''Data Analysis'''> '''Plot Over Lines.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| click on Y axis and press Apply
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Let's click on '''Y''' axis and press '''Apply'''.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Point towards the parabolic profile
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| We see the '''parabolic''' '''profile''' for '''Hagen-Poiseuille flow'''.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Close the graph
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Let's close the '''graph'''.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Close ParaView
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Close '''ParaView'''.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Switch to the slides
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Let's switch to the''' slides'''.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 11: Summary
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| In this tutorial we have learned:

To create '''3D pipe geometry.'''To simulate '''Hagen-Poiseuille flow''' for a '''fixed pressure ratio.'''

To visualize the '''velocity''' results in '''ParaView'''.

This brings us to the end of the tutorial.

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 12 : Assignment

| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| As an assignment,

Change the '''geometry parameters '''such as length and diameter.

Change the corresponding '''pressure ratio.'''

Use the fluid of different '''viscosity.'''

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 13: About Spoken tutorials

| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| * Watch the video available at the following link

* It summarises the Spoken Tutorial project

* If you do not have good bandwidth, you can download and watch it

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 14: About Spoken tutorials

| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| The Spoken Tutorial Project Team

* Conducts workshops using spoken tutorials

* Gives certificates for those who pass an online test

* For more details, please write to contact at spoken hyphen tutorial dot org

|-
| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;"| Slide 15: Acknowledgement

| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;"| Spoken Tutorial Project is a part of the Talk to a Teacher project

* It is supported by the National Mission on Education through ICT, MHRD, Government of India

* More information on this Mission is available at

* spoken hyphen tutorial dot org slash NMEICT hyphen Intro

|}