OpenFOAM/C3/Using-PyFoam-Utilities/English

From Script | Spoken-Tutorial
Revision as of 17:06, 28 February 2017 by Viraj20feb (Talk | contribs)

Jump to: navigation, search

Tutorial : 22

Name : Using PyFoam Utilities

Script : Anmol Sahoo and Rahul Joshi

Narration : Rahul Joshi

Keywords : OpenFOAM, PyFoam, CFD, Linux, PyFoam utilities,shockTube


Visual Cue
Narration
Show Slide : Title Welcome to the spoken tutorial on Using PyFoam Utilities
Show Slide : Learning Objectives In this tutorial we will learn :


  • About PyFoam Utilities
  • How to use PyFoam Utilites
  • How to run and plot data for the shockTube case using PyFoam Utilites


Show Slide :

System Requirement

To record this tutorial I am using:


  • Ubuntu Linux Operating System 14.04
  • OpenFOAM v2.3.0
  • PyFoam 0.6.5


Show Slide :

Pre-requisite

As a prerequisite user should have :
  • basic knowledge of running commands on the Linux terminal
  • And some experience of running and analyzing OpenFOAM cases


Show slide : Introduction to PyFoam Utilities Let me introduce you to PyFoam utilities.


  • Utilities are Python programs which come inbuilt with PyFoam.
  • Each utility has a specific function.
  • Utilities are executed from the command line.


Show slide : List of Utilities List of utilites that can be viewed using tab completion
Open terminal. Type pyFoam and press Tab twice Open the terminal


The list of utilities can be viewed by

  • typing pyFoam
  • and then pressing Tab key twice


Show slide : List of utilities Let me switch back to the slides.

Each utility can be executed with the –help option


This helps us to find out what it does and what its options are

Show Slide : using utilties


We are going to use the following PyFoam Utilities to run the Shock Tube case.


We will use -

  • PyFoamRunner.py
  • PyFoamSamplePlot.py

And then plot the necessary data using PyFoam

Show slide : PyFoamRunner.py PyFoamRunner.py can be used to run cases


It also generates log files for later use

Show slide : PyFoamSamplePlot.py This utility is used to plot the various data obtained from the previously set up sampleDict.



Show slide : Problem definition


Diagram

Shock Tube is an instrument -
  • used to replicate and direct blast waves at a sensor
  • to model actual explosion and their effects

In this case, the rectangular tube has low pressure on the right side and high pressure on the left side.


Both the pressures zones are seperated by a thin diaphgram.

Type run/tutorials/compressible/rhoCentralFoam Open the Terminal and type the path for rhoCentralFoam inside compressible solver.
Type ls Type ls

You can see the shockTube case

Type the command shown in Narration column Type:

cd $FOAM_TUTORIALS/compressible/rhoCentralFoam/

Type ls Now type ls. You can see the shockTube case
Type cd shockTube Type cd shockTube
Point to the 3 files You can see three folders 0.org , constant and system.
On Terminal type

cp -r 0.org 0

We need to copy the 0 file from 0.org


So type cp -r 0.org 0

Type cd system Now, go to the system folder by typing

cd system

Type

gedit sampleDict

Open the sampleDict file using the editor of your choice.
In sampleDict file, do as narrated


Go to the bottom of the file and Remove U.Component(0).


Replace it with Ux Uy and Uz.


Remove rho as well.

Save the file and exit Save and exit the file.
Type cd .. Go one level back by typing cd ..
Type blockMesh Run the command blockMesh to mesh the geometry.
Type setFields After this type setFields to set the pressure boundary condition.
Type

pyFoamRunner.py rhoCentralFoam

Now we will use the pyFoam utility of pyFoamRunner.py


Type pyFoamRunner.py <followed by name of the solver > i.e. RhoCentralFoam


This runs the case and creates a postProcessing log.

Switch to the terminal and type ls


Go back to the terminal and type ls.


We can see the log files which are generated.

Type sample Now type sample to run the sample utility.
Type

pyFoamSamplePlot.py ./ --dir=postProcessing/sets –info

After this we can plot for various time steps using-


pyFoamSamplePlot.py ./ --dir=postProcessing/sets –info


This will show which fields we have with us.

Type pyFoamSamplePlot.py ./ --dir=postProcessing/sets --field=T --mode=timesInOne | gnuplot Then type pyFoamSamplePlot.py ./ --dir=postProcessing/sets --field=T --mode=timesInOne | gnuplot
The output generated will be a png file.
Type ls


Highlight/point to the png file

Type ls.


We can see the png file which is generated.

Show slide : Summary Let us summarize.


In this tutorial, we learnt about PyFoam Utilities.


We also learnt to-

  1. Check for various pyFoam utilities
  2. pyFoamRunner.py to run the solver
  3. pyFoamSamplePlot utility to generate a png file


Show Slide


Forum to answer questions

Please post your timed queries in this forum.



Show Slide


Forum to answer questions

Please post your general queries on OpenFOAM in this forum.
Show Slide


Textbook Companion

The FOSSEE team coordinates the TBC project.
Show Slide

Acknowledgement


The Spoken Tutorial Project is funded by NMEICT, MHRD, Govt. of India


For more details , visit this website.

Thank You This is Rahul Joshi from IIT Bombay signing off. Thanks for watching

Contributors and Content Editors

Nancyvarkey, Viraj20feb