OpenFOAM/C3/Importing-mesh-file-in-OpenFOAM/English

From Script | Spoken-Tutorial
Revision as of 14:52, 22 December 2014 by Rahuljoshi (Talk | contribs)

Jump to: navigation, search
Visual Cue Narration
Slide 1 Hello and welcome to the spoken tutorial on Importing Mesh files in OpenFOAM
Slide 2 : Learning Objectives In this tutorial, you will learn how to:
  • import Mesh files
  • from a meshing software
  • in OpenFOAM.
Slide 3  : Pre-requisite As a pre-requisite, the user should know how to generate a Mesh in software

like -Gambit, Ansys ICEM , CFX, Salome etc.


Slide 4: System Requirement To record this tutorial I am using
  • Linux Operating system Ubuntu version 12.04.
  • OpenFOAM version 2.1.1
  • ParaView version 3.12.0
Slide 5:. Using blockMesh, we can easily make simple geometries.

For example- pipe, box, etc.

Narration, no visual cue It is difficult to create complex geometries using blockMesh.

But OpenFOAM supports importing mesh from third party meshing software.

There are commands available in OpenFOAM, to import these mesh files.

We will now learn how to import these files

Slide 7 : geometry for the case Point over the square cylinder point over its length and height point on inlet velocity
Here is the geometry of our case.


Contributors and Content Editors

Nancyvarkey, Rahuljoshi