Difference between revisions of "ExpEYES/C2/Conductivity-of-ionic-solutions/English-timed"

From Script | Spoken-Tutorial
Jump to: navigation, search
Line 18: Line 18:
 
|00:15
 
|00:15
 
|Here, I am using:
 
|Here, I am using:
* '''ExpEYES''' version '''3.1.0'''
+
* '''ExpEYES''' version 3.1.0
* '''Ubuntu Linux OS''' version '''14.04'''
+
* '''Ubuntu Linux OS''' version 14.04
  
 
|-
 
|-
Line 28: Line 28:
 
|-
 
|-
 
|00:35
 
|00:35
|Let's first define conductivity of a solution.
+
|Let's first define '''conductivity''' of a solution.
  
 
|-
 
|-

Revision as of 10:03, 12 July 2016

Time Narration
00:01 Hello everyone. Welcome to this tutorial on Conductivity of ionic solutions.
00:07 In this tutorial, we will learnt to:
  • Measure Conductivity and
  • Calculate the resistance of ionic solutions.
00:15 Here, I am using:
  • ExpEYES version 3.1.0
  • Ubuntu Linux OS version 14.04
00:23 To follow this tutorial, you should be familiar with ExpEYES Junior interface.

If not, for relevant tutorials, please visit our website.

00:35 Let's first define conductivity of a solution.
00:38 Conductivity of a solution is a measure of its ability to conduct electricity.
00:44 Conductivity of water is directly related to the concentration of ions dissolved in it.
00:51 Now we will demonstrate conductivity of tap water.
00:56 I will explain the circuit connections. A1 is connected to SINE.
01:02 Wires from SINE and A2 are dipped in glass tumbler containing tap water.
01:08 A 10K resistor is connected between A2 and GND. This is the circuit diagram.
01:16 Let's see the result on the Plot window.
01:20 On the Plot window, click on A1 and drag to CH1. A1 is assigned to CH1.
01:28 Click on A2 and drag to CH2.

A2 is assigned to CH2.

01:35 Move the mSec/div slider to adjust the waves. Two sine waves are generated.
01:43 Black trace is the original sine wave. Red trace is conductivity of tap water.
01:50 Click on CH1 and drag to FIT. Click on CH2 and drag to FIT.
01:56 Observe the voltage and frequency values on the right side of the window. Notice that voltage of tap water is very less compared to the input voltage.
02:08 Right click on CH1 to see voltages and Phase difference in degree.
02:15 Now we will measure conductivity of copper sulphate solution. To make the solution, one spatula of copper sulphate is dissolved in 100 ml of water.
02:27 In the same connection, wires from SINE and A2 are dipped in copper sulphate solution.
02:34 On the Plot window we can see the conductivity curve.
02:38 Red trace is conductivity of copper sulphate solution.
02:42 Increased conductivity is due to copper and sulphate ions present in the solution.
02:48 Observe the voltage and frequency values on the right.
02:52 Right click on CH1 to see voltages and Phase difference values.
02:59 Now, we will measure conductivity of dilute sulphuric acid solution. A few drops of dilute sulphuric acid are added to water.
03:09 Wires are dipped in sulphuric acid solution. Let's see the result on the Plot window.
03:17 Observe that black and red traces are almost coinciding with each other.
03:23 Conductivity of tap water has increased on adding a few drops of dilute sulphuric acid.
03:30 Observe the voltage and frequency values on the right.
03:34 Right click on CH1 to see voltages and Phase difference in degree.
03:41 We will measure conductivity of dilute Potassium hydroxide solution. A few drops of dilute Potassium hydroxide solution are added to tap water.
03:52 We can see that black and red traces are almost coinciding with each other.
03:58 Notice the increased conductivity of tap water on adding a few drops of Potassium hydroxide solution.
04:05 Observe the voltage and frequency values on the right side of the window.
04:11 Right click on CH1 to see voltages and Phase difference in degree.
04:18 Using the voltage values we have calculated the resistance of ionic solutions and tabulated the results.
04:27 Resistance value for tap water is 7.7 KOhm (kilo ohm).

Resistance value for copper sulphate solution is 1.2 KOhm.

04:38 Sulphuric acid solution is 0.17 KOhm and potassium hydroxide solution is 0.14 KOhm.

Notice that resistance values decreased with the increase in ionic concentration.

04:55 Let's summarize.
04:57 In this tutorial, we have learnt to:
  • Measure Conductivity and
  • Calculate the resistance of ionic solutions.
05:06 As an assignment,
  • Using sodium hydroxide, acetic acid and sodium chloride solutions measure conductivity and

calculate the resistance of ionic solutions.

05:18 This video summarizes the Spoken Tutorial project. If you do not have good bandwidth, you can download and watch it.
05:26 We conduct workshops using Spoken Tutorials and give certificates. Please contact us.
05:32 The Spoken Tutorial Project is funded by NMEICT, MHRD Government of India.
05:39 This tutorial is contributed by Kaushik Datta and Madhuri Ganapathi.

Thank you for joining.

Contributors and Content Editors

Pratik kamble, Sandhya.np14